Table of Contents
Advertisement
3.
The utility immediately starts rebuilding after the disk is selected. The status
of the degraded RAID volume is changed to "Rebuild".
Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.0.0.1104 Copyright(C)
RAID Volumes:
ID
0
Physical Devices:
Port Drive Model
1
2
Volumes with "Rebuild" status will be rebuilt within the operating system.
[↑↓]-Select
4.
Exit Intel Rapid Storage Technology and reboot the system.
5.
Under Microsoft
Storage > Intel Rapid Storage Console or click the Intel Rapid Storage
Technology tray icon to load the Intel Rapid Storage Manager utility.
From the View menu, select Advanced Mode to display the details of the
6.
Intel Rapid Storage Console.
From the Volumes view option, select RAID volume to view the rebuilding
7.
status. When finished, the status is changed to "Normal".
Rebuilding the RAID with a new hard disk
If any of the SATA hard disk drives included in the RAID array failed, the system
displays the status of the RAID volume as "Degraded" during POST. You may
replace the disk drive and rebuild the RAID array.
To rebuild the RAID with a new hard disk:
1.
Remove the failed SATA hard disk and install a new SATA hard disk of the
same specification into the same SATA Port.
Select a destination disk with the same size as the original hard disk.
Reboot the system and then follow the steps in section Rebuilding the RAID
2.
with other non-RAID disk.
6-32
2003-11 Intel Corporation. All Rights Reserved.
1. Create RAID Volume
2. Delete RAID Volume
[
DISK/VOLUME INFORMATION
Name
Level
Volume0
RAID1(Mirror)
Serial #
ST3160812AS
9LS0F4HL
ST3160812AS
3LS0JYL8
Windows OS, select Start > Programs > Intel Rapid
®
[
MAIN MENU
]
3. Reset Disks to Non-RAID
4. Exit
]
*
Strip
Size
Status
N/A
149.0GB
Rebuild
Size
Type/Status(Vol ID)
149.0GB
Member Disk(0)
149.0GB
Member Disk(0)
[ESC]-Exit
[ENTER]-Select Menu
= Data is Encrypted
Bootable
Yes
Chapter 6: RAID configuration
Advertisement
Table of Contents
