Advertisement
Quick Links
User's Manual ShadowSense™ Touch
MultiSync® E705 SST
MultiSync® E805 SST
MultiSync® E905 SST
MultiSync® P403 SST
MultiSync® P463 SST
MultiSync® P553 SST
MultiSync® P703 SST
MultiSync® P801 SST
MultiSync® X651UHD-2 SST
MultiSync® X841UHD-2 SST
MultiSync® X981UHD-2 SST
Advertisement
Related Manuals for NEC ShadowSense Touch MultiSync E705 SST
Summary of Contents for NEC ShadowSense Touch MultiSync E705 SST
- Page 1 User’s Manual ShadowSense™ Touch MultiSync® E705 SST MultiSync® E805 SST MultiSync® E905 SST MultiSync® P403 SST MultiSync® P463 SST MultiSync® P553 SST MultiSync® P703 SST MultiSync® P801 SST MultiSync® X651UHD-2 SST MultiSync® X841UHD-2 SST MultiSync® X981UHD-2 SST...
- Page 2 B is located on the left back side of the monitor, above the OPS slot. (Figure 2) NOTE: On all ShadowSense touch displays from 84” up to 98”, the USB connector is located on the bottom of the right back side of the monitor. (Figure 3) Figure 1: Figure 2: © NEC Corporation 2016...
-
Page 3: Monitor Setting
Figure 3: 3. Turn on the monitor. *1: Please contact your NEC customer support for more detailed information. Monitor Setting Select the input signal. - Using slot 2 type PC (OPS): Select [OPTION] - Using external computer: Select the input signal which is supplied by the PC connected to USB connector. - Page 4 Operating System Support Summary © NEC Corporation 2016...
- Page 5 & eraser detection. NOTE: The latest NEC Dashboard configuration tool including user guide for the Dashboard tool is available for download on www.nec-display-solutions.com...
- Page 6 Re-Calibration If the cursor fails to follow exact finger position, the screen can be re-calibrated using the calibration process in the NEC Dashboard tool. NOTE: The following calibration process requires Dashboard version 2.0.6078.27074 or later. Open Dashboard and browse to the Configuration menu and begin by clicking the Calibration button under the Setup Hardware setting.
- Page 7 Users should not see a significant difference between the location of their finger or stylus, and the pointer that is shown on the screen. If the gap is more than a few millimeters apart then repeat the calibration process. © NEC Corporation 2016...
- Page 8 Figure 6: Green crosshair showing initial touch point Figure 7: Sweeping grey circle showing duration of hold (Light Grey = Time Held, Dark Grey = Time Remaining) © NEC Corporation 2016...
- Page 9 Figure 8: Green crosshair showing new registered touch point Figure 9: Calibration screen once all points are registered © NEC Corporation 2016...
-
Page 10: Disposal Instruction
This includes monitors and electrical accessories, such as signal cables or power cords. When you need to dispose of your NEC display products, please follow the guidance of your local authority, or ask the shop where you purchased the product, or if applicable, follow any agreements made between yourself and NEC.