Page 1 1. The Basics 2. The Components 3. Features 4. Specifications and Parts List Product Description (5.00)
Page 2 No representation is made that this manual is complete or accurate in all respects and NEC Unified Solutions, Inc. shall not be liable for any errors or omissions. In no event shall NEC Unified Solutions, Inc. be liable for any incidental or consequential damages in connection with the use of this manual. This document contains proprietary information that is protected by copyright.
Page 3: Table Of Contents
Aspire Optional Feature Equipment ........44...
Page 4 Table of Contents Central Office Calls, Answering........84 Central Office Calls, Placing .
Page 5 Table of Contents i-Series Telephones..........122 InDepth Lite, inDepth and inDepth+ .
Page 6 Table of Contents Ring Tones, Selectable ..........162 Ringdown Extension, Internal/External .
Page 7 Aspire M/L System Specifications ........216...
Page 8 Table of Contents Product Description...
Page 9: Section 1: The Basics
IP network. The signals travel through the IP network but do not “go through” the switch as they do in traditional tele- phony. The fact that Aspire can function in and support a “hybrid” network with traditional digital/analog switching, IP/TDM/IP switching and pure peer-to-peer...
Page 10 Reduced brick and mortar expenses by deploying main ofÞce features to ● remote personnel. Node-to-Node Peer-to-Peer IP Connectivity In LAN The Aspire unit assists in the call setup process and provides the full range of Aspire Aspire Cabinet telephony features.
Page 11 Section 1: The Basics Elegant Sophisticated Design Aspire’s Voice over IP (VoIP) capability allows you to place voice calls over the data network . VoIP reduces long distance charges by using IP to connect multiple ofÞce locations and telecommuters. Remote workers also have access to main ofÞce features, such as voice mail, allowing ofÞces to operate as a single unit.
Page 12 Section 1: The Basics Aspire Versatility Feature List Usability Serviceability Scalability • Toll Restriction • Built-in Headset Jack • On-line Programming • Application Processors • User Programming • Call Coverage Keys • Remote Programming • IP Keysets • Walking Class of Service •...
Page 13: Section 2: Components
Section 2: Components Section 2: Components The Telephones ✍ Make a note. . . For your convenience. . . there is a Parts List located at the end of this guide. You should Þnd this list helpful when selecting system equipment. More detailed tools are also available — ask your Account Representative for the speciÞcs.
Page 14 Section 2: Components 34-Button Display Telephone — P/Ns 0890045 & 0890046 The 34-Button Display Telephone has a 3-line, 24-character dis- play with four interactive soft keys for intuitive feature access. In addition, the 34-Button Display Telephone has 24 user-program- mable function keys (with Dual LEDs) for one-button access to co-workers, features and outside lines.
Page 15 PSA Adapter: Cordless Telephone — P/N 730088 & 730087 The Aspire System, with software 1.07 or higher, supports the Cordless Telephone. The DTR-4R-2 Cordless II (P/N 730088) is a 900 MHz spread-spectrum digital cordless telephone that provides mobility, ßexibility and convenience for those who spend much of the workday away from their desk.
Page 16 Lite II phone is recommended. This phone provides 30 channels. Aspire Wireless (DECT) Phones — P/N 780004 The Aspire system, with software 2.16 or higher, provides the ability to use 2.4 GHz DECT (Digital Enhanced Cordless Telecommunication) phones. These phones provide you with the freedom and conveniences of a wireless phone, but in addition, you also have access to features provided by the Aspire system.
Page 17: Keyset Adapters
Section 2: Components Keyset Adapters Each Aspire keyset (except the 2-Button telephone) accepts the following optional adapters, though there are limitations with phone types (such as IP) and adapter compatibility. Each telephone can have up to two adapters installed except when an IP adapter is used. This adapter uses the full space on the keyset, preventing any other adapter installation.
Page 18 Provides the ability to communicate through a LAN which is connected to a VOIPU or 8SHUBU PCB. The VOIPU or 8SHUBU PCB is required in order to communicate with non-VoIP Aspire phones, as well as to place or receive outside calls. This adapter cannot be used on a Super Display telephone.
Page 19 4 = Due to protocol collision, the CTU and CTA adapters can not both be used on the same keyset. 5 = The ADA2 and PSA Adapters can only be installed on the Aspire IPhone, which only has one adapter connection.
Page 20: Optional Equipment
● External Ringing The Aspire S supports a total of 10 2PGDAD modules on the system which can be used within the feature maximums indicated above. The Aspire supports a total of 56 2PGDAD modules on the sys- tem which can be used within the feature maximums indicated above.
Page 21 24-button DLS Console installed, but each extension in the system can have a 24-button Console (maximum of 24 on Aspire S or 256 on Aspire). An extension can have a 24-button DLS Console and 4 110-button DSS consoles installed/ assigned.
Page 22 The NTCPU also provides 1 relay. This relay is deÞned as relay ‘0’ in program- ming. The relays on the 2PGDAD modules are numbered 1-8. The system can have up to four (Aspire S) or eight (Aspire) Door Boxes. Headsets Headsets are perfect for users who spend a lot of time on the phone.
Page 23 As such, it generally would not be connected directly to a telephone line or an analog station port. It is speciÞcally designed to interface with an Aspire 22/34-button keyset equipped with an APA or APR Adapter.
Page 24 Voice Security Recorder (P/N 780275) is a USB device that taps across the digital extension pair of the NEC telephone system allowing digital recording of the keyset user’s conversation. The Þle created is saved either to the local PC or to a network location, depending on the application’s setup.
Page 25: Aspire S Common Equipment
CPU memory. The KSU can be ßoor, wall or rack mounted. The CPU, which is pre-installed, controls all the functions and operations of the Aspire system using the system software loaded into the CPU memory. One 32-bit CPU is installed in the system cabinet.
Page 26 PCPro/WebPro via a LAN connection. The VoIP PCB, which is required in order for IP telephones to communicate with non-VoIP Aspire phones, as well as to place or receive outside calls, must be connected to an external switching hub.
Page 27: Aspire S Trunk Pcbs
PoE, the NEC BlueFire 200/24 switch is recommended. This unit provides layer 2 switch capability in addition to being able to supply ethernet power to 24 NEC IP terminals. For this unit, power feeding is through the signal pair (1/2, 3/6) or spare pair (4/5, 7/8).
Page 28: Aspire S Station Pcbs
PCBs installed will reduce the number of 4SLIDB PCBs which can be installed. If 3 4SLIU PCBs are installed, only 1 4SLIDB can be installed. If 4SLIU PCBs are installed, the 4SLIDB can not be used. There must be enough available ports in order for the Aspire system to recognize an 4SLIU PCB.
Page 29 Section 2: Components 4 Analog Station Expansion Daughter Board (4SLIDB-S) — P/N 0891049 The 4SLIDB daughter board provides: ● 4 analog extension ports (used for on-premise analog telephones, fax machines, and analog modems) ● Connector for 4SLIU PCB ● Ring Generator ●...
Page 30 8 Port IntraMail Compact Flash Card — P/N 0892177 The IntraMail is a plug-in “in-skin” full-featured, DSP-based integrated Voice Mail with Auto- mated Attendant for the Aspire S (with software 2.50 or higher). This card is installed on the DSP Resource daughter board.
Page 31 The separate software hub should be a 100Base/full duplex hub. To avoid network problems and to ensure good voice quality, do not use a Repeater Hub/10Base. The Aspire VoIP supports H.323, H.325, and H.245 trunks and compressions of G.711, G.723.1, and G.729.
Page 32 IP ports. If the number of trunk ports reserved by the system is a concern (as it could be with the Aspire S system), install the trunk cards Þrst, then install the VOIPU PCB. This will allow the trunks to be assigned to the COIU, DIOPU, etc.
Page 33 One-Touch (Personal Speed Dial) keys and 15 additional Þxed feature keys. The 34-Button Aspire IPhone has a built-in speakerphone and can accept optional IP adapters (PSA, ADA2). You can also assign 110-Button DSS Consoles to these phones, but they must be on site (not networked).
Page 34 With Soft Phone software 1.0.3.0 or higher and Aspire system software 4.93 or higher, a USB cam- era can be connected to the Aspire Soft Phone PCs, allowing a user to make a phone call to another user registered on the same system and provide a video transmission for the call (as long as both users have a USB camera connected and the Aspire Soft Phone application installed with a serial key providing the video function).
Page 35 IP terminal device. This provides an addi- tional way to power the NEC IP terminals (Aspire IPhone or Aspire Keyset with IP Adapter). With this adapter, the IP terminals on the Aspire can be powered using: ●...
Page 36: Aspire (M/L And Xl) Common Equipment
Note: The Aspire XL system can support mixed hardware conÞgura- tions. With an Aspire XL AC/DC power supply cabinet and a DC/ DC Converter in one cabinet, the second cabinet can contain up to two Aspire M/L power supplies (P/N 0891000).
Page 37 The 64-port basic CPU (P/N 0891002), with the basic factory-installed PAL chip, provides: ● 64 ports maximum for trunks, extensions, voice mail (internal or external), Aspire Wireless 2.4 GHz and IP Phones With software 4.93+, if all 64 ports are required and IntraMail is not being used, set Program 47-01-17 to “0”...
Page 38 - Aspire XL: 384 analog/digital extensions - Aspire M/L or XL: NEC Wireless 2.4 GHz and IP Phones can have a maximum of 512 ports, however, more than 256 (Aspire M/L) or 128 (Aspire XL) Wireless and IP phones reduces the number of available extension ports.
Page 39 Aspire XL Power Supply Set — P/N 0890069 This set contains a power supply and DC/DC Converter required to convert an Aspire M/L system to an Aspire XL system, with expanded physical port capacity. This kit includes the following: ●...
Page 40 A DC/DC Converter replaces the two power supplies (P/N 0891000) used in the system cabinet of the Aspire M/L system. If an Aspire M/L system is upgraded to an Aspire XL, the existing power supplies will no longer be required as they are replaced by the DC/DC Converter.
Page 41 The 19” Rack Mount Bracket is required to install the KSU onto a 19” rack mounting system. If rack-mounting all three cabinets of an Aspire XL system, the power supply cabinet (P/N 0890068) must be mounted on a separate bracket due to the bracket weight requirements (150 lbs maximum).
Page 42: Aspire Trunk Pcbs
Section 2: Components Aspire Trunk PCBs 4 CO Loop Start Trunk Card (4COIU-LS1) — P/N 0891005 There are two different types of the COIU PCB. One providing ground start trunks - the other is for loop start trunks only. The 4COIU-LS1 PCB provides: ●...
Page 43 Section 2: Components 4 CO Loop Start/Ground Start Trunk Card (4COIU-LG1) — P/N 0891029 There are two different types of the COIU PCB. One providing ground start trunks - the other is for loop start trunks only. The 4COIU-LG1 PCB provides: ●...
Page 44 Section 2: Components T1/PRI Interface Card (1PRIU) — P/N 0891009 For T1 and ISDN Primary Rate Interface (PRI) applications, install a T1/PRI Interface PCB. This PCB has a single 24-channel 64Kb/s digital signal circuit which can be conÞgured for either T1 trunks or PRI. Each PCB connects to the network via an NTI Network Termination.
Page 45 The trunk circuit can be connected to either an ISDN trunk or ISDN telephone set, depending on the SW102 through SW202 switch settings. When used for S-Bus, a maximum of 8 ISDN terminals can be connected to each circuit. Two ISDN telephone circuits (1-2) are supplied with DC power from the Aspire system. Product Description...
Page 46 The Þrst 4 ISDN telephone circuits (1-4) are supplied with DC power from the Aspire system. If the last four circuits (5-8) are to be used for S-Bus, they must use ISDN telephone sets which provide their own local power supply as the system does not provide DC power to these circuits.
Page 47: Aspire Station Pcbs
VoIP telephone. The 32ESIU requires one universal slot, with a maximum of 8 per Aspire M/L sys- tem (4 max. per cabinet) or 12 PCB’s per Aspire XL system (8 max. per cabinet). When more than 4 ESIU PCBs (128 ports) are installed in a cabinet, a Power Supply set is required (P/N 0890069).
Page 48 Section 2: Components 8 Aspire Digital Card (8ESIU) — P/N 0891015 The 8ESIU PCB provides: ● 8 digital extension circuits (used for digital telephones, DSS consoles, 1SLTAD adapters, 2PGDAD adapters) ● 2 extension status LEDs (each LED indicates status for 4 extensions - BL1 used for ports 1-4, BL2 for ports 5-8) ●...
Page 49 257-512 if automatically selected). As the Base Stations are powered by the DSIU PCB, whenever a DSIU PCB is installed in an Aspire cabinet, two power supplies must be installed. Only one DSIU PCB can be installed in a system with a maximum of 120 handsets connected. This PCB does not consume any ports - the ports are assigned as the telephones are registered to the system.
Page 50 DSIU PCB (any version) can support a maximum of 32 conversations at one time. 16 i-Series Phone PCB (16DSTU) — P/N 0891016 The i-Series Phone Card adds to the Aspire system the ability to connect up to 16 i-Series telephones with each port supporting 1 B-channel. The 16DSIU is installed in a universal slot, with 15 maximum per system.
Page 51 ● ● Data Module Off-Hook Voice Announce Module ● Speakerphone Module ● Super Display Phones When using i-Series phones on the Aspire system, the following features are NOT supported: ● ● Directory Dial Super Display Operation ● Soft Keys ●...
Page 52: Aspire Optional Feature Equipment
P/N 780136 The Base Station, also known as the Radio Fixed Part (RFP), provides the link from the Aspire Wireless phone to the Aspire system. The Base Station is connected to the DSIU PCB using standard two wire (twisted pair) telephone cable, CAT 4 or CAT 5. No local power is required for the Base Station as it receives it power from the Aspire system.
Page 53 Section 2: Components Aspire Wireless (DECT) Deployment Kit — P/N 780146 The Deployment Kit consists of two 2.4GHz Aspire Wireless handsets, a special base station, and connecting cables all packed into a handy hard-shell briefcase. Before installing the Aspire Wire- less equipment, the deployment and diagnostics tool can be used to Þnd the best place for the...
Page 54 The 4 Port Aspire Mail Plus Expansion Daughter Board (P/N 0891034) adds an additional 4 voice mail ports to Aspire Mail Plus (for a total of 8 ports). There is a maximum 1 daughter board per Aspire Mail PCB, with the daughter board using 4 ports.
Page 55 2-to-4 Port Aspire Mail Upgrade — P/N 0891044 The Aspire Mail 2-to-4 Port Aspire Mail Upgrade (P/N 0891044) is a software upgrade that allows you to expand your Aspire Mail system from 2 to 4 ports. This upgrade does not provide additional mailboxes or message storage.
Page 56 PCM signal format and connects to the PCM time division switch. The 4VOIPU PCB is required in order for IP telephones to communicate with non-VoIP Aspire phones, as well as to place or receive outside calls. This PCB can be used with either the Basic or Enhanced version of the NTCPU (P/N’s 0891002 and 0891038).
Page 57 PCM signal format and connects to the PCM time division switch. The 16VOIPU PCB is required in order for IP telephones to communicate with non-VoIP Aspire phones, as well as to place or receive outside calls. The 16VOIPU PCB provides: ●...
Page 58 100Base-TX, 10Base-T and Full/Half Duplex. The 4VOIPU or 16VOIPU PCB, which is required in order for IP tele- phones to communicate with non-VoIP Aspire phones, as well as to place or receive outside calls, must be connected to either an external switching hub or to the 8SHUBU PCB.
Page 59 One-Touch (Personal Speed Dial) keys and 15 additional Þxed feature keys. The 34-Button Aspire IPhone has a built-in speakerphone and can accept optional IP adapters (PSA, ADA2). You can also assign 110-Button DSS Consoles to these phones, but they must be on site (not networked).
Page 60 With Soft Phone software 1.0.3.0 or higher and Aspire system software 4.93 or higher, a USB cam- era can be connected to the Aspire Soft Phone PCs, allowing a user to make a phone call to another user registered on the same system and provide a video transmission for the call (as long as both users have a USB camera connected and the Aspire Soft Phone application installed with a serial key providing the video function).
Page 61 IP terminal device. This provides an addi- tional way to power the NEC IP terminals (Aspire IPhone or Aspire Keyset with IP Adapter). With this adapter, the IP terminals on the Aspire can be powered using: ●...
Page 62 Section 2: Components - For Your Notes - Product Description...
Page 63: Section 3: Features
Section 3: Features Section 3: Features Abbreviated Dialing Aspire S Aspire M/L/XL • Available. • Available. • 2000 bins available (0000-1999) for Common and • 2000 bins available (0000-1999) for Common and Group Abbreviated Dialing. Up to 8 Abbreviated Dial- Group Abbreviated Dialing.
Page 64: Account Codes
Abbreviated Dialing bin number. When the extension user presses the key, the phone automatically dials out the stored number. This provides true one-touch calling via a phone’s func- tion keys. Account Codes Aspire S Aspire M/L/XL • Available.
Page 65 Section 3: Features If Þrst digit is not 1 If Þrst digit is 1 Number of Digits Dialed Not allowed Not allowed Allowed - does not require Allowed - requires Account Account Code Code Allowed - requires Account Allowed - requires Account More than 7 Code Code...
Page 66: Alarm
If a user enters *12345*203 926 5400*67890*, if the Last Number Redial feature is used, the sys- tem dials the number as 203 926 5400*67890*. The *67890* is not treated as an Account Code. Alarm Aspire S Aspire M/L/XL •...
Page 67: Analog Communications Interface (Aci)
External Paging equipment, the ACI port provides External Paging independent of the Aspire NTCPU external paging input (the Aspire S CPU does not provide an external paging input). To use the External Paging, an extension user just dials the ACI analog port extension number and makes the announcement.
Page 68 Section 3: Features ● Auxiliary Device Control The PGDAD module can control a customer-provided tape recorder. When an extension user dials the ACI analog port extension number, they can automatically start the recorder and acti- vate the record function. When the user hangs up, the recording stops and the tape recorder turns off.
Page 69: Aspire Wireless
The Aspire system provides the ability to use 2.4 GHz Aspire Wireless/DECT (Digital Enhanced Cordless Telecommunication) phones. These phones provide you with the freedom and conve- niences of a wireless phone, but in addition, you also have access to features provided by the Aspire system.
Page 70 Aspire Wireless phone(s) from being registered in the system again. Programs Available for Gain Adjustment With software 2.63 or higher, you can adjust the gain of the Aspire Wireless handsets using Pro- gram 15-15-07 and 15-15-08. Register/Unregister Handset by Service Code The Aspire Wireless telephones can be registered or unregistered at a display keyset using a service code.
Page 71 VRS is left, the envelope icon will be shown in the LCD display. EXT 310 If the Aspire Wireless is out of range or if the phone is turned off, the message indication will be delayed until the phone returns into range or is powered up.
Page 72: Attendant Call Queuing
Section 3: Features Attendant Call Queuing Aspire S Aspire M/L/XL • Available. • Available. Description Attendant extensions can have up to 32 incoming calls queued before additional callers hear busy tone. This helps minimize call congestion in systems that use the attendant as the overßow destina- tion for unanswered calls.
Page 73 Section 3: Features Description Automatic Call Distribution (ACD) uniformly distributes calls among member agents of a pro- grammed ACD Group. When a call rings into an ACD Group, the system automatically routes the call to the agent that has been idle the longest. Automatic Call Distribution is much more sophisti- cated and comprehensive than Department Calling and other group services - it can accurately judge the work load at each agent and distribute calls accordingly.
Page 74 However, with software 4.0E and higher, AIC log on/log off operations are supported. The Aspire P Commands will indicate which ACD Group is being logged onto when an AIC code is entered. Also when an agent logs off, there will be a multiple log of events, one log off event for each previous ACD log on event.
Page 75 Section 3: Features ● Enhanced DSS Operation A programmed extension user can use their DSS Console to monitor the status of the ACD Agents within a group. The DSS Console is an essential tool for supervisors. The console key ßash rates tell the supervisor at a glance which of the group’s agents are: - Logged onto the group (i.e., in service) - Logged out of the group (i.e., out of service) - Busy on a call...
Page 76 Section 3: Features ● Supervisor, ACD Group You can designate an extension in an ACD Group to be the group’s supervisor. Once assigned as an ACD Group Supervisor, the user can: - Take the entire ACD Group out of service. - Check the log out status of each agent after the group taken down.
Page 77 Section 3: Features Hotline gives a keyset user one-button calling and Transfer to another extension (the Hot- line partner). Hotline helps co-workers that work closely together. The Hotline partners can call or Transfer calls to each other just by pressing a single key. Enhanced for ACD applications, Hotline provides a unique Busy Lamp Field for ACD agents as well as a BLF for co-workers that are not ACD agents.
Page 78 This feature is not yet supported by the inDepth software. Previously, the Aspire P Commands would not support AIC log on/ log off. Because of this, it was not possible for the inDepth MIS software to determine which ACD groups each extension was a member of or to which ACD groups calls were presented.
Page 79: Automatic Route Selection
The ARS feature can add or delete digits and route calls according to pre-determined levels. When Aspire systems are networked together by a tie line, the networked systems can be called by a sys- tem number and a user’s extension number, just an extension number, or by using a trunk access code.
Page 80: Background Music
This option would apply to both PRI and BRI ISDN trunks. If the trunk in the used in Program 26- 02 : Dial Analysis Table for ARS/LCR is not an ISDN trunk, this code in the dial treatment will be ignored. Background Music Aspire S Aspire M/L/XL • Available.
Page 81: Barge In
Section 3: Features Barge In Aspire S Aspire M/L/XL • Available. • Available. Description Barge In permits an extension user to break into another extension user’s established call, including Conference calls. This sets up a Conference-type conversation between the intruding extension and the parties on the initial call.
Page 82: Call Forwarding
Section 3: Features Call Forwarding Aspire S Aspire M/L/XL • Available. • Available. • Activating Call Forwarding while on a call available • Activating Call Forwarding while on a call available with 2.63+ software. with 2.63+ software. Description Call Forwarding permits an extension user to redirect their calls to another extension. Call For- warding ensures that the user’s calls are covered when they are away from their work area.
Page 83: Call Forwarding, Fixed
Section 3: Features Call Forwarding, Fixed Aspire S Aspire M/L/XL • Available. • Available. Description Fixed Call Forwarding is a type of forwarding that is permanently in force at an extension. Calls to an extension with Fixed Call Forwarding enabled automatically reroute - without any user action.
Page 84: Call Forwarding, Off-Premise
The receiving extension’s display shows: STA AAA AAA is the extension that initially placed the call. TRANSFER<< STA BBB BBB is the Þrst extension in the Fixed Call Forwarding chain. Call Forwarding, Off-Premise Aspire S Aspire M/L/XL • Available. • Available.
Page 85: Call Forwarding With Follow Me
The forwarding destination can be stored in an Abbreviated Dial bin. This feature can be used for trunks which are deÞned as normal (0) or DID (3) in Program 22-02 : Incoming Call Trunk Setup. Call Forwarding with Follow Me Aspire S Aspire M/L/XL •...
Page 86: Call Redirect
Section 3: Features Call Redirect Aspire S Aspire M/L/XL • Available. • Available. Description Call Redirect allows a keyset user to transfer a call to a pre-deÞned destination (such as an operator, voice mail, or another extension) without answering the call. This can be useful if you are on a call and another rings in to your extension.
Page 87: Callback
Section 3: Features Callback Aspire S Aspire M/L/XL • Available. • Available. Description When an extension user calls a co-worker that doesn’t answer, they can leave a Callback request for a return call. The user does not have to repeatedly call the unanswered extension back, hoping to Þnd it idle.
Page 88: Caller Id
Progress Tone Detection). The DSPDB provides an additional resources. additional 32 resources. • Caller ID information is not available for Aspire Wire- • Caller ID information available for Aspire Wireless with less (Aspire Wireless is not supported on Aspire S).
Page 89 “NO CALLER INFO”. Calling Party Number Information When using the Aspire Wireless telephone, the system can provide the Caller ID information for an external call if it is provided by the telco. Option to Enable Caller ID Name for SLT System programming provides an option for single line telephones to display Caller ID.
Page 90 Aspire Wireless Dials: 123456#*123456789012 Caller ID Sender Queuing Added The Aspire system can provide Caller ID (calling party number) to a single line telephone which has a display. With older software, if all Caller ID sender resources were busy in the system, the call would ring the SLT without any Caller ID information displayed.
Page 91: Center Telephone Book
The system allows multiple extensions to be assigned the same telephone book - this allows users to share commonly used numbers. ● With the Aspire S, up to 50 numbers/names can be stored; with the Aspire M/L/XL, up to 100 numbers/names can be stored. ●...
Page 92: Central Office Calls, Answering
Section 3: Features Central OfÞce Calls, Answering Aspire S Aspire M/L/XL • Available - 8 trunks. • Available - 200 trunks. • Additional trunk ring tones available. • Additional trunk ring tones added with software 1.02+. • DeÞning CODEC Filter settings available.
Page 93 When Program 81-07-01 : CODEC Filter Setup for Analog Trunk Ports is set to "4 - SpeciÞed Data", the system will use the settings in Program 81-09 : COIU CODEC Filter Data Setup. These values should not be changed from their default settings unless directed by NEC’S Technical Service department.
Page 94: Central Office Calls, Placing
When Program 81-07-01 : CODEC Filter Setup for Analog Trunk Ports is set to "4 - SpeciÞed Data", the system will use the settings in Program 81-09 : COIU CODEC Filter Data Setup. These values should not be changed from their default settings unless directed by NEC’S Technical Service department.
Page 95: Class Of Service
• Available - 15 Classes of Service. • Available - 15 Classes of Service. • Aspire Wireless registration by service code option not • Aspire Wireless registration by service code option available (Pgm 20-07-21). available with 2.63+ software (Pgm 20-07-21).
Page 96 SMDR printout accumulated STG data Station Message Detail Recording Disabled Enabled SMDR printout accumulated account code data Station Message Detail Recording Disabled Enabled Aspire Wireless Registration by Service Code Aspire Wireless Disabled Disabled Set/Cancel Private Call Refuse Caller ID Disabled Disabled...
Page 97 Section 3: Features Class of Service Options (Outgoing Call Service), Program 20-08 Default This option . . . Is used with . . . COS 01-14 COS 15 Display E911 Dialed Extension Name and E911 Compatibility Disabled Disabled Number ARS Override Map Automatic Route Selection Disabled Disabled...
Page 98 Section 3: Features Class of Service Options (Answer Service), Program 20-10 Automatic Answer of Universal Calls Universal Answer Disabled Disabled Auto Off-Hook Answer for Call Coverage Call Coverage Disabled Disabled Keys Class of Service Options (Answer Service), Program 20-11 Default This option .
Page 99 Section 3: Features Class of Service Options (Supplementary Service), Program 20-13 Default This option . . . Is used with . . . COS 01-14 COS 15 Long Conversation Alarm Warning Tone for Long Conversation Disabled Disabled Long Conversation Cutoff (Incoming) Warning Tone for Long Conversation Disabled Disabled...
Page 100 Section 3: Features Class of Service Options (Supplementary Service), Program 20-13 Default This option . . . Is used with . . . COS 01-14 COS 15 Transmission is cut when privacy release is Tandem Trunking Disabled Disabled used during trunk to trunk transfer. Group Listen Group Listen Enabled...
Page 101: Computer Telephony Integration (Cti) Applications
Disabled Disabled Direct Inward System Access (DISA) DISA/Tie Trunk Barge In Barge In Disabled Disabled Computer Telephony Integration (CTI) Applications Aspire S Aspire M/L/XL • Available. • Available. Description Computer Telephony Integration (CTI) applications automate your ofÞce with TAPI compatibility and external PC control.
Page 102: Conference
Section 3: Features Conference Aspire S Aspire M/L/XL • NTCPU provides 32 conference circuits, allowing each • NTCPU provides 2 blocks of 32 conference circuits, block to have any number conferences with any number allowing each block to have any number conferences...
Page 103: Conference, Voice Call/Privacy Release
● Drop a trunk or trunks from the Conference. While in a Conference, with older software, you could not drop one of the parties. Conference, Voice Call/Privacy Release Aspire S Aspire M/L/XL • NTCPU provides 32 conference circuits, allowing each •...
Page 104: Continued Dialing
For systems using the Privacy Mode Toggle option, trunks initially have the privacy released. If pri- vacy is desired for a trunk, use the toggle option or press the Privacy Release function key to switch modes. Continued Dialing Aspire S Aspire M/L/XL • Available.
Page 105: Cordless Ii/Cordless Lite Ii
The base unit provides a “Cordless” and “Desk” button which allows the one extension port to switch from the Cordless to an attached Aspire keyset. The phones must be in an idle state when the button is pressed, otherwise any active call will be disconnected.
Page 106 Section 3: Features Radio Interference Radio interference may occasionally cause buzzing and humming in your cordless handset or click- ing noises in the base unit. This interference is caused by external sources such as TV, ßuorescent lighting, or electrical storms. Your unit is not defective. If these noises continue and are too distract- ing, check around the ofÞce to see what appliances may be causing the problem, In addition, it is recommended that the base not be plugged into a circuit that also powers a major appliance because of the potential of interference.
Page 107: Department Calling
(Program 24-01-01). Intercom calls will still recall immediately if the Cordless II/Cordless Lite II user presses TALK after placing an internal call on hold. Department Calling Aspire S Aspire M/L/XL • Available - 8 Department Groups.
Page 108 Section 3: Features Overßow Routing Department Calling also provides overßow routing for extensions within the group. If a user directly dials a busy extension within a Department Group, the system can optionally route the call to the Þrst available group member. The system follows Program 22-15-03 and 22-15-05 timers for playing the periodic VRS message.
Page 109: Department Step Calling
Section 3: Features Department Step Calling Aspire S Aspire M/L/XL • Available. • Available. Description After calling a busy Department Calling Group member, an extension user can have Department Step Calling quickly call another member in the group. The caller does not have to hang up and place another Intercom call if the Þrst extension called is unavailable.
Page 110: Dial Tone Detection
Section 3: Features Dial Tone Detection Aspire S Aspire M/L/XL • Available • Available. • Tone Detection Setup is available. • Tone Detection Setup is available. • The Next Trunk in Rotary if No Dial Tone option is • The Next Trunk in Rotary if No Dial Tone option is available.
Page 111: Direct Inward Dialing (Did)
756 to extension numbers 301-556. The Aspire system has 2000 DID Translation Table entries that you can allocate among the 20 DID Translation Tables. There is one translation made in each entry. For a simple installation, you can put all 2000 entries in the same table.
Page 112 Section 3: Features DID Camp-On DID Camp-On sets what happens to DID calls to busy extensions when you have Busy Intercept disabled. With DID Camp-On enabled, a call to a busy extension camps-on for the DID Ring No Answer Time interval. It then diverts to the programmed DID Intercept extension ring group or Voice Mail.
Page 113 Section 3: Features Delayed DID Delayed DID allows a user a pre-programmed amount of time to answer a call. If the call is not answered within this time period, the system automatically answers the call. An outside party will hear a voice message, music, or dial tone according to the following conditions: ●...
Page 114 Section 3: Features Call by Time Schedule Feature Added For every DID number programmed, the DID Call by Time Schedule feature allows each of the 8 different time patterns (deÞned in Program 22-17) to be assigned a different destination, following the DID conversation table in Program 22-11.
Page 115: Direct Inward Line (Dil)
Available - 8 trunks and 8 Department Groups. • Available. With software prior to 2.50 - 26 extensions and 24 vir- Aspire M/L: 200 trunks, 64 Department Groups, 256 tual extensions. With 2.50+, 50 extensions and 24 virtual extensions, and 256 virtual extensions. extensions.
Page 116 Section 3: Features DISA calls ring system extensions like other outside calls. If an extension has a line key for the DISA trunk, the call rings that key. If the extension does not have a line key, the call rings an idle CALL key.
Page 117 Disconnect service code, the call will be disconnected immediately. Remote Feature Setup with DTMF An option may be available which can be used to remotely set various Aspire functions for the speciÞed extension by dialing the extension number and service code using a DISA line. This option is available for keysets, single line telephones, and IP telephones.
Page 118: Direct Station Selection (Dss) Console
1 when the console user presses the key. The maximum number of 110-Button DSS Consoles allowed per system is 4 (Aspire S) or 32 (Aspire). Up to 24 (Aspire S) or 256 (Aspire) 24-Button DSS Consoles are possible. Each exten- sion can have up to 4 110-Button DSS Consoles and/or only one 24-button DLS console.
Page 119: Directed Call Pickup
DSS and Hotline keys on keysets as well as DSS Consoles. ACD/Non-ACD Agent DSS Lamping Available With the Aspire M/L/XL system and software 4.0E+, a new option is available in Program 30-05- 01 which allows a non-ACD DSS console to lamp indicating the status of both non-ACD agents as well as ACD agents.
Page 120: Directory Dialing
Section 3: Features Directory Dialing Aspire S Aspire M/L/XL • Available. • Available. Description Directory Dialing allows a display or Super Display keyset user to select a co-worker or outside call from a list of names, rather than dialing the phone number. There are four types of Directory Dialing: ●...
Page 121: Do Not Disturb
Section 3: Features Do Not Disturb Aspire S Aspire M/L/XL • Available. • Available. • Class of Service option for allowing DND requires soft- • Class of Service option for allowing DND requires soft- ware 2.63+. ware 2.63+. • DND activation while on a call is possible with 2.63+ •...
Page 122: Dual Line Appearance
Section 3: Features Dual Line Appearance Aspire S Aspire M/L/XL • Available. • Available. Description Each keyset has two line appearance keys (CALL1 and CALL2) for placing and answering calls. These line appearance keys, assigned to the extension’s number, simplify operations for busy users.
Page 123 Section 3: Features E911 Compatibility uses the ßexibility of the Automatic Route Selection Call Route Options to route 911 emergency calls (even in systems in which ARS is not enabled). ● E911 Outgoing Dialing The E911 calls follow the trunk group route programming. It is possible to use the ßexibil- ity of the Automatic Route Selection Call Route Options for additional routing options.
Page 124: External Alarm Sensors
Section 3: Features External Alarm Sensors Aspire S Aspire M/L/XL • This is a future item and is not currently available. • This is a future item and is not currently available. This is a future item and is not currently available.
Page 125: Forced Trunk Disconnect
Section 3: Features Forced Trunk Disconnect Aspire S Aspire M/L/XL • Available. • Available. Description Forced Trunk Disconnect allows an extension user to disconnect (release) another extension’s active outside call. The user can then place a call on the released trunk. Forced Trunk Disconnect lets a user access a busy trunk in an emergency, when no other trunks are available.
Page 126: Group Listen
Section 3: Features Group Listen Aspire S Aspire M/L/XL • Available. • Available. Description Group Listen permits a keyset user to talk on the handset and have their caller’s voice broadcast over the telephone speaker. This lets the keyset user’s co-workers listen to the conversation. Group Listen turns off the keyset’s Handsfree microphone so the caller does not pick the coworker’s...
Page 127: Handsfree Answerback/Forced Intercom Ringing
Section 3: Features Handsfree Answerback/Forced Intercom Ringing Aspire S Aspire M/L/XL • Available. • Available. Description Handsfree Answerback permits an extension user to respond to a voice-announced Intercom call by speaking toward the phone, without lifting the handset. Like Handsfree, this is a convenience for workers who don’t have a free hand to pick up the handset.
Page 128: Hold
Section 3: Features Hold Aspire S Aspire M/L/XL • Available. • Available. Description Hold lets an extension user put a call in a temporary waiting state. The caller on Hold hears silence or Music on Hold, not conversation in the extension user’s work area. While the call waits on Hold, the extension user may process calls or use a system feature.
Page 129: Hotline
Section 3: Features Hotline Aspire S Aspire M/L/XL • Available - 512 Internal Hotline extensions. • Available - 512 Internal Hotline extensions. • DSS Lamping (Program 30-05-01) applied to keysets • DSS Lamping (Program 30-05-01) applied to keysets with 4.0E+ for DSS and Hotline keys.
Page 130: I-Series Telephones
Available with software 1.06+. Description Each 16DSTU PCB provides the Aspire system the ability to connect up to 16 i-Series telephones with each port supporting 1 B-channel. The system allows up to 15 DSTU PCBs (limited by load factor) to be installed, allowing up to 240 i-Series telephones to be connected. Each phone having a load factor of “3”.
Page 131 Section 3: Features When using i-Series phones on the Aspire system, the following features are NOT supported: ● Directory Dial ● Super Display Operation ● Soft Keys ● Headset Key ● Changing Incoming CO and ICM Ring Tones (Program 11-11-20) ●...
Page 132: Indepth Lite, Indepth And Indepth
The inDepth and inDepth+ programs are Windows-based Management Information Systems that work in conjunction with the built in Aspire ACD. These ACD/MIS systems enhance the system ACD with real time statistics and reports on ACD group trafÞc patterns and usage. The inDepth and inDepth+ applications have an extensive set of user-conÞgurable Real Time Windows and Reporter...
Page 133: Intercom
Section 3: Features Intercom Aspire S Aspire M/L/XL • Available. • Available. Description Intercom gives extension users access to other extensions. This provides the system with complete internal calling capability. Handsfree Answerback/Forced Intercom Ringing Handsfree Answerback permits an extension user to respond to a voice-announced Intercom call by speaking toward the phone, without lifting the handset.
Page 134: Isdn Compatibility
!! Important !! ISDN is an emerging technology on the leading edge of international digital communication’s net- working. Always check with your NEC’s Technical Service Representative before setting up your ISDN application. Working together will ensure maximum compatibility and reliable ISDN performance.
Page 135 Section 3: Features Calling Party Number NotiÞcation The system can provide calling party number notiÞcation for outgoing ISDN calls. When a call is made on an ISDN line by an extension, the system will send the identiÞcation for the extension placing the call, if it’s programmed.
Page 136 U.S. (comparable to an analog centrex). This service supports trunk-to-trunk transfer on the telco side. With this option enabled, two trunk calls on the Aspire system can be connected together by the telco, releasing the trunks from the Aspire and connecting the outside parties together.
Page 137 The regular Tandem Trunking programming must also be set to enable this feature. ● This feature does not support S-Bus. ● When used with Aspire Networking, this feature will work only when the two trunks are in the same system. Product Description...
Page 138 S-Bus (allows BRI PCB's to be used as either a trunk or station interface) BRI services require the installation of BRI Interface PCBs (2BRIU P/N 0891050 (Aspire S) or 0891006 (Aspire), 4BRIU P/N 0891007, 8BRIU, P/N 0891008). Each 2BRI Interface PCB has two BRI circuits.
Page 139: Last Number Redial
Phones Operation Different from Aspire Phones When an i-Series telephone is connected to the Aspire system, the Last Number Redial operation is slightly different. When pressing the LND key, the display indicates "REDIAL [#] / ABB". The user can then press # to redial the number displayed, or enter an Abbreviated Dialing bin number to be dialed.
Page 140: Line Preference
Section 3: Features Line Preference Aspire S Aspire M/L/XL • Available. • Available. Description Line Preference determines how a keyset user places and answers calls. There are two types of Line Preference: Incoming Line Preference and Outgoing Line Preference. Incoming Line Preference Incoming Line Preference establishes how a keyset user answers calls.
Page 141: Long Conversation Cutoff
Section 3: Features Long Conversation Cutoff Aspire S Aspire M/L/XL • Available. • Available. Description For incoming and outgoing central ofÞce calls, each trunk can be programmed to disconnect after a deÞned length of time. The timer begins when the trunk is seized and disconnects the call after the timer expires.
Page 142: Maintenance
The Aspire system provides several features to help maintain the Aspire database, for backup, and system analysis. Database Maintenance In addition to the keyset programming, the Aspire system provides the ability to use a PC to access system programming. The Windows-based PCPro and the HTML-based WebPro allows you to: ●...
Page 143 Section 3: Features In addition, PCPro allows you to: ● Save your programming to your PC’s hard disk - then upload it via a LAN (Local Area Net- work), PPP, serial or USB connection. PPP is a protocol that allows a computer to use a regular telephone line and a serial interface (modem) to make TCP/IP connections.
Page 144 Section 3: Features Keep the following items in mind when using the Extension Data Swap function: ● Any user-deÞned programming stored in the SRAM will not be swapped (for example, Call Forward set up, Selectable Display Messaging, etc.). ● The extensions to be swapped must be idle while the swap is performed, or an "Invalid" error message will be received.
Page 145 Section 3: Features 20-06 Class of Service for Extension 21-02 Trunk Group Routing for Extensions 21-04 Toll Restriction Class for Extensions 21-07 Toll Restriction Override Password Setup 21-10 Dial Block Restriction Class Per Extensions 21-11 Hotline Assignment 21-13 ISDN Calling Party Number Setup for Extensions 21-15 Individual Trunk Group Routing for Extensions 21-18...
Page 146 Section 3: Features ● Using this option will also swap the order in which these extensions are displayed in all exten- sion-related programs . This means that the system will no longer display all the extension numbers from low to high. For example, if port 2 and 6 were swapped, when viewing the extensions in 15-02-01, the extensions will display in the following order: 301, 306, 303, 304, 305, 302.
Page 147 Section 3: Features Fill and Delete Extension Data Functions Added The software provides the ability to Þll program entries for a range of extensions to the same as a designated source extension. In addition, program data can be deleted for a range of ports. The Fill and Delete programs can be used only with the following programs: Program Program Name...
Page 148: Meet Me Conference
After uploading the programming, reset the system and wait a few minutes for the system to reset completely before accessing any lines or special system features. Otherwise, some unusual LED indications may be experienced. Meet Me Conference Aspire S Aspire M/L/XL • NTCPU provides 32 conference circuits, allowing any •...
Page 149: Meet Me Paging Transfer
Section 3: Features Meet Me Paging Transfer Aspire S Aspire M/L/XL • Available. • Available. Description If a user wants to Transfer a call to a co-worker but they don’t know where the co-worker is, they can use Meet Me Paging Transfer. With Meet Me Paging Transfer, the user can Page the co-worker and have the call automatically Transfer when the co-worker answers the Page.
Page 150: Message Waiting
Section 3: Features Message Waiting Aspire S Aspire M/L/XL • Available. • Available. • The MSG key as Voice Mail key feature is available. • The MSG key as Voice Mail key feature is available with 1.11+ software. • LED Color Indication option requires software 2.63+.
Page 151: Microphone Cutoff
Basic Data Setup - MW Signal Type is used to determine whether the SLT user will see a MW LED indication or if the Caller ID will be used to display the call. Microphone Cutoff Aspire S Aspire M/L/XL •...
Page 152 Section 3: Features The Call Coverage keys follow the extension’s Do Not Disturb and Off-Hook Signaling program- ming. These keys do not, however, indicate the lamping for extensions in DND. If this is required, a Hotline key can be used instead. Place and Receive Calls on Call Coverage/Multiple Directory Number Keys Multiple Directory Number keys/Call Coverage keys can be used three separate ways, depending on how the key is deÞned in Program 15-02-21.
Page 153: Music On Hold
Composers, Authors and Publishers (ASCAP) or other similar organizations, if radio, television broadcasts or music other than material not in the public domain are transmitted through the Music on Hold feature of telecommunications systems. NEC America hereby disclaims any lia- bility arising out of the failure to obtain such a license.
Page 154: Networking
(such as Name Storing for an extension, service code 800). When in system programming, the right arrow soft key must be used to advance the cursor. Networking Aspire S Aspire M/L/XL • Networking with VoIP or BRI available. PRI Network- •...
Page 155 When an Aspire system is connected via a VoIP connection to an i-Series system in a tie-line type setup, in order to transfer calls from the Aspire system to the i-Series, in addition to the VoIP programs speciÞed in the VoIP feature (page 201), set up the Flexible Routing Tables as follows: ●...
Page 156 IP Networking allows for a maximum of 50 nodes. With ISDN Networking, the maximum number of nodes depends on the type of trunks used - PRI, BRI or a mixture of both. As the Aspire M/L/XL is limited to 8 PRI PCBs, when PRI trunks are used, the limit would be 8 systems, but each system would require 8 PRI PCBs.
Page 157 IP resources are busy. ISDN Networking Clock Source When using ISDN Networking (PRI or BRI) on the Aspire system, the option selected in Program 10-03-01 : PCB Setup - ISDN Line Mode determines the clock source for the networked connec- tion.
Page 158: Night Service
Section 3: Features Fax Over Networking The purpose of Aspire Networking is to be able to connect several systems and have them appear to operate as one system. However, some restrictions still apply. With older software, with Fax Over Networking using H.323 trunks, if a resource was busy, the operation could not be performed efÞ- ciently.
Page 159: Off Hook Signaling
You can determine in programming how many modes through which the user will toggle. Note that the additional data for the Programmable Function Key must be set to "0" for the toggle function to work. Off Hook Signaling Aspire S Aspire M/L/XL • Available.
Page 160: One-Touch Calling
If the extension has Block Camp On disabled, callers are not prevented from dialing 2 to Camp on after hearing busy or busy/ring. This is set in the called extension’s Class of Service. One-Touch Calling Aspire S Aspire M/L/XL • Available.
Page 161: Operator
Key. This is helpful for One-Touch Keys used as Personal Speed Dial bins. The stored Flash may be helpful to access features of the connected telco, PBX or Centrex. Operator Aspire S Aspire M/L/XL • Available - up to 8 operators.
Page 162: Paging, External
The Aspire S system allows up to eight External Paging zones. The Aspire system allows up to nine External Paging zones, with the additional zone (#9) provided on the NTCPU. All other zones (#1- 8) requires a port on a 2PGDAD module, with a maximum of two external paging circuits per mod- ule.
Page 163: Paging, Internal
Section 3: Features Paging, Internal Aspire S Aspire M/L/XL • Available - 8 Internal Paging Groups (Zones). • Available - 64 Internal Paging Groups (Zones). Description Internal Paging lets extension users broadcast announcements to other keyset users. When a user makes a Zone Paging announcement, the announcement broadcasts to all idle extensions in the zone dialed.
Page 164: Park
After parking a call in orbit, a user can Page the person receiving the call and hang up. The paged party dials a code or presses a programmed Park key to pick up the call. With Park, it is not nec- essary to locate a person to handle their calls.
Page 165: Pbx Compatibility
Receiving a Personal Park Recall Available Not Available Available PBX Compatibility Aspire S Aspire M/L/XL • Available. • Available. Description You can connect your phone system trunks to Centrex/PBX lines, rather than to telco trunk circuits.
Page 166: Prime Line Selection
Section 3: Features Prime Line Selection Aspire S Aspire M/L/XL • Available. • Available. Description Prime Line Selection allows a keyset user to place or answer a call over a speciÞc trunk by just lift- ing the handset. The user does not have to Þrst press keys or dial codes. This simpliÞes handling calls on a frequently used trunk.
Page 167: Private Line
Section 3: Features Private Line Aspire S Aspire M/L/XL • Available. • Available. Description A Private Line is a trunk reserved for a keyset for placing and answering calls. A user with a Pri- vate Line always knows when important calls are for them. Additionally, the user has their own trunk for placing calls that is not available to others in the system.
Page 168: Pulse To Tone Conversion
Section 3: Features Pulse to Tone Conversion Aspire S Aspire M/L/XL • Available. • Available. Description An extension can use Pulse to Tone Conversion on trunk calls. Pulse to Tone Conversion lets a user change their extension’s dialing mode while placing a call. For systems in a Dial Pulse area, this permits users to access dial-up OCCs (such as MCI) from their DP area.
Page 169: Reverse Voice Over
Section 3: Features Reverse Voice Over Aspire S Aspire M/L/XL • Available. • Available. Description While on a handset call, Reverse Voice Over lets a busy keyset user make a private Intercom call to an idle co-worker. The idle co-worker can be at a keyset or 500/2500 set. The busy user just presses and holds down a programmed Reverse Voice Over key to make a private call to a speciÞed co-worker.
Page 170: Ring Tones, Selectable
Section 3: Features Any number of extensions and trunks can be in a speciÞc group. The Aspire S system allows Ring Groups=1-8, In-Skin Voice Mail (102), or Centralized Voice Mail (103). The Aspire system allows Ring Groups=1-100, In-Skin Voice Mail (102), or Centralized Voice Mail (103).
Page 171: Room Monitor
Section 3: Features Room Monitor Aspire S Aspire M/L/XL • Available. • Available. Description Room Monitor lets an extension user listen to the sounds in a co-workers area. For example, the receptionist could listen for sounds in the warehouse when it’s left unattended. To use Room Moni- tor, the initiating extension and the receiving extension must activate it.
Page 172: Save Number Dialed
Section 3: Features Save Number Dialed Aspire S Aspire M/L/XL • Available. • Available. Description Save Number Dialed permits an extension user to save their last outside number and easily redial it later on. For example, an extension user can recall a busy or unanswered number without manually dialing the digits.
Page 173: Secretary Call Pickup
Section 3: Features Secretary Call Pickup Aspire S Aspire M/L/XL • Available. • Available. Description Secretary Call Pickup lets a keyset user easily reroute calls intended for a co-worker to themselves. By pressing a Secretary Call Pickup key, the user can have all calls to a co-worker’s phone ring or voice- announce theirs instead.
Page 174: Selectable Ring Tones
10 digits (where reached) GONE FOR THE DAY ON VACATION UNTIL ##/## Date (when returning) 11-20 MESSAGE 11-20 Selectable Ring Tones Aspire S Aspire M/L/XL • Available. • Available. Description An extension user can change the way trunks or ICM calls ring their phone. Selectable Ring Tones allows an extension user to set up unique ringing for their calls.
Page 175: Single Line Telephones, Analog 500/2500 Sets
When Program 82-07-01 : CODEC Filter Setup for Analog Station Ports is set to "4 - SpeciÞed Data", the system will use the settings in Program 82-09 : SLIU CODEC Filter Data Setup. These values should not be changed from their default settings unless directed by NEC’S Technical Service department.
Page 176: Single Line Telephones, Digital
Aspire M/L/XL • Available - 24 single line telephones maximum. • Available - Aspire M/L: 256 single line telephones maximum (may be restricted due to system power requirements). Aspire XL: 384 single line telephones maximum - requires software 4.0E+. Description The digital single line telephone (DSL) can be installed as On-Premise or Off-Premise extensions.
Page 177: Station Message Detail Recording
- ws1.necii.com). be done from within that program.) • The LAN port on the Aspire NTCPU can be used with 1.02+. (The LAN port only provides information through LAN-capable programs, such as HyperTermi- nal. Printing of the SMDR information must be done from within that program.)
Page 178 SMDR output options. For example, you can output the SMDR report to a high speed printer or send it to disk through a PC’s serial or USB port (requires the USB driver which can be downloaded from the NEC Technical Support web site - ws1.necii.com). ●...
Page 179: Station Park
Please refer to Park (page 156) for information on this feature. Station Relocation Please refer to Maintenance (page 134) (Extension Data Swap) for information on this feature. T1 Trunking (with ANI/DNIS Compatibility) Aspire S Aspire M/L/XL • Not Available. •...
Page 180: Tandem Ringing
- incoming calls, however, will ring the available phone. The keyset must be paired with either an analog single line telephone or Aspire Wireless extension. It cannot be paired with another keyset or IP phone.
Page 181: Tandem Trunking (Unsupervised Conference)
Section 3: Features Tandem Trunking (Unsupervised Conference) Aspire S Aspire M/L/XL • NTCPU provides 32 conference circuits, allowing each • NTCPU provides 2 blocks of 32 conference circuits, block to have any number conferences with any number allowing each block to have any number conferences...
Page 182 Section 3: Features ● Method C - Automatic Tandem Trunking on Hang Up This method allows an extension user to easily set up an Unsupervised Conference without having to place the conference call on Hold. A Class of Service option is available, depending on your software version, which will allow or deny an extension user from automatically set- ting up a Conference/Tandem Trunking call upon hanging up the phone.
Page 183: Tapi Compatibility
In addition to a compatible system software version, you must also have: ● Aspire keyset telephone containing an RS-232-C CTA Adapter (P/N 0890058) / CTU Adapter (P/N 0890059) with TAPI compliant Þrmware. ● PC Driver for the CTA: PC running Windows 98 Second Edition or higher ●...
Page 184: Tie Lines
1) type tie line circuits. Using switches on the PCB, each circuit type can be set as Type I, II, III, IV, or V. Refer to the Aspire M/L/XL Hardware Manual for the PCB switch settings. Tie Line Class of Service Tie Line Class of Service provides features and dialing restrictions for incoming tie lines.
Page 185 Section 3: Features ● Common Abbreviated Dialing The remote system’s Common Abbreviated Dialing bins may be available to tie line callers. Use this capability to set up centralized Abbreviated Dialing control - or just save time when dialing. ● Operator Calling A tie line caller may be able to dial 0 for the remote system’s operator.
Page 186: Time And Date
Section 3: Features Time and Date Aspire S Aspire M/L/XL • Available. • Available. • Clock Adjustment program available with software • Clock Adjustment program available with software 2.62+. 2.62+. Description The system uses Time and Date for: • Central OfÞce Calls (Access Maps) •...
Page 187 Section 3: Features Description Toll Restriction limits the numbers an extension user may dial. By allowing extensions to place only certain types of calls, you can better control long distance costs. The system applies Toll Restriction according to an extension’s Toll Restriction Class. The system allows for up to 15 Toll Restriction Classes.
Page 188 Section 3: Features ● Call Digit Counting Use Call Digit Counting to limit the number of digits local callers can dial. You can use this option to prevent users from accessing local dial-up services. For example, set the Maximum Number of Digits in Local Calls to 7 to limit local callers to dialing the exchange code (NNX) and local address (nnnn) only.
Page 189: Toll Restriction, Dial Block
Section 3: Features Toll Restriction, Dial Block Aspire S Aspire M/L/XL • Available. • Available. Description Toll Restriction Dial Block lets a user temporarily block an extension’s Toll Restriction. This helps a user block his or her phone from being used by another person while they are away from their desk.
Page 190: Traffic Reports
• Available. Description The system provides the ability to send data to a PC connected to the Aspire. The telephone call trafÞc data for each extension is captured for use with the SMDR feature. Call TrafÞc The total of outgoing call frequency, outgoing call duration, call charge, incoming call frequency, answer frequency, incoming call duration, ringing duration for each line and extension, and abandon call frequency for each line is logged.
Page 191 Section 3: Features The system allows the following types of transfers: ● Screened Transfer The transferring user announces the call to the destination before hanging up ● Unscreened Transfer The transferring party extends the call without an announcement. ● Extension (Department) Groups Transfer The Transferring party sends the call to a Department instead of an extension.
Page 192: Trunk Group Routing
Step Transfer for Automatic Trunk-to-Trunk Transfer Feature Added The Aspire enhances the Automatic Trunk-to-Trunk Transfer feature. If the destination to which a trunk has been transferred receives no answer (following the timer set in Program 24-02-12), the system can then automatically Step Transfer the call to a new destination.
Page 193: Trunk Groups
Section 3: Features Trunk Groups Aspire S Aspire M/L/XL • Available - 8 trunk groups. • Available - 100 trunk groups. Description Trunk Groups let you optimize trunk usage for incoming and outgoing calls. With Trunk Groups, users can have loop (rotary) keys for trunk calls. Incoming trunk group calls ring these loop keys.
Page 194: Ultra Callanalyst
Section 3: Features Ultra CallAnalyst Ultra CallAnalyst is an easy to use, graphically oriented software package that allows you to moni- tor and analyze phone calls, understand phone usage and cut costs. CallAnalyst tracks both incom- ing and outgoing calls accurately as well as the date and time of each call. If you need to track the incoming phone call with name and/or telephone numbers, CallAnalyst requires Caller ID services from the local phone company.
Page 195: Universal Answer
Section 3: Features ● Available serial port and RS-232 cable (if required) ● Network Interface Card (NIC) ● Printer (if required to print reports) Software ● Windows NT 4.0 (workstation or server) w/SP6, 2000 Professional w/SP3, XP Professional w/ SP1 or 2003 Server ●...
Page 196: Voice Mail
4.94+. Description The system is fully compatible with NEC’s analog NVM-Series Voice Mail with Automated Atten- dant Systems. These systems provide telephone users with comprehensive Voice Mail and Auto- mated Attendant features. Voice Mail ends the frustration and cost of missed calls, inaccurate written messages and telephone tag.
Page 197 Section 3: Features ● Leaving a Message Voice Mail lets a keyset extension user easily leave a message at an extension that is unan- swered, busy or in Do Not Disturb. The caller just presses their Voice Mail key to leave a mes- sage in the called extension’s mailbox.
Page 198 Directed Call Pickup to intercept the call. Depending on how the subscriber wants Park and Page to operate, they can turn the Paging Message on or off. Refer to the Aspire Mail Sys- tem Guide (P/N 17710SWGxx) for details on setting this feature.
Page 199 Master Mailboxes = 16 (Only 8 of the 16 Master mail- boxes are accessible in Aspire S.) Total Mailboxes = 160 Programming Interface: Aspire S telephone programming or Aspire PCPro soft- ware 2.30 or higher. Remote Programming: Access Via HTML-based Aspire WebPro or using cus- tomer-provided modems with Aspire PCPro.
Page 200 Aspire M. Refer to the IntraMail System Guide (P/N 0893240) for complete details on set- ting up the IntraMail. The boot code for the Aspire system must be at the current level of 1.20 for IntraMail to function. Refer to the Boot Code Update Instructions, P/N 0893211 for details on updating. The current ver- sion number can be displayed with history enabled (DIMU) after rebooting the system.
Page 201 PVMU stops when IntraMail is used. (The PVMU is not available in the U.S.) IntraMail: Ability to Select Voice Mail Port Selected for Message NotiÞcation/MW Lamps The Aspire S can select an available voice mail port which can be used the Message NotiÞcation or MW Lamp update routines. IntraMail: External Transfer Available The software provides the ability for the IntraMail to perform an external transfer.
Page 202 IntraMail: Directory Dialing This feature requires the IntraMail Utility 1.2. The utility and the instruction sheet for updating the utility are available for downloading from the NEC Technical Support Site (ws1.necii.com). This site requires user registration (contact NEC Sales Support for details).
Page 203 4.94 or higher. When the Aspire Mail is used for Centralized Voice Mail (CVM), the phones on the networked sys- tem can also have their displays updated using the NSL protocol. This allows the users to press the Soft Keys associated with the display to proceed through the voice mail menus.
Page 204: Voice Over
Section 3: Features Voice Over Aspire S Aspire M/L/XL • Available. • Available. Description - Important - Do not use Voice Over to a user on speakerphone as the conversation may be heard by the outside party. Voice Over lets a user interrupt a keyset extension user busy on another call. With Voice Over, the busy keyset extension user hears an alert tone followed by the voice of the interrupting party.
Page 205: Voice Response System (Vrs)
Section 3: Features Voice Response System (VRS) Aspire S Aspire M/L/XL • Available - 8 Channels. • Available - 16 Channels. • VRS available with basic NTCPU requires software 2.00+. Description The DSP daughter board provides the option for Voice Response System (VRS) which gives the system voice recording and playback capability.
Page 206 Section 3: Features Personal Greeting Personal Greeting allows an extension user to record a message and forward their calls. Callers to the extension hear the recorded message and are then forwarded to the new destination. The Per- sonal Greeting and Park & Page options can have up to 200 messages total (note that the Park & Page feature uses 2 messages).
Page 207 Section 3: Features For example, John Smith could record a Personal Greeting that says: “Hello, this is John Smith. I am away from my phone right now but please hold on while I am auto- matically paged.” The prerecorded Paging announcement could say: “John Smith, you have a call waiting on your line.”...
Page 208 Section 3: Features VRS Waiting Message Using VRS Waiting Message, the system can automatically answer an incoming trunk call Þrst (either a normal trunk or one designated for a department group) to let the outside caller hear a recorded message when the call is not answered in a programmed period of time. With this feature, the call keeps ringing at the same destination until it is answered or until other programming, takes affect.
Page 209: Voip
(DTMF receivers, Caller ID receivers, or call progress tone detection). Refer to the Boot Code Update Instructions, P/N 0893211, for details on installing the updated boot code. VoIP Aspire S Aspire M/L/XL • Available - 16 IP extensions max.
Page 210 Using a LAN setup (local area network) with the Aspire system complies with the ethernet standard (10Base-T/100Base-TX). To connect a telephone to a LAN connection, the system allows the use of an Aspire digital IP 34- button keyset (referred to as Aspire IPhone), an Aspire digital keyset with an IP Adapter installed or an H.323 IP digital telephone.
Page 211 SIP trunks are used for making a simple IP networking like H.323 IP trunk inter-connection with Program 10-23. If a common carrier supports SIP, then the Aspire can connect the SIP Carrier and outgoing calls to the PSTN network and the common IP network using an Aspire SIP trunk.
Page 212: Volume Controls
Section 3: Features Conditions - SIP Trunking ● Aspire does not support a simultaneous using of a SIP trunk inter-connection and a SIP Trunk Carrier connection. ● Aspire supports a "100rel" option and "Session Timer" option. ● Aspire supports "Early Media".
Page 213: Warning Tone For Long Conversation
Section 3: Features FLASH CONF Volume Down Volume Up Handsfree, Handset, Page and BGM Volume Warning Tone For Long Conversation Aspire S Aspire M/L/XL • Available. • Available. Description The system can broadcast warning tones to a trunk caller warning them that they have been on the call too long.
Page 214 Section 3: Features - For Your Notes - Product Description...
Page 215: Section 4: Specifications And Parts List
Section 4: SpeciÞcations and Parts List Section 4: SpeciÞcations and Parts List System Number Plan/Capacities System Number Plan/Capacities System Type: Aspire S Aspire M/L Aspire XL System Analog Caller ID Detector Classes of Service Day/Night Mode Numbers Day/Night Service Patterns...
Page 216 Section 4: SpeciÞcations and Parts List System Number Plan/Capacities System Type: Aspire S Aspire M/L Aspire XL COIU: • Physical Ports 01-04 01-08 01-08 • Logical Ports 0-200 0-200 DIOPU: • Physical Ports 01-02 01-08 01-08 • Logical Ports LD Trunk: 0-8...
Page 217 (64 or 128 ports depending on the PAL EPROM and software installed). With the Enhanced NTCPU (P/N 0891038), if the number of VoIP and Aspire Wireless phones combined exceeds 256, the number of ports available for keysets or analog devices is then reduced by 1 for each additional IP or Aspire Wireless phone.
Page 218 Section 4: SpeciÞcations and Parts List System Number Plan/Capacities System Type: Aspire S Aspire M/L Aspire XL 2PGDAD Modules ADA (Recording Jack) Adapters Aspire Wireless Bases Aspire Wireless Phones Door Boxes Door Box Numbers DSS Consoles Numbers • 24-Button DLS Consoles, Maximum Installed •...
Page 219 Section 4: SpeciÞcations and Parts List System Number Plan/Capacities System Type: Aspire S Aspire M/L Aspire XL Data Communication Interfaces APR Software Port Numbers 193-256 193-256 193-512 With software 4.xx or With software 4.xx or higher: higher: 193-512 193-512 APA Adapters...
Page 220 Ports for External Voice Mail Though this is the maximum available in the NVM-Series voice mail, as each voice mail port requires an analog port, the total number is restricted by the Aspire S system to a maximum of 16.
Page 221 Section 4: SpeciÞcations and Parts List System Number Plan/Capacities System Type: Aspire S Aspire M/L Aspire XL Passwords User Password for setting Toll 0000 0000 0000 Restriction Override and Changing Class of Service using a service code Programming Passwords Level 1 (MF)
Page 222: Aspire S System Specifications
Section 4: SpeciÞcations and Parts List Aspire S System SpeciÞcations Aspire S System Capacities Cabinets Analog Trunks (CO/PBX lines) Digital Key Telephones * combined total to 26 Analog Single Line Telephones (includes extension ports IP Telephones 16 * provided on the CPU)
Page 223 Section 4: SpeciÞcations and Parts List Aspire S PCB Capacities CPU Central Processing Unit ENTU LAN CTI 8ESIU 8 Digital Stations 4SLIU 4 Analog Stations 4SLIDB 4 Analog Stations 0 - If 4 4SLIU PCBs installed Daughter Board (installs on 4SLIU)
Page 224: Aspire M/L System Specifications
Section 4: SpeciÞcations and Parts List Aspire M/L System SpeciÞcations Aspire M/L System Capacities NTCPU-A NTCPU-A with NTCPU-A with NTCPU-B Notes with Basic Feature Upgrade Feature Upgrade PAL Chip PAL Chip PAL Chip (Software (Software 1.00-3.07) 4.00+) Cabinets 2 (Main and 1...
Page 225: Aspire Xl System Specifications
Section 4: SpeciÞcations and Parts List Aspire XL System SpeciÞcations Aspire XL System Capacities (requires software 4.xx or higher) NTCPU-A NTCPU-A with NTCPU-B Notes with Basic Feature PAL Chip Upgrade PAL Chip Cabinets 2 (Main and 1 2 (Main and 1...
Page 226: Aspire M/L/Xl System Specifications
Section 4: SpeciÞcations and Parts List Aspire M/L/XL System SpeciÞcations Aspire M/L/XL System Capacities NTCPU-A with NTCPU-A with NTCPU-B Notes Basic PAL Chip Feature Upgrade PAL Chip (any version of software) 24-Button DLS Consoles 1 maximum per extension 110-Button DSS Consoles 4 maximum per extension.
Page 227 Section 4: SpeciÞcations and Parts List Aspire M/L/XL PCB Capacities NTCPU-A NTCPU-A NTCPU-A NTCPU-B with Basic with Feature with Feature PAL Chip Upgrade PAL Upgrade PAL Chip Chip (Software (Software 1.00-3.07) 4.00+) NTCPU Central Processing Unit EXIFU Expansion PCB DSPDB Resource/VRS Daughter...
Page 228 Section 4: SpeciÞcations and Parts List Aspire M/L/XL PCB Capacities NTCPU-A NTCPU-A NTCPU-A NTCPU-B with Basic with Feature with Feature PAL Chip Upgrade PAL Upgrade PAL Chip Chip (Software (Software 1.00-3.07) 4.00+) 4TLIU 4 E&M Tie Line Trunks 4DIOPU 4 DID/OPX Trunks...
Page 229 C (32 - 104 Humidity: 10-90% RH Door Box Temperature: -20 C - 60 C (-4 - 140 Humidity: 20-80% (non-condensing) Aspire S Power Supply Operating: Temperature: 0 C - 60 C (32 - 140 Humidity: 10-90% RH Storage: Temperature: -20...
Page 230 Section 4: SpeciÞcations and Parts List Aspire S Electrical SpeciÞcations Power Supply AC Power Supply Dedicated 15 Amp circuit Power Requirements: 120 VAC @ 15A KSU Power Consumption (max.): 65W Input Voltage: 85VAC to 138VAC Rated frequency: 50/60 Hz Input Frequency: 47 - 63 Hz Phase and Wire: Single, 2-Wire Grounding Requirements: No.
Page 231 Section 4: SpeciÞcations and Parts List Aspire M/L Electrical SpeciÞcations Power Supply AC Power Supply Dedicated 15 Amp circuit Power Requirements: 120 VAC @ 15A Main Cabinet Power Consumption: Base Cabinet=360W (493 VA), Expansion Cabinet=360W (493 VA), total 720W (986 VA)
Page 232 Section 4: SpeciÞcations and Parts List Aspire XL Electrical SpeciÞcations Power Supply AC Power Supply Dedicated 15 Amp circuit Input Voltage: 85VAC to 135VAC Frequency: 50/60 Hz Rated Input: 100Vac / 120Vac / 220-240Vac 7.6A / 6.1A / 3.3A-3.1A Main Output Terminal +3.3V...
Page 233 For the Aspire Soft Phone application, please conÞrm the following requirements are met for the PC. Minimum PC Requirements Aspire Soft Phone is installed on a PC. Please conÞrm that the PC meets the minimum PC requirements before installing the Aspire Soft Phone.
Page 234 Section 4: SpeciÞcations and Parts List CallAnalyst Requirements Ultra Call Analyst Minimum PC Requirements • PC with Pentium Processor • 256 MB RAM • VGA monitor 800 x 600 resolution (recommended SVGA 1024 x 768) • Windows Operating Software - 95/98/ME, NT-SP 3 or later, 2000, XP •...
Page 235 Section 4: SpeciÞcations and Parts List inDepth Requirements inDepth Server Requirements Minimum Recommended Computer/Processor Pentium II 300 Megahertz Pentium III 700 Megahertz (MHz) or equivalent (MHz) or above Memory RAM requirements depend on the operating system used: Windows 98 Second Edition 32 MB 64 MB Windows Millennium Edition...
Page 236 Section 4: SpeciÞcations and Parts List nDepth Requirements (cont’d) inDepth Client - Sub-Supervisor Requirements Minimum Recommended Computer/Processor Pentium II 300 Megahertz Pentium III 700 Megahertz (MHz) or equivalent (MHz) or above Operating System • Windows 98 Second • Microsoft Windows NT4 Edition with Service Pack 6a •...
Page 237 Section 4: SpeciÞcations and Parts List nDepth Requirements (cont’d) inDepth Client - inView LAN Wallboard Requirements Minimum Recommended Computer/Processor Pentium II 300 Megahertz (MHz) or equivalent Operating System • Windows Millennium Edition • Windows XP Home Edition • Microsoft Windows NT4 with Service Pack 6a •...
Page 238 Section 4: SpeciÞcations and Parts List Mechanical SpeciÞcations Equipment Width Depth Height Weight Aspire S KSU Cabinet 16 7/16” 5 3/8” 13 3/16” 13.22 lbs fully equipped Aspire M/L/XL KSU Cabinet 16 1/2” 10” 15 1/2” 55 lbs 11 oz...
Page 239 IEEE802.3 10Base-T and 100Base-TX Compliant Access CSMA/CD Capacity 10Base-T/100Base-TX; Aspire S: 1 Port for LAN Terminal Aspire: 8 Ports for LAN Terminal I/F (Layer 1) - Speed; 10Mbps/100Mpbs Auto Negotiation - Cable; Category 5 or better, Straight/Cross Cable Auto Crossover...
Page 240 Section 4: SpeciÞcations and Parts List Recommended Usage Guidelines for Cordless Phones In ideal conditions, multiple spread spectrum type cordless phones (Cordless II can be utilized in the same environment. However, due to the possible interference problems caused by the bases being placed in close proximity to each other, we recommend the following: Spread Spectrum Phones (Cordless II P /N 730088) Where users require greater range on the cordless phones and 3 or less cordless phones are being used...
Page 241 Section 4: SpeciÞcations and Parts List Cordless Lite II General Frequency Control Phase Lock Loop Modulation 900 MHz Narrow Band FM with ADPMC (digital) Operating Temperature C - +50 C (+32 F to +122 Bandwidth 50 kHz Data Transmission Speed 688 bps Channels 30 Channels...
Page 242 Section 4: SpeciÞcations and Parts List FCC Registration Information Manufacturer: NEC Infrontia, Inc. FCC Part 15 Registration: Class A Model: Aspire S FCC Registration Number: KF: US:NIFKF06BASPIRES (Refer to the label on the System Cabinet for the MF: US:NIFMF06BASPIRES FCC Registration Number.
Page 243 Telephone Network except when: (1) a call is unanswered; (2) a busy tone is received; (3) a reorder tone is received. When ordering DID Service, provide the telco with the following information: Aspire S FCC Registration Number: US:NIFKF06BASPIRES US:NIFMF06BASPIRES US:NIFPF06BASPIRES...
Page 244 2PGDAD Modules must be a dedicated, isolated cable pair. 4. The Telco RJ21X and cross-connect blocks should install to the right of the Main Cabinet. Extension blocks and cross-connect blocks should be installed to the left of the Main Cabinet. Aspire S Cable Requirements Device Cable Type...
Page 245 Section 4: SpeciÞcations and Parts List Aspire S Cable Requirements Device Cable Type Cable Run Length (ft) Notes CPU to PC: Serial cross cable 49.21 (15 meters) D-Sub 9-Pin Female (PC) to D-Sub 9-Pin Male (CPU) 4-wire LAN (UTP) cable 328.08 (100 meters)
Page 246 Section 4: SpeciÞcations and Parts List Aspire M/L/XL Cable Requirements Device Cable Type Cable Run Length (ft) Notes Key Telephone, DSS 2-wire 26 AWG 1312 Console: 2-wire 24 AWG 1968 2-wire 22 AWG 2624 Single Line Telephone, 2-wire 26 AWG...
Page 247 Section 4: SpeciÞcations and Parts List Aspire M/L/XL Cable Requirements Device Cable Type Cable Run Length (ft) Notes 2/4/8BRIU to ISDN 4-wire 24 AWG 100m with Point-Multi- Terminals: point short connection 300m with Point-Multi- point long connection 500m with Point-Point...
Page 248: Aspire S Configuration Guide
Section 4: SpeciÞcations and Parts List Aspire S ConÞguration Guide System Cabinet Slot Assignment 8-Channel Digital/Analog Slots * Slots 1 and 2 are fixed - these are located on the CPU and are part of the basic system. Product Description...
Page 249: Aspire M/L/Xl Configuration Guide
Section 4: SpeciÞcations and Parts List Aspire M/L/XL ConÞguration Guide Expansion Cabinet Power Supply Type Qty 1 - P/N 0891000 Qty 2 - P/N 0891000 Qty 1 - P/N 0892011 and P/N 0892012 Slot Assignment 32-Channel Digital/Analog Slots Main Cabinet...
Page 250: Parts List
34-Button Handsfree Display Telephone - White 0890046 34-Button Super Display Telephone - Black 0890049 34-Button Super Display Telephone - White 0890050 34-Button Aspire IPhone - Black 0890065 24-Button DLS Console - Black 0890053 24-Button DLS Console - White 0890054 110-Button DSS Console - Black...
Page 251 NEC Cordless II - Cordless II Leather Case 730622 NEC Cordless II - Replacement Battery 730087 NEC Cordless Lite II Telephone (Uses 1 Aspire digital station port) 730631 NEC Cordless Lite II - Replacement Battery 730633 NEC Cordless Lite II - Wall Mount Unit for Charger...
Page 252 Rainbow Voice Tube Pack for Encore and Tristar (Pkg of 6) 750653 Rainbow Voice Tube Pack for Mirage and Supra (Pkg of 6) 0890060 IP Adapter (IP) 780122 In-Line Power Adapter (ILPA) NEC Audio Emcee: 750316 Audio Emcee 750317 Replacement Audio Emcee Remote 750318 Replacement RCA Cable...
Page 253 0893641 NEC USB Handset 780094 NEC USB Headset 750638 inDepth/inDepth Plus - Aspire M/L/XL Only Aspire inDepth Lite Software (Dongle and Software) 0892144 Aspire inDepth Software (Dongle and Software) 0892102 Aspire inDepth+ Software (Dongle and Software) 0892103 Aspire inDepth Supervisor...
Page 254 4 CO Loop Start Trunk PCB 0891046 2 DID/OPX PCB 0891047 2 BRI PCB - 0891050 Check with your NEC Sales Representative for availability. Station Interfaces 8 Aspire S Digital Station PCB 0891051 4 Analog Station PCB 0891048 4 Analog Station Expansion Daughter Board...
Page 255 Power Supply Set - Includes: 0890069 AC/DC Power Supply - Aspire XL 0892011 DC/DC Converter - Aspire XL 0892012 Power Supply Cable for Power - Aspire XL 0892013 Power Supply Cable for Signal - Aspire XL 0892010 Power Supply Cabinet - Aspire XL 0890068 19”...
Page 256 0891006 4 BRI PCB 0891007 8 BRI PCB 0891008 PRI/T1 PCB 0891009 Station Interfaces 8 Aspire Digital Station PCB 0891015 16 Aspire Digital Station PCB 0891014 32 Aspire Digital Station PB 0891058 16 i-Series Digital Station PCB 0891016 8 Analog Station PCB...
Page 257 Aspire IP Telephone/BlueÞre IX1035 Bundle (Contains 2 0890065 0892030 IPhones and Router) Aspire/BlueÞre IX1035 IAD 16 Port Bundle (16 Port IP Card and 0892035 Router with T1) - Requires PALA (0891039) or NTCPU-B1 Aspire/BlueÞre IX1035 IAD 4PORT Bundle (IP Card and Router with T1) 0892036 BlueÞre 24 Port 10/100 Base-T Layer 2 Switch with POE, With Power Over...
Page 258 Section 4: SpeciÞcations and Parts List Desi Labels Description Part Number Analog Telephones: Desi Labels for 780020/780021 - Black, Package of 25 780400 Desi Labels for 780020/780021 - Green, Package of 25 780401 Desi Labels for 780020/780021 - Silver, Package of 25 780402 Desi Labels for 780020/780021 - White, Package of 25 780403...
Page 259 Section 4: SpeciÞcations and Parts List Desi Labels Description Part Number 22-Button Display Telephones: Desi Label for 22BTN Display Tel-Silver (25-pkg), For Laser Jet 0893701 printers only Desi Label for 22BTN Display Tel-Solid Silver (25-pkg), or Ink Jet and 0893761 Laser Jet printers - solid silver Desi Label for 22BTN Display Tel-Black (25-pkg), For Ink Jet and 0893721...
Page 260 Aspire Faceplate Kit - 22B Non-Display Telephone, Package of 10 with 0892000 40 Rivets Aspire Faceplate Kit - 22B Display Telephone, Package of 10 with 40 0892001 Rivets Aspire Faceplate Kit - 34B Display Telephone, Package of 10 with 40...
Page 261 NEC Unified Solutions, Inc. 4 Forest Parkway, Shelton, CT 06484 Tel: 800-365-1928 Fax: 203-926-5458 www.necunifiedsolutions.com Other Important Telephone Numbers Sales: ........203-926-5450 Customer Service: .
Page 262 NEC UniÞed Solutions, Inc. 4 Forest Parkway, Shelton, CT 06484 *0893010* TEL: 800-365-1928 FAX: 203-926-5458 February 28, 2006 www.necuniÞedsolutions.com 0893010 Printed in U.S.A.

This manual is also suitable for:

Aspire s Aspire m Aspire l Aspire xl

NEC Aspire Manual

Quick Links

Related Manuals for NEC Aspire

Summary of Contents for NEC Aspire

This manual is also suitable for:

Table of Contents