Table of Contents
Advertisement
Setting Up Using the Setup Guide
When the machine is turned on (
assist you to configure the initial settings of the machine by following the on-screen guidance. In the Setup Guide, the
setting screens are displayed in the following order.
Step 1
Set the language to be displayed on the operation panel screen or in reports, as well as the
country or region where the machine will be used.
Step 2
Adjust the machine's date/time.
Step 3
Set the System Manager ID that is the system manager account, and the Remote UI Access PIN.
If the PIN is not set, you cannot use the Remote UI.
Turning ON the Machine(P. 111) ) for the first time, the Setup Guide starts up to
Setting the Display Language and the Country or Region
1
Select a language.
2
Select <Yes>.
3
Select a country or region.
Setting the Date and Time
1
Select a time zone.
What is UTC?
●
Coordinated Universal Time (UTC) is the primary time standard by which the
world regulates clocks and time. The correct UTC time zone setting is required
for Internet communications.
2
Enter the date and time, and select <Apply>.
●
Tap the entry field, and enter the date and time.
Setting the Access Security Measures
1
Select <Yes>.
●
If you select <No>, the necessary setting to use the Remote UI is not
performed, and the Setup Guide proceeds to step 4.
2
Select <Yes>.
●
If you select <No>, the default values of the System Manager ID and PIN are
not changed, and the Setup Guide proceeds to step 4 under step 3.
3
Specify the System Manager ID and PIN.
●
Specify <System Manager ID>
●
Enter each value, and then select <Apply>.
●
After the confirmation screen appears, re-enter the PIN.
●
Do not forget your PIN.
Setting Up
<System Manager PIN>.
8
6C6U-003
Advertisement
Table of Contents
