Table of Contents
Advertisement
Removing the display assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
base
2
Remove the battery.
3
Remove the
rear
4
Remove the
wireless
5
Follow the procedure from step 1 to step 8 in
keyboard
assembly".
Procedure
1
Using the pull-tab, disconnect the camera cable from the system board.
2
Peel off the camera cable from the computer base.
3
Note the antenna cables routing and remove the antenna cables from the
routing guides on the computer base.
4
Remove the screw (M3x3) that secures the display-cable bracket to the system
board.
5
Lift the display-cable bracket off the computer base.
6
Using the pull tab, disconnect the display cable from the system board.
82
computer. After working inside your computer, follow
After working inside your
cover.
cover.
card.
computer. For more safety best
www.dell.com/
"Removing the palm rest and
Before
Advertisement
Table of Contents
