Table of Contents
Advertisement
Installing the Input output board
1. Place the Input output(I/O) board to its slot in the system.
2. Replace the two M2.0 x 4 screws to secure the I/O board to the system board.
3. Connect the I/O cable and the fingerprint cable and close the latch to secure it to the I/O board.
4. Install the:
a.
WLAN
b.
solid state drive(SSD)
c.
base cover
5. Follow the procedure in
Power button
Removing the power button
1. Follow the procedure in
2. Remove the: .
a.
base cover
b.
WLAN card
c.
Input output(I/O) board
3. To remove the power button:
a. Remove the two M2.5 x 6 screws securing the right display hinge to the system [1].
24
Removing and installing components
After working inside your
Before working inside your
computer.
computer.
Advertisement
Table of Contents
