Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear protective
instruction
gloves
manual
1. SAFETY
i
Maintain the tool and battery in good condition. Check moving parts alignment on a regular basis.
9
Replace or repair damaged parts. Use an authorised service agent and recommended parts only. Unauthorised parts may be
9
dangerous and will invalidate the warranty.
Ensure the tool is switched off before installing the battery pack.
9
Keep the tool and charger clean for best and safest performance.
9
Remove ill fitting clothing. Remove ties, watches, rings and other loose jewellery and contain long hair.
9
Evaluate your working area before using the tool; e.g. ceilings, floors and enclosures may contain electrical items or water piping.
9
Check workpiece to ensure that there are no nails or other items which may foul the saw blade.
9
Ensure battery pack is correctly inserted into the handle and latched in place before attempting to switch on tool.
9
Secure loose work pieces with a clamp, vice or other adequate holding device.
9
Avoid unintentional starting.
9
Wear approved safety eye protection (standard spectacles are not adequate).
9
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-skid shoes.
9
Hold the power tool by insulated gripping surfaces when performing an operation where the cutting accessory may contact hidden
9
wiring or its own cord.
Keep children and unauthorised persons away from the working area.
9
DO NOT use the tool where there are flammable liquids, solids or gases, such as paint solvents, etc.
8
DO NOT allow children to operate the tool.
8
DO NOT operate the tool if any parts are missing as this may cause failure and/or personal injury.
8
DO NOT hold unsecured work piece in your hand.
8
DO NOT leave the tool operating unattended.
8
DO NOT carry the tool with your finger on the power switch. DO NOT use the tool for a task it is not designed to perform.
8
DO NOT operate the tool when you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
DO NOT get the tool or battery charger wet or use in damp or wet locations.
8
2. INTRODUCTION
Compact, lightweight cordless reciprocating saw (body only) suitable for cutting wood and soft metals. Built-in quick blade change system and
safety guard. Supplied with single cutting blade. Locking button for added security. Requires compatible 10.8V 2Ah or 4Ah battery and mains
charger, sold separately.
3. SPECIFICATION
Model no .........................................................CP108VRSBO
Consumable parts ..................................................................
CP108VBP ................ 2Ah Battery Lithium-ion (not included)
CP108VBP4 .............. 4Ah Battery Lithium-ion (not included)
WRS3021/150 Reciprocating Saw Blade 150mm 6tpi - Pack of 5
Stroke Length............................................................... 20mm
Max. Cutting Depths:
Wood ........................................................................... 80mm
Metal .............................................................................. 3mm
Noise power/pressure .......................................... 95/84dB(A)
No-load speed .......................................................0-2700rpm
Replacement parts .................... CP108VMC - Mains Charger
Vibration/Uncertainty ........................................ 9.154/1.5m/s²
© Jack Sealey Limited
10.8V CORDLESS RECIPROCATING SAW - BODY
ONLY
CP108VRSBO
MODEL NO:
Wear eye
Wear ear
Wear a mask
protection
protection
Original Language Version
CP108VRSBO Issue:1 19/04/21
Advertisement
Related Manuals for Sealey CP108VRSBO
Summary of Contents for Sealey CP108VRSBO
- Page 1 CP108VRSBO MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 DO NOT use solvents clean with a soft damp cloth. DO NOT use compressed air (risk of ejection). 6.2. Professional repair only, contact authorised service centre. 6.3. STORAGE: Store in a child free,dry location. Original Language Version © Jack Sealey Limited CP108VRSBO Issue:1 19/04/21...
- Page 3 Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 36 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk...