Table of Contents
Advertisement
6.3.4
Resetting disks to Non-RAID
Take caution before you reset a RAID volume hard disk drive to non-RAID.
Resetting a RAID volume hard disk drive deletes all internal RAID structure on
the drive.
To reset a RAID set hard disk drive:
From the utility main menu, select 3. Reset Disks to Non-RAID and press
1.
<Enter>. The following screen appears.
Resetting RAID disk will remove its RAID structures
and revert it to a non-RAID disk.
WARNING: Resetting a disk causes all data on the disk to be lost.
(This does not apply to Recovery volumes)
Port Drive Model
0
ST3300656SS HWAS0000991753TR 279.3GB
1
ST3300656SS 37VN00009846RAJ1 279.3GB
[ ↑↓ ]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete
2.
Use the up/down arrow keys to select the RAID set drive(s) you want to reset,
and then press <Space> to select.
3.
Press <Enter> to reset the RAID set drive(s). A confirmation message
appears.
4.
Press <Y> to reset the drive(s) or press <N> to return to the utility main
menu.
6-30
[
RESET RAID DATA
Serial #
Size
Select the disks that should be reset.
]
Status
Member Disk
Member Disk
Chapter 6: RAID configuration
Advertisement
Table of Contents
