Table of Contents
Advertisement
Information only; no action is required.
• FQXPMRS0011K: Failed to change disk drives' state.
Severity: Warning
User Action:
1. Ensure LXPM and RAID adapter firmware are at the latest levels.
2. Ensure the state of the RAID adapter and disk drives are both healty.
3. Verify proper physical connection of the disk drive, SAS expander (if applicable) and RAID adapter.
4. Ensure the operation to the special drive is legal or logical. (For example, you cannot change
Unconfigured BAD to Online satus)
5. Reboot the machine and retry to change disk drives' state.
6. If the problem persists, contact technical support.
• FQXPMSD0001M: HDD Test was interrupted by the host with a hardware or software reset
Severity: Error
User Action:
1. Remove A/C from the server and reseat all drives, backplanes, RAID adapters, expanders (if any), and
cables.
2. Ensure device firmware is at the latest level.
3. Retry the test.
4. If the problem persists, contact technical support.
• FQXPMSD0002M: A fatal error or unknown test error occurred while the device was executing its
self-test
Severity: Error
User Action:
1. Remove A/C from the server and reseat all drives, backplanes, RAID adapters, expanders (if any), and
cables.
2. Ensure device firmware is at the latest level.
3. Retry the test.
4. If the problem persists, contact technical support.
• FQXPMSD0003M: self-test completed having a test element that failed and the test element that
failed is not known.
Severity: Error
User Action:
1. Remove A/C from the server and reseat all drives, backplanes, RAID adapters, expanders (if any), and
cables.
2. Ensure device firmware is at the latest level.
3. Retry the test.
4. If the problem persists, contact technical support.
• FQXPMSD0004M: self-test completed having the electrical element of the test failed.
Severity: Error
.
Chapter 4
XClarity Provisioning Manager events
199
Advertisement
Table of Contents
