Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. PLEASE KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
1.1
PERSONAL PRECAUTIONS
When using this multimeter, please observe all normal safety rules concerning:
Protection against the dangers of electrical current.
Protection of the meter against misuse.
Full compliance with safety standards can only be guaranteed if used with the test leads supplied. If necessary, they must be replaced with
genuine Sealey leads with the same electrical ratings. Failure to do so will invalidate the warranty.
DO NOT use leads if damaged or if the wires are bared in any way.
1.2
GENERAL SAFETY INSTRUCTIONS
Familiarise yourself with the application and limitations of the multimeter as well as the potential hazards.
IF IN ANY DOUBT CONSULT A QUALIFIED ELECTRICIAN.
When the meter is connected to a circuit, do not touch unused meter terminals.
When the magnitude of the value to be measured is unknown, set the range selector to the highest value available.
Before commencing testing, follow instructions below and select the correct input sockets, function and range on the multimeter.
Before rotating the rotary switch to change functions, disconnect the test leads from the circuit under test.
Take care when working with voltages above 60V DC or 30V AC rms. Keep fingers behind the probe barriers whilst measuring.
DO NOT test voltages above 600V - the circuitry of the multimeter may be destroyed.
WARNING! NEVER connect the multimeter to a voltage source / live circuit when the rotary switch is set to any other function apart from
Voltage testing
WARNING! NEVER perform resistance, transistor, diode or continuity measurements on live circuits.
DO NOT use the multimeter in a potentually explosive atmosphere.
Ensure that the rear cover is in place and fastened before using the multimeter.
Before attempting to insert transistors for testing, ensure that test leads have been disconnected.
Components should not be connected to the transistor socket or capacitor socket when taking voltage measurements with the test leads.
If any abnormal readings are observed, the multimeter must be checked out by an authorised technician.
When not in use, store the multimeter carefully in a safe, dry, childproof location out of direct sunlight. Storage temperature range -10°C to 50°C.
2. FEATURES
Quality tradesman's multimeter with easy to read 26mm LCD display. Features protective rubber boot, probe storage and integral stand.
Supplied with probe test leads.
Function
Measures
V
DC Voltage
V ~
AC Voltage
A
DC Current
A ~
AC Current
Ω
resistance
BATT
Battery Checker
(200)
Audible Continuity
(2k)
Diode Verification Mode
Transistor Verification Mode
hFE
1.
2.
3.
4.
5.
6.
7.
8.
9.
Red Lead
Input Limits
Connection
V/Ω
600V DC
V/Ω
600V AC (sine)
mA or 10A
10A DC
mA or 10A
10A AC
20M Ω
V/Ω
mA
9.0V
-
V/Ω
-
V/Ω
-
mA
Features:
LCD Display
on/off Button
Hold Button
rotary Switch
10A Socket
mA Socket
CoM Socket
V/Ω Socket
Transistor Testing Socket
InSTruCTIonS For:
DIGITAL MULTIMETER
7 FUNCTION
MoDEL no:
2
2
5
Original Language Version
MM24
7
6
9
MM24
Issue no: 2 - 02/07/10
1
3
4
8
Advertisement
Related Manuals for Sealey MM24
Summary of Contents for Sealey MM24
- Page 1 MM24 MoDEL no: Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 (a negative voltage will be shown if the probes are reversed). resistance range Diode Test DC Voltage range Continuity Test Transistor AC Voltage Test range Battery Test AC Current DC Current range range Original Language Version MM24 Issue no: 2 - 02/07/10...
- Page 3 Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to www.sealey.co.uk, email sales@sealey.co.uk or phone 01284 757500. NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.