Purpose
Display scan results
Turn the Auto Start Scan Mode On
Turn the wireless network connection
On
Set the Date and Time
Change for Daylight Saving Time
Automatically
Change the Language Displayed on
the LCD
Related Information
•
Change Machine Settings from the Control Panel
Operation
Settings > General Setup >
Display Scan Result
Settings > General Setup >
Auto Start Scan Mode > On
Settings > Network >
WLAN(Wi-Fi) > WLAN Enable
Settings > Initial Setup >
Date & Time
Settings > Initial Setup >
Date & Time > Auto Daylight
Settings > Initial Setup >
Local Language
Description
Set the LCD to display how many
pages are scanned and how many
are skipped.
Scanning starts automatically using
the settings saved as the auto scan
shortcut (Shortcut 21) when you place
a document in the ADF. It is not
necessary to press the Scan Button.
The auto scan shortcut can be
registered from Shortcuts, which is
used to register the regular shortcuts.
Turn the wireless network connection
On or Off.
Set the date and time. If you set Auto
Daylight to On, the time will be
adjusted forward one hour in the
spring and adjusted backward one
hour in the fall.
Set the machine to change
automatically for Daylight Saving
Time. It will reset itself forward one
hour in the spring and backward one
hour in the fall. Make sure you have
set the correct date and time in the
Date and Time setting.
This feature is available only in some
countries.
Change your LCD language.
223