Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1.
SAFETY INSTRUCTIONS
1.1.
GENERAL SAFETY
WARNING! Ensure that Health & Safety, local authority and general workshop practice regulations are
F
adhered to when using this equipment.
WARNING! DO NOT aim the laser beams at your or another person’s or animal’s eye and beware of reflections
F
from mirrors or other shiny surfaces.
Familiarise yourself with the applications, limitations, and potential hazards of the thermometer.
!
Keep the thermometer clean and in good condition.
!
Protect the thermometer from the following:
!
Electro-magnetic fields from engine components closer than 125mm.
Static electricity.
Thermal shock caused by large and/or rapid ambient temperature change.
High temperatures.
DO NOT get the thermometer wet or use in damp or wet locations or areas where there is condensation.
&
DO NOT use the thermometer for any purpose other than for which it is designed.
&
DO NOT allow untrained persons (particularly children) to operate the thermometer.
&
DO NOT operate the thermometer when you are tired or under the influence of alcohol, drugs or
&
intoxicating medication.
1.2
LASER SAFETY
The VS900.V2 utilises a Class II laser that emits low levels of visible radiation (i.e. wavelengths between 400 and 700 nanometres) which
are safe for the skin but not inherently safe for the eyes. The Class II emission limit is set at the maximum level for which eye protection is
normally afforded by natural aversion responses to bright light. Accidental eye exposure is therefore normally safe, although the natural
aversion response can be overridden by deliberately staring into the beam, and can also be influenced by the use of alcohol or drugs.
WARNING! Do not look or stare into the laser beam as permanent eye damage could result.
F
DO NOT direct the laser beam at any person’s (or animal’s) eyes as eye damage could result.
%
DO NOT operate the thermometer when you are tired or under the influence of alcohol, drugs or intoxicating medication.
&
Be aware that reflections of the laser beam from mirrors or other shiny surfaces can be as hazardous as direct eye exposure.
!
2.
INTRODUCTION
New way to tackle diagnosis of engine and vehicle faults. VS900.V2 detects energy emission in the infra-red spectrum and converts it
into a temperature reading. Features laser pointer to indicate area being sampled. Temperature is displayed on large LCD panel with backlit
display for use in low light areas. Temperature can be shown in either
SPECIFICATION
Temperature Range ................................-50 to 280
Ambient Operating Range ............................0 to 50
Response time ....................................................Less than 1 second
Accuracy @ 18
C to 28
C Ambient,
O
O
Target Temperature ..........................................................Accuracy
-50 to -20
C ..............................................................................±5
O
-20 to -280
C ............................................................±2% of reading
O
Over range indication ..............................................LCD will show ‘1’
Emissivity ..................................................................0.95 fixed value
Laser
....................Output <1mW, Wavelength 630-670nm Class ll
Display ..........................................3-1/2 digit LCD with backlighting
Display Hold Time ................................................7 seconds approx.
Battery ....................................9V Alkaline or Ni-Cad (not supplied)
Weight ..............................................................................180grams
C or
F. Powered by 9V battery (not included).
O
O
C (-58 to 536
F)
O
O
C (32 to 122
F)
O
O
C
O
INSTRUCTIONS FOR:
INFRARED LASER THERMOMETER
VS900.V2
Model:
MAIN FEATURES
1. Infrared sensor
2. Laser pointer beam
3. LCD Display
4.
F select key
O
5.
C select key
O
6. Laser select key
7. Backlight select key
8. Measurement trigger
9. Battery cover
10. Handle grip
fig. 1
VS900.V2 - 2 - 090304
Advertisement
Related Manuals for Sealey VS900.V2
Summary of Contents for Sealey VS900.V2
- Page 1 LASER SAFETY The VS900.V2 utilises a Class II laser that emits low levels of visible radiation (i.e. wavelengths between 400 and 700 nanometres) which are safe for the skin but not inherently safe for the eyes. The Class II emission limit is set at the maximum level for which eye protection is normally afforded by natural aversion responses to bright light.
- Page 2 The outlet hose/pipe should be approximately 10 C cooler than the inlet. If the differential is significantly more than this the flow through the heater core is restricted and the system should be investigated. VS900.V2 - 2 - 090304...
- Page 3 93/68/EEC CE Marking Directive For Jack Sealey Ltd. Sole importer into the UK of Sealey Professional Tools. NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.