hit counter script
Cisco Catalyst 3032 Getting Started Manual
Cisco Catalyst 3032 Getting Started Manual

Cisco Catalyst 3032 Getting Started Manual

Cisco systems catalyst blade switch getting started guide
Hide thumbs Also See for Catalyst 3032:

Advertisement

Quick Links

Cisco Catalyst Blade Switch
3130 for Dell and Cisco Catalyst Blade
Switch 3032 for Dell

Getting Started Guide

This guide provides instructions on how to install the Cisco Catalyst Blade Switch
3130 for Dell and the Cisco Catalyst Blade Switch 3032 for Dell—both hereafter
referred to as the switch—in the Dell Modular Server Chassis and how to set up
and configure your switch. The Dell Modular Server Chassis—hereafter referred
to as the server chassis—is a system that supports up to sixteen server modules
and up to six Ethernet switches. You install the switch in one of the chassis I/O
module bays on the rear panel of the server chassis.
Also covered in this guide are switch management options and troubleshooting
help for the switch.
For details on the number, types, and the location of the module bays and for
additional information on the entire modular server system, see the
documentation for the Dell PowerEdge Systems at
www.support.dell.com.
For additional installation and configuration information about the switch, see the
Cisco Catalyst Blade Switch 3000 Series for Dell documentation on Cisco.com.
For system requirements, important notes, limitations, open and resolved caveats,
and last-minute documentation updates about the switch, see the release notes,
also on Cisco.com.
When you use the online publications, refer to the documents that match the Cisco
IOS software version that is running on the switch.
Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide
1
OL-14317-01

Advertisement

Table of Contents
loading

Summary of Contents for Cisco Catalyst 3032

  • Page 1: Getting Started Guide

    When you use the online publications, refer to the documents that match the Cisco IOS software version that is running on the switch. Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide OL-14317-01...
  • Page 2: Table Of Contents

    Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide Contents For translations of the warnings that appear in this publication, see the Regulatory Compliance and Safety Information for the Cisco Catalyst Blade Switch 3000 Series for Dell that accompanies this guide.
  • Page 3: Taking Out What You Need

    Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide Taking Out What You Need These items ship with your switch: Follow these steps: Unpack and remove the switch and the accessory kit from the shipping box.
  • Page 4 Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide Switch Description The switch runs the universal software image that has the Cisco IOS code for multiple feature sets. To enable a specific feature set, you must use the software activation feature to install the software license for that feature set.
  • Page 5 Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide Table 1 Table 1 Cisco Catalyst Blade Switch 3130 for Dell and 3032 for Dell Port Descriptions Port Description Ports 1 to 16 Internal Gigabit Ethernet 1000BASE-X downlink ports that connect the switch to the server chassis blades.
  • Page 6: Dell Modular Server Chassis Architecture

    Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide Dell Modular Server Chassis Architecture Dell Modular Server Chassis Architecture The six chassis I/O module bays are on the rear panel (see...
  • Page 7: Installation Warning Statements

    Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide Dell server chassis Primary CMC module Switch installed in I/O module A1 I/O module B1 I/O module C1 Optional iKVM module 1. CMC: Chassis Management Controller.
  • Page 8: Installing The Switch In The Server Chassis

    Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide Installing the Switch in the Server Chassis Ultimate disposal of this product should be handled according to all national Warning laws and regulations. Statement 1040...
  • Page 9 Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide You can install the switch into any of the module slots. If you install a – switch in the B or C module slot, the Ethernet mezzanine card must be installed in the blade server.
  • Page 10 Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide Installing the Switch in the Server Chassis Ensure that the release latch on the switch is in the open position or perpendicular...
  • Page 11 Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide Figure 4 shows the switch being inserted into the server chassis. Figure 4 Switch Server chassis Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide...
  • Page 12: Configuring The Switch

    Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide Configuring the Switch Configuring the Switch To run the system configuration dialog, you must first connect the switch to a PC Note to run a terminal emulation program.
  • Page 13 Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide Figure 5 Step 2 Start the terminal emulation session so that you can see the output display from the power-on self-test (POST). The terminal-emulation software—a PC application such as Hyperterminal or ProcommPlus—makes communication...
  • Page 14 Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide Configuring the Switch Connecting through the DRAC/MC Follow these steps when connecting through the DRAC/MC: Connect one end of a DB9 null-modem or crossover cable to the RS-232 console Step 1 serial port of the DRAC/MC.
  • Page 15: Waiting For Post To Complete

    Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide Redirect the DRAC/MC console to the switch internal serial console interface. Step 4 Enter this command at the DRAC/MC command prompt: connect switch-N where N is the chassis I/O module bay number in which the switch is inserted.
  • Page 16: Completing The Initial Configuration

    Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide Configuring the Switch Make sure that the System Status/ID LED on the switch is off. This means that Step 4 the switch is operating properly.
  • Page 17 Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide Enter an enable secret password, and press Return. Step 3 The password can be from 1 to 25 alphanumeric characters, can start with a number, is case sensitive, allows spaces, but ignores leading spaces.
  • Page 18 Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide Configuring the Switch You have now completed the initial configuration of the switch, and the switch displays its initial configuration. An example of the output is shown here:...
  • Page 19 Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide Disconnect the server chassis serial port or the switch console port from the PC. Step 11 See the “Managing the Switch” section on page 20 configuring and managing the switch.
  • Page 20: Managing The Switch

    Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide Managing the Switch Managing the Switch After completing the initial setup and configuration steps, use the CLI, the device manager, or other management options described in this section for further configuration.
  • Page 21 Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide Figure 6 Device Manager Dashboard Follow these steps to access the device manager: Launch a web browser on your PC or workstation.
  • Page 22: Planning And Creating A Switch Stack (Only 3130G-S And 3130X-S Switches)

    Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide Planning and Creating a Switch Stack (Only 3130G-S and 3130X-S Switches) Other Management Options You can use SNMP management applications such as CiscoWorks. You also can manage it from an SNMP-compatible workstation that is running platforms such as SunNet Manager.
  • Page 23 Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide To assign a priority value after you have installed and initially configured the first switch, see the page When you connect the StackWise Plus cables and create a stack, you can •...
  • Page 24 Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide Planning and Creating a Switch Stack (Only 3130G-S and 3130X-S Switches) Stack Cabling Configuration Example This section shows one stacking example in which a single chassis with two switches in a single server chassis create one stack.
  • Page 25 Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide Connecting the StackWise Plus Cables Follow these steps to connect the StackWise Plus cables: Remove the dust covers from the StackWise Plus cables, and store them for Step 1 future use.
  • Page 26: Connecting To The Switch Ports

    Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide Connecting to the Switch Ports Connecting to the Switch Ports This section describes how to connect to the fixed switch ports and to the 10-Gigabit Ethernet module slots.
  • Page 27 Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide Installing and Connecting to Devices in the 10-Gigabit Ethernet Slots The switch 10-Gigabit Ethernet module slots are used for connections to other switches and routers.
  • Page 28: In Case Of Difficulty

    Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide In Case of Difficulty Verify Port Connectivity After you connect a device to the switch port, the port LED turns amber while the switch establishes a link.
  • Page 29: Resetting The Switch Configuration

    Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide Resetting the Switch Configuration This section describes how to reset the switch configuration by rerunning the initial configuration dialog (System Configuration Dialog). These are reasons...
  • Page 30: Obtaining Documentation, Obtaining Support, And Security Guidelines

    Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide Obtaining Documentation, Obtaining Support, and Security Guidelines For More Information For more information about the switch, see these documents on Cisco.com: Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch •...
  • Page 31: Hardware Warranty Terms

    Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide Hardware Warranty Terms This section describes the warranty terms for the switch. Dell Hardware Warranty Terms Note Important Note about Your Warranty: The limited warranty below reflects the extent of the Cisco warranty for the Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell.
  • Page 32 Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide Hardware Warranty Terms Click Go. The Cisco Limited Warranty and Software License page from the Information Packet appears. Read the document online, or click the PDF icon to download and print the document in Adobe Portable Document Format (PDF).
  • Page 33 Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide To Receive a Return Materials Authorization (RMA) Number Contact the company from whom you purchased the product. If you purchased the product directly from Cisco, contact your Cisco Sales and Service Representative.
  • Page 34 Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide Hardware Warranty Terms This document is to be used in conjunction with the documents listed in the “For More Information” section. CCVP, the Cisco logo, and the Cisco Square Bridge logo are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn is a service mark of Cisco Systems, Inc.;...

This manual is also suitable for:

Catalyst 3130

Table of Contents

Save PDF