Installing or Replacing a 3-kW DC Power Supply
3. Slide the handle on the middle of the release lever toward the end of the lever and rotate the lever away from the
front of the power supply. Push the power supply all the way into the slot. See the following figure.
1
Slide and hold the middle handle next to the outer
handle.
2
Fully rotate the release lever away from the front
of the module.
Cisco Nexus 9504 ACI-Mode Switch Hardware Installation Guide
76
Replacing or Installing Modules, Fan Trays, and Power Supplies
4
Rotate the lever toward the front of the module.
5
Make sure that the other end of the lever grabs the
front of the chassis to push the module onto the
connectors inside the slot.