NEC ME401W, ME361W, ME331W, ME301W, ME401X, ME361X, ME331X, ME301X Quick Setup Guide

Quick Setup Guide

1. Connect your computer to the projector using the supplied computer cable (VGA).
2. Connect the supplied power cord.
   
3. Remove the lens cap.
   
4. Turn on the projector.
   Press the (POWER) button on the projector cabinet or the POWER ON button on the remote control.
   
   NOTE: The color of the POWER indicator
   
5. Select a source.
   
   TIP: Press the AUTO ADJ. button to optimize an RGB image automatically.
   
6. Adjust an image size and position.
   [Throw angle (Tilt foot)]
   
   1. Lift the front edge of the projector.
   2. Push up and hold the Adjustable Tilt Foot Lever.
   3. Lower the front of the projector to the desired height.
   4. Release the Adjustable Tilt Foot Lever.

TIP: Automatic Keystone Correction function is turned on at the time of shipment.

[FOCUS]
Turn the focus ring.

[ZOOM]
Turn the zoom lever.

7. Turn off the projector.
   1. Press the (POWER) button on the projector cabinet or the STANDBY button on the remote control.
      
      
   2. Press either the (POWER) or the STANDBY button again.
   3. Mount the lens cap.
   4. Disconnect all the cables.

NOTE: The color of the POWER indicator

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download NEC ME401W, ME361W, ME331W, ME301W, ME401X, ME361X, ME331X, ME301X Quick Setup Guide