Table of Contents
Advertisement
Replacing the I/O board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Place the I/O board on the palm-rest assembly.
2
Align the screw holes on the I/O board with the screw holes on the palm-rest
assembly.
3
Replace the two screws (M2x3) that secure the I/O board to the palm-rest
assembly.
4
Connect the coin-cell battery cable to the I/O board.
5
Slide the I/O-board cable into the connector on the I/O board and close the
latch to secure the cable.
6
Adhere the tape that secures the I/O-board cable to the I/O board.
Post-requisites
1
Replace the
wireless
2
Replace the
base
56
computer. After working inside your computer, follow
After working inside your
card.
cover.
computer. For more safety best
www.dell.com/
Before
Advertisement
Table of Contents
