Table of Contents
Advertisement
HIGH POWER
This function acts to raise the power but keeps the AC system in
the same operating mode.
This function is set with the HIGH POWER button on the remote
controller.
(It can be set regardless of the temperature and fan speed
settings.)
HIGH POWER operation from remote controller
The unit operates at maximum output for 30 minutes,
regardless of the desired temperature.
The fan speed is 1 step above "High."
Frequency
MAX
0
30 min.
Start
NOTE
•
When HIGH POWER operation ends, the unit operates at low
Hz for 5 minutes, regardless of the thermostat OFF conditions.
•
When in DRY mode, operation is in the cooling zone.
Lamp colors
OPERATION lamp
HEAT operation
DRY operation
COOL operation
FAN operation
DEFROSTING operation
TIMER lamp
LED CLEAN lamp
Timer backup
•
Operation stops if there are no operator controls for 25 hours or
longer after unit operation switched from OFF to ON by use of
ON timer operation.
Time
5 min.
End
Red
Orange
Green
Green
Red and Orange
alternately
Green
Green
NIGHT SETBACK
•
When NIGHT SETBACK operation is set, the temperature and
fan speed settings will be adjusted automatically to allow
comfortable sleep.
•
When NIGHT SETBACK operation is set, "
the remote controller. The main unit display lamp also becomes
dimmer.
COOL and DRY modes
When the night setback mode is selected, the air conditioner
automatically raises the temperature setting 2°F(1°C) when 30
minutes have passed after the selection was made, and then
another 2°F(1°C) after another 30 minutes have passed,
regardless of the indoor temperature when night setback was
selected. This enables you to save energy without sacrificing
comfort. This function is convenient when gentle cooling is
needed.
Setting
temperature
2°F(1°C)
Press the NIGHT
SETBACK button
HEAT mode
When the night setback mode is selected, the air conditioner
automatically lowers the temperature setting 4°F(2°C) when 30
minutes have passed after the selection was made, and then
another 4°F(2°C) after another 30 minutes have passed,
regardless of the indoor temperature when night setback was
selected. This enables you to save energy without sacrificing
comfort. This function is convenient when gentle heating is
needed.
Setting
temperature
Press the NIGHT
SETBACK button
36
mark" appears on
2°F(1°C)
30 min.
30 min.
Time
4°F(2°C)
4°F(2°C)
30 min.
30 min.
Time
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
