Table of Contents
Advertisement
Installing cooling shroud
NOTE:
When inserting the shroud on the processor assembly, please ensure that the data and power cables of the optical drive
do not get caught inside the shroud.
1
Align the slots on the cooling shroud, with the screws on the heat sink.
2
Insert the cooling shroud over the processor assembly.
3
Install the cover.
4
Follow the procedure in
Coin-cell battery
Removing coin cell battery
1
Follow the procedure in
2
Remove the:
a
cover
b
cooling shroud
c
expansion card
3
To remove the coin cell battery:
a
Using a plastic scribe press the release latch until the coin cell battery pops out [1].
After working inside your
computer.
Before working inside your
computer.
Disassembly and reassembly
19
Advertisement
Table of Contents
