1.5 APPENDIX
1.5.1
Operation Check of the Editor Lite
Inspect until "Write serial no" with the Serviceman Software Tool, and then reboot the
machine. Then, the machine starts in the state that the LED of upper [EL] button of
the machine is in the lighting. (The factory default is in this state.)
Perform the "starting" and the "operation check" in this state.
(1) After checking the Serviceman Software Tool, Reboot the machine.
Start the machine in the state that the LED (upper side of [EL] button) lights up.
LED on
(2) When the PC detects the machine, the "QL-700" screen is displayed.
Select the "P-touch Editor Lite" and click the [OK] button.
In the case of "EL mode", the left LED
turns on the light.
If the left LED is turned off the light, it
is "E mode".
Change the mode with the [EL] button.
Fig. 30 EL button On
Fig. 31 P-touch Editor Lite
1 - 20