NEC GT5000 Network Setup Manual
Wireless lan quick setup guide
Hide thumbs
Also See for GT5000:
- User manual (105 pages) ,
- Brochure & specs (12 pages) ,
- Installation manual (10 pages)
Related Manuals for NEC GT5000
Summary of Contents for NEC GT5000
-
Page 1: Wireless Lan
Wireless LAN Quick Setup Guide for the following models: LT220/240/240K/260/260K MT860/1060/1060R/1065 GT5000/6000/6000R Projector Setup Windows Setup Using NEC Software v2.0 NEC Solutions (America), Inc. Visual Systems... -
Page 2: Projector Setup
Only the following Wireless LAN cards will work in the projector: •Samsung MagicLAN (5volt version only) •Linksys WPC11 •ZCOM LANEscape XI-300 Click on OK and the projector is ready for use. Open the projector’s LAN menu and click on manual IP setting and use the IP address 192.168.010.011... -
Page 3: Windows Setup
Windows Setup There are a variety of Wireless LAN cards available. We recommend that you select a WiFi compliant card for your PC. Insert you selected Wireless LAN card into the PCMCIA slot of your laptop and wait for the new found hardware wizard to appear. Do not install any utilities included with your LAN card. - Page 4 Continued 1- Next, Click on TCP/IP and then Properties. (Note: There may be several TCP/IP configurations. Make sure you click on the one related to the Wireless LAN card.) 2- Click to change the IP address manually and input the IP and subnet mask settings as shown.
- Page 5 Using NEC Software Start NEC Dynamic Image Utilities. Click on Options, then Communication settings. A window will appear where you will select Autosearch LAN. The software will search and detect any projectors that are connected to LAN or are in range or Wireless...
- Page 6 Image Express Utility Start. A list will appear with all the projectors that are present and available. Put a checkmark in the box before a projector and click on connect. Once connected to a projector, an icon will appear in the Systems Tray resembling a projector.
- Page 7 Continued Finally, you can go into projector control mode by clicking on Mode, then PJ Manager. A menu will appear with all the available projectors and their status. You can control any and all projectors on the list.