Table of Contents
Advertisement
Aligning the Print Head
If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head
position.
Note
• If the remaining ink level is low, the print head alignment sheet will not be printed correctly.
Replace the ink tank
• If ink runs out as the print head alignment sheet is printed, an error message appears on the touch
screen.
An Error Occurs
You need to prepare: two sheets of A4 or Letter-sized plain paper
1.
Check that printer is turned on.
2. Load two sheets of A4 or Letter-sized plain paper in cassette.
After inserting the cassette into the printer, the paper setting confirmation screen appears on the touch
screen. If the page size shown on the touch screen is A4 or Letter, select Yes. If not, select Change
and change the page size to A4 or Letter.
Note
• Be sure to load paper in the cassette. If you load paper on the rear tray, the print head alignment
sheet is not printed.
3. Open operation panel and pull out paper output tray.
4. Select
(Setup) on HOME screen.
Using the Operation Panel
The setup menu screen will appear.
whose ink is low.
173
Advertisement
Table of Contents
