Table of Contents
Advertisement
Installing the Input/Output board
1. Connect the input/output (I/O board) cable to the I/O board.
2. Replace the black adhesive tape to secure the i/o board cable.
3. Turn the I/O board over and align it with the screw holder on the computer.
4. Insert the I/O board into the computer.
5. Tighten the screw to secure the I/O board to the computer.
6. Install the:
a.
base cover
b.
keyboard
c.
optical drive
d.
battery
7. Follow the procedure in
Removing the speakers
1. Follow the procedure in
2. Remove the:
a.
battery
b.
optical drive
c.
keyboard
d.
base cover
3. To remove the speakers:
a. Disconnect the speaker cable [1].
b. Unroute the cables and remove the speakers from the computer [2].
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
23
Advertisement
Table of Contents
