hit counter script
Makita 9561 Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Grinder
  5. 9561
  6. Instruction manual
Makita 9561 Instruction Manual

Makita 9561 Instruction Manual

115 mm (4-1/2”)
Hide thumbs Also See for 9561:
Table of Contents

Advertisement

Quick Links

Download this manual
Angle Grinder
115 mm (4-1/2")
MODEL 9561
115 mm (4-1/2")
MODEL 9564CV
125 mm (5")
MODEL 9565CV
I N S T R U C T I O N
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
DOUBLE
INSULATION
M A N U A L

Advertisement

Table of Contents
loading

Related Manuals for Makita 9561

Summary of Contents for Makita 9561

  • Page 1 Angle Grinder 115 mm (4-1/2”) MODEL 9561 115 mm (4-1/2”) MODEL 9564CV 125 mm (5”) MODEL 9565CV DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using.

  • Page 2: Specifications

    SPECIFICATIONS Model 9561 9564CV 9565CV No load speed (RPM) 10,500/min 2,800-10,500/min 2,800-10,500/min 299 mm 299 mm Overall length 289 mm (11-3/8”) (11-3/4”) (11-3/4”) Net weight 1.7 kg (3.7 lbs) 1.8 kg (4.0 lbs) 1.8 kg (4.0 lbs) Spindle thread 5/8”...
  • Page 3 5. Avoid body contact with grounded sur- be used for appropriate conditions. Ordinary faces such as pipes, radiators, ranges and eye or sun glasses are NOT eye protection. refrigerators. There is an increased risk of Tool Use and Care electric shock if your body is grounded. 15.

  • Page 4: Specific Safety Rules

    24. When servicing a tool, use only identical Use of unauthorized parts or failure to follow replacement parts. Follow instructions in Maintenance instructions may create a risk of the Maintenance section of this manual. electric shock or injury. USE PROPER EXTENSION CORD: Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw.
  • Page 5 8. Be careful not to damage the spindle, the poor installation or a poorly balanced flange (especially the installing surface) wheel. or the lock nut. Damage to these parts 15. Use the specified surface of the wheel to could result in wheel breakage. perform the grinding.

  • Page 6: Functional Description

    FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Shaft lock 002978 CAUTION: • Never actuate the shaft lock when the spindle is moving. The tool may be damaged. Press the shaft lock to prevent spindle rotation when install- ing or removing accessories.
  • Page 7 Number RPM (/min) CAUTION: 2,800 • If the tool is operated continuously at low speeds for a 4,000 long time, the motor will get overloaded and heated up. 6,500 • The speed adjusting dial can be turned only as far as 5 9,000 and back to 1.
  • Page 8 Installing or removing wheel guard 002980 CAUTION: • When using a depressed center grinding wheel/Multi- disc, flex wheel, wire wheel brush or cut-off wheel, the wheel guard must be fitted on the tool so that the closed side of the guard always points toward the operator. 1.

  • Page 9: Operation

    Installing or removing flex wheel 001096 (optional accessory) WARNING: • Always use supplied guard when flex wheel is on tool. Wheel can shatter during use and guard helps to reduce chances of personal injury. Follow instructions for depressed center grinding wheel/ 1.
  • Page 10 CAUTION: • After operation, always switch off the tool and wait until the wheel has come to a complete stop before putting the tool down. Grinding and sanding operation 002983 ALWAYS hold the tool firmly with one hand on housing and the other on the side handle.

  • Page 11: Maintenance

    To maintain product SAFETY and RELIABILITY, repairs, car- bon brush inspection and replacement, any other mainte- 1. Exhaust vent 2. Inhalation vent nance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.
  • Page 12 A cut-off wheel can also be used with an optional guard. If you decide to use your Makita grinder with approved accessories which you purchase from your Makita distributor or factory service center, be sure to obtain and use all necessary fasteners and guards as recommended in this manual.
  • Page 13 If you need any assistance for more details regarding these accessories, ask your local Makita service center. 001180 9561/9564CV 9565CV Grip 36 Wheel guard Inner flange 45 Depressed center grinding wheel/Multi-disc Lock nut 5/8-45 Rubber pad 100 Rubber pad 115...
  • Page 14 Memo...
  • Page 15 Memo...
  • Page 16 Memo...
  • Page 17 Stamp Timbre Makita Canada Inc. 1950 Forbes Street, Whitby, Ontario L1N 7B7 Fold...
  • Page 18 Your answers to the following questions are appreciated. 1. This product was purchased from? 3. How did you first learn of Makita Power Tools? Hardware/Lumber Store Industrial Supply Magazine/Newspaper Catalog Tool Distributor Other ( From dealer Other ( Store display 2.
  • Page 19 When you need service... DATE • Explain the problem in a letter PURCHASED: • Enclose the letter with the tool DEALER’S NAME • Package carefully and send prepaid & ADDRESS: to the nearest Makita factory or authorized service centre MODEL NO.: SERIAL NO.:...
  • Page 20 WARRANTY. “The Makita Warranty is the only and the entire written warranty given by Makita for the Makita tools. No dealer or his agent or employee is authorized to extend or enlarge upon this warranty by any verbal or written statement or advertisement.”...

Table of Contents