Advertisement
Quick Links
thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer to
instructions
1. safety
warninG! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this bench.
‰
locate bench in a suitable working area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
warninG! use bench on level and solid ground, preferably concrete. Avoid tarmacadam since the bench may sink into the surface.
‰
Keep the bench clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the working area.
9
do not use the bench for any purpose other than that for which it is designed.
8
do not exceed maximum capacity of workbench.
8
do not undertake work on the bench without the work piece being adequately secured. use clamps or a vice (not included) to secure the
8
work piece. Available from your sealey dealer.
do not use the bench out of doors.
8
do not get the bench wet or use in damp or wet locations or areas where there is condensation.
8
do not clean the bench with any solvents which may damage the paint surface or the protective coating on the wooden top.
8
2.
introduction
i
Heavy duty powder coated metal frame with a 40mm MDF work surface. Two configurations available with a combination of lockable drawers
and cupboards. Features adjustable feet to help stability when placing on an uneven surface. Supplied flat packed with two keys.
3. specification
model no: ................................................................ AP1372B
size (W x d x H):...................................1200 x 600 x 865mm
drawer (x3): ............................................415 x 160 x 415mm
capacity: ...................................................................... 300kg
4. contents
4.1.
panels etc.
Part
description
A
top
B1
left side
B2
right side
c
Bottom
d
support
e
drawer
f1
door
g
shelf
H
Back
i
leg leveller assy.
J1
left slide
J2
right slide
© Jack sealey limited
instructions for
workstation with 3 drawers & cupboard
model no:
Quantity
1
1
1
1
1
3
1
1
2
4
3
3
Original Language Version
ap1372b
AP1372B | issue 1 07/04/16
Advertisement
Related Manuals for Sealey AP1372B
Summary of Contents for Sealey AP1372B
- Page 1 Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 Bolts st4. 8x10mm 10+2 Plastic rivet 16+4 Plastic pin 4.3. Before assembly check contents against the contents lists. 5. asseMbly step 1 step 2 step 3 step 4 Original Language Version AP1372B | issue 1 07/04/16 © Jack sealey limited...
- Page 3 6 step 5 step 7 Original Language Version AP1372B | issue 1 07/04/16 © Jack sealey limited...
- Page 4 12 months from purchase date, proof of which will be required for any claim. sole uK distributor, sealey group. 01284 757500 www.sealey.co.uk Kempson Way, suffolk Business Park, Bury st. edmunds, suffolk. 01284 703534 sales@sealey.co.uk iP32 7Ar Original Language Version AP1372B | issue 1 07/04/16 © Jack sealey limited...