NEC PlasmaSync 60XP10 Installation Manual
60” plasma display
Hide thumbs
Also See for PlasmaSync 60XP10:
- User manual (44 pages) ,
- Brochure (3 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Quick Links
P60XP10-BK Installation Guide
60" Plasma Display
Contents:
Optional Stand Dimensions ___________ __
Product Description
Type:
Plasma Display
Resolution:
1366x768
Aspect Ratio:
16:9
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to
be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the display and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to
fill the screen using the menus (see "Aspect Modes" in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Maximum Tilt Angles
Below are the maximum angles that the display can be tilted in both landscape and portrait mode
Landscape 20°
Portrait 20°
www.necvisualsystems.com
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
________
Page 7
Page 8
Page 9, 10
NEC Corporation of America
Screen Surface: Anti-Reflective
Dimensions:
56.97"(W) x 34.28"(H) x 5.00"(D)
Weight:
151.0 lbs
FCC:
Class B
P60XP10-BK
Visual Systems Division
Rev 1.0
Page 1 of 10
Advertisement
Table of Contents
Related Manuals for NEC PlasmaSync 60XP10
Summary of Contents for NEC PlasmaSync 60XP10
-
Page 1: Table Of Contents
Page 5 Page 6 ________ Page 7 Page 8 Page 9, 10 Screen Surface: Anti-Reflective Dimensions: Weight: FCC: P60XP10-BK NEC Corporation of America Visual Systems Division Rev 1.0 56.97”(W) x 34.28”(H) x 5.00”(D) 151.0 lbs Class B Page 1 of 10... -
Page 2: Ventilation Requirements
NOTE: The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and recommendations. -
Page 3: Display Dimensions
NEC Corporation of America Visual Systems Division P60XP10-BK Installation Guide 60” Plasma Display Rev 1.0 Display dimensions www.necvisualsystems.com P60XP10-BK Page 3 of 10... -
Page 4: Rear
NEC Corporation of America Visual Systems Division P60XP10-BK Installation Guide 60” Plasma Display Rev 1.0 Display dimensions (cont.) www.necvisualsystems.com P60XP10-BK Page 4 of 10... -
Page 5: Display Dimensions W/Optional Speakers And Stand
NEC Corporation of America Visual Systems Division P60XP10-BK Installation Guide 60” Plasma Display Rev 1.0 Dimensions with optional speakers and stand www.necvisualsystems.com P60XP10-BK Page 5 of 10... -
Page 6: Optional Stand Dimensions
P60XP10-BK Installation Guide 60” Plasma Display Optional Speakers and Stand Dimensions Table Top Stand ST-P60P1 www.necvisualsystems.com NEC Corporation of America Visual Systems Division P60XP10-BK Page 6 of 10 Rev 1.0... -
Page 7: Optional Speakers Dimensions
P60XP10-BK Installation Guide 60” Plasma Display www.necvisualsystems.com NEC Corporation of America Visual Systems Division Optional Speakers SP-P42P1 P60XP10-BK Rev 1.0 Page 7 of 10... -
Page 8: Connections
NEC Corporation of America Visual Systems Division P60XP10-BK Installation Guide 60” Plasma Display Rev 1.0 Connections Located at Bottom of Display Control Buttons www.necvisualsystems.com P60XP10-BK Page 8 of 10... -
Page 9: Pc Control
'CR' '0'-'0' 'CR' '0'-'0' 'v'-'P' 'CR' '0'-'0' 'v'-'I' 'CR' '0'-'0' 'v'-'M' 'CR' Command1 Command2 Data length NEC Corporation of America Visual Systems Division Data length Data Notes Message STX-'B'-'1'-ETX STX-'B'-'E'-ETX Item OP code page V-POSITION H-POSITION V-HIGHT H-WIDTH CLOCK PHASE... - Page 10 NEC Corporation of America Visual Systems Division P60XP10-BK Installation Guide 60” Plasma Display Rev 1.0 PC Control Connector (D-Sub 9P) NOTE: The only connections required are pins 2 (RxD), 3 (TxD) and 5 (GND). www.necvisualsystems.com P60XP10-BK Page 10 of 10...