Related Manuals for Lenovo IdeaCentre B3 Series
Summary of Contents for Lenovo IdeaCentre B3 Series
- Page 1 Machine type: 10133/F0A4 [B350] 10134/F0A5 [B355] Lenovo IdeaCentre B3 Series User Guide Version 1.0 2013.09 31505339...
-
Page 2: Important Safety Information
Attention: Be aware of possible damage to programs, devices, or data. Note: Pay attention to this important information. © Copyright Lenovo 2013. All rights reserved. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or... -
Page 4: Table Of Contents
Contents Important Safety Information Using the Computer Hardware ..........1 Front view of the computer .................2 Left and right views of the computer ............3 Rear view of the computer .................4 Computer stand ..................5 Basic connector instructions ..............6 Connecting your computer .................7 Important information about using the computer ........8 Connecting to the Internet ................10 Wired keyboard (selected models only) ............11... - Page 5 Using the Rescue System ............25 OneKey Recovery ..................26 Driver and Application Installation .............27 Using the Software ..............29 Lenovo Support ..................30 Troubleshooting and Confirming Setup ......... 31 Troubleshooting Display Problems ............32 Troubleshooting Touch screen ..............33 Troubleshooting Audio Problems ..............33 Troubleshooting Software Problems ............34...
-
Page 6: Using The Computer Hardware
Using the Computer Hardware This chapter contains the following topics: Introduction to the computer hardware Information on computer connections Note: The descriptions in this chapter might be different from what you see on your computer, depending on the computer model and configuration. -
Page 7: Front View Of The Computer
Front view of the computer Attention: Be careful not to block any air vents on the computer. Blocked air vents can cause overheating. Built-in microphone Built-in camera Hard disk drive indicator Bluetooth status indicator Wi-Fi status indicator Volume down Volume up Brightness down Brightness up Built-in IR receiver (Only... -
Page 8: Left And Right Views Of The Computer
Left and right views of the computer Attention: Be sure not to block any air vents on the computer. Blocked air vents may cause thermal problems. Optical drive Power button USB 3.0 connector Headphone connector Microphone connector USB 3.0 connector Memory card reader User Guide... -
Page 9: Rear View Of The Computer
Rear view of the computer TV tuner port (selected models only) HDMI-out connector USB 3.0 connectors (2) USB 2.0 connectors (2) (selected models only) Ethernet connector Power connector Air vents (do not block) User Guide... -
Page 10: Computer Stand
Computer stand Use the stand to position the display to your preference. It can be rotated between 15° and 42° from the vertical. Attention: 1. The computer stand must remain installed at all times to ensure maximum system stability. 2. Make sure the angle of the computer is at least 15 degrees from the vertical;... -
Page 11: Basic Connector Instructions
Basic connector instructions Note: Your computer may not have all of the connectors described in this section. Connector Description Microphone Use this connector to attach a microphone to your computer when you want to record sound or if you use speech-recognition software. -
Page 12: Connecting Your Computer
Connecting your computer Connecting the power cord Connect the power cord to an electrical outlet. We recommend using a grounded connection or a surge protector. User Guide... -
Page 13: Important Information About Using The Computer
Important information about using the computer Press the power button on the side of the computer to turn on the computer. Note: The buttons at the bottom of the screen are touch buttons. When you touch these, the indicator lights turn on. User Guide... - Page 14 Hold the computer tightly when you carry it. User Guide...
-
Page 15: Connecting To The Internet
Connecting to the Internet To connect to the Internet, you’ll need a contract with an Internet Service Provider (ISP) and some hardware. IPSs and ISP offerings vary by country. Contact your ISP for offerings available in your country. Your computer is designed to support a wireless (selected models only) or wired network that connects your computer to other devices. -
Page 16: Wired Keyboard (Selected Models Only)
Wired keyboard (selected models only) LVT —— After entering Windows, press this key to launch the LVT (Lenovo Vantage Technology) program, Lenovo’s pre-loaded Home PC software. In addition to its own functions, the LVT program will allow you to start other Windows compatible software specially configured to run on this model of computer. - Page 17 User Guide...
-
Page 18: Using Windows 8.1
Using Windows 8.1 This chapter contains the following topics: Switching between the main Windows 8.1 interfaces The Charms Bar Shutting down the computer Switching between apps Closing an app Opening other system programs Windows Help and Support Attention: The Windows 8.1 operating system is provided by Microsoft Corporation. -
Page 19: Switching Between The Main Windows 8.1 Interfaces
Switching between the main Windows 8.1 interfaces Windows 8.1 comes with two main user interfaces: the Start Screen and the Windows desktop. To switch from the Start Screen to the Windows desktop, do one of the following: • Select the Windows desktop tile on the Start Screen. •... -
Page 20: Switching Between Apps
Switching between apps Sometimes you want to get back to an app you were just using, or quickly switch through your recent apps. To switch between apps: Move the cursor to the top left corner, then click to bring in the next app. (If your computer is equipped with touch screen, swipe in from the left edge of the screen to bring in the next app.) Closing an app... - Page 21 User Guide...
-
Page 22: Touch Screen Instructions
Touch screen instructions This chapter contains the following topics: Touch Screen Calibration User Gesture Instructions for the Touch screen Attentions when using the Touch Screen Attention: Only selected models are equipped with a touch screen. User Guide... -
Page 23: Touch Screen Calibration
The monitor is touch-sensitive thanks to its touch-sensitive screen. A touch screen is an input device just like a mouse or a keyboard, and the user’s fingers transmit position information via the touch screen to the computer. With this technology, you only need to touch the pictures or words on the computer display lightly with your finger, and the computer will react. - Page 24 Basic Hand Gestures 1. Single Click / Double Click For the item selected on the touch screen, with one finger touch it one or two times, to perform a single click or double click operation. This is similar to the action performed by clicking the mouse left button.
- Page 25 3. Dragging Movement First touch your finger on the desired item on the screen and hold it there, then make a dragging movement. This is similar to the click and drag movement you can make with a mouse. 4. Rolling Movement When you move your finger one time vertically (or horizontally) on the touch screen, this is called a Rolling Operation.
- Page 26 5. Zoom Operation Touch two fingers lightly on the desired item on the touch screen, then keeping both fingers on the screen, change the distance between them. By increasing (or decreasing) the distance, you can perform a zoom in (or zoom out) operation.
- Page 27 Related Touch Screen Settings • Select Hardware and Sound → Pen and Touch from the Settings charm. • Select touch actions which you wish to adjust. By clicking on “Settings”, you can adjust the “Speed” and “Spatial tolerance” parameters, to match the user’s natural way of double-clicking.
-
Page 28: Precautions When Using The Touch Screen
Precautions when using the Touch Screen 1. When using the touch screen, be careful not to tear the surface with any sharp objects. 2. To ensure normal use of the touch screen, ensure that both the screen surface and your fingers are clean and dry. 3. - Page 29 9. Avoid using the computer in sunlight, which will affect the function of the touch screen. Note: The touch screen will not affect other computer processes when used normally. 10. Recognition of touch gestures can be influenced by the following: •...
-
Page 30: Using The Rescue System
Using the Rescue System This chapter contains the following topics: OneKey Recovery Driver and Application Installation Attention: Using OneKey Recovery will result in loss of data. • You can restore the C: drive of the computer to factory default settings or to the last system backup status using OneKey Recovery. -
Page 31: Onekey Recovery
Note: The recovery files and relevant data used by the rescue system are saved in the service partition. If the service partition is deleted or damaged by someone other than authorized Lenovo service personnel, Lenovo will not be liable for any losses arising therefrom in any way. -
Page 32: Driver And Application Installation
Driver and Application Installation The Driver and Application Installation function in the rescue system provides a way for the user to conveniently reinstall all of the Lenovo applications and drivers that were shipped with your Lenovo hardware. Method 1: Automatic Installation Repeatedly press and release the F2 key once turning on the computer until the Lenovo Rescue System opens, then select Drivers and Application Installation. - Page 33 User Guide...
-
Page 34: Using The Software
Using the Software This chapter contains the following topic: Software instructions Note: The interface and functionality of these features will depend on which software was shipped with the computer model you purchased. User Guide... -
Page 35: Lenovo Support
Lenovo Support The Lenovo Support program enables you to register your computer with Lenovo, download and view user manuals for your computer, get the warranty information of your computer, and explore help and support information. To open this program, do the following: Click the Lenovo Support icon from the Start Screen or Search Screen. -
Page 36: Troubleshooting And Confirming Setup
Troubleshooting and Confirming Setup This chapter contains the following topic: Troubleshooting and Problem Resolution Note: The description of the TV tuner card in this manual is only applicable to machines which have the TV tuner card. It does not apply to machines that do not have a TV tuner card. -
Page 37: Troubleshooting Display Problems
3. If the LCD screen has a LCD On/Off button, check that the LCD screen has been turned on. If still cannot solve the problem, contact Lenovo Customer Service. Problem: You need to change the display property settings. Setting display background and icon properties: 1. -
Page 38: Troubleshooting Touch Screen
2. Move any interfering devices away from the computer. 3. If the problem persists, contact Lenovo Service. Troubleshooting Touch screen Problem: The touch screen reacts, but not where you are touching it. -
Page 39: Troubleshooting Software Problems
Problem: No sound from headphones. Troubleshooting and problem resolution: • Check the headphone cable connection — ensure that the headphone cable is securely inserted into the headphone connector. • Adjust the Windows volume control — select the speaker icon from the Settings Charm or click the arrow on taskbar to show the hidden icons in Windows desktop mode, then click the speaker icon. -
Page 40: Troubleshooting Problems With Optical Drives And Hard Disks
1. Check to determine if there is an optical drive icon in the resource manager of the operating system. If not, restart your computer. If there is still no icon, contact Lenovo Service. Otherwise, continue with the next step of this procedure. -
Page 41: Special Considerations For Troubleshooting Windows
The capacity of the hard disk as calculated using this method may be slightly different from the actual capacity due to the rounding of totals. Special considerations for troubleshooting Windows Record the following information as it may be useful later when troubleshooting system problems: The drivers for this computer model only support the Windows 8.1 system. -
Page 42: Performing Daily Maintenance Tasks
When do I need to change the boot mode? The default boot mode for your computer is the UEFI mode. If you need to install a legacy Windows operating system (any operating system before Windows 8.1) on your computer, you must change the boot mode to Legacy support. The legacy Windows operating system cannot be installed if you don’t change the boot mode. - Page 43 User Guide...
-
Page 44: Hardware Replacement Guide
Hardware Replacement Guide This chapter contains the following topics: Removing the computer cover Installing a wall mount bracket adapter Installing a B-CAS card Replacing a memory module Replacing the optical drive Replacing the hard disk drive ... -
Page 45: Overview
Safety and Warranty Guide that was included with your computer. If you no longer have this copy of the Safety and Warranty Guide, you can obtain one online from the Support Web site at http://support.lenovo.com. User Guide... - Page 46 • Parts information • Links to other useful sources of information To access this information, go to: http://support.lenovo.com Tools required To disassemble the computer, you need the following tools: • Wrist grounding strap and conductive mat for preventing electrostatic discharge •...
- Page 47 Handling static-sensitive devices Static electricity, although harmless to you, can seriously damage computer components. When you are replacing a part, do not open the anti-static package containing the new part until the defective part has been removed from the computer and you are ready to install the new part.
-
Page 48: Replacing Hardware
Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratching or other damage. - Page 49 To install a VESA wall mount Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the touch screen from scratching or other damage.
- Page 50 1. Push the stand lock upward to unlock it and then slide the stand out. 2. Align the VESA wall mount with the mounting holes on the computer, and then secure it to the computer with the 4 screws. User Guide...
- Page 51 Installing a B-CAS card Attention: Before using the TV function, a B-CAS card will need to be installed on to the computer. Follow the steps below to install the B-CAS card. Notes: Before installing the B-CAS card, make sure that you do the following: •...
- Page 52 Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the touch screen from scratching or other damage.
- Page 53 To remove the optical drive: Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the screen from scratching or other damage.
- Page 54 6. Push a small iron stick (paper clip) into the small hole on the optical drive cover so that the disk springs out as shown. 7. Remove the 2 screws that secure the optical drive to the metal bracket. 8. Use a small flat head screwdriver to press and push out the pins that secure the cover to the disk.
- Page 55 To replace the hard disk drive: Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the screen from scratching or other damage.
- Page 56 2. Push then slide the hard disk drive and bracket out of the chassis as shown. 3. Push the pins and release the hard disk drive from the bracket. User Guide...
- Page 57 Maintenance Manual (HMM) for the computer. To obtain copies of the Safety and Warranty Guide or HMM, go to the Support Web site at: http://support.lenovo.com To replace the keyboard: 1. Remove any media (disks, CDs, or memory cards) from the drives, shut down the operating system, and turn off the computer and all attached devices.
- Page 58 Maintenance Manual (HMM) for the computer. To obtain copies of the Safety and Warranty Guide or HMM, go to the Support Web site at: http://support.lenovo.com To replace the power cord: 1. Remove any media (disks, CDs, or memory cards) from the drives, shut down the operating system, and turn off the computer and all attached devices.
- Page 59 User Guide...
-
Page 60: Appendix
Thank you for using Lenovo products. Carefully read all documents shipped with your computer before you install and use the product for the first time. Lenovo is not responsible for any loss except when caused by installation and operations performed by Lenovo professional service personnel. -
Page 61: Trademarks
Phenom, AMD Sempron, Catalyst, Cool ‘n’ Quiet, CrossFire, PowerPlay, Radeon, and The Ultimate Visual Experience are trademarks of Advanced Micro Devices, Inc. Other company, product, or service names referred to herein or in other Lenovo publications may be trademarks or service marks of others. All rights reserved. -
Page 62: Energy Star Statement
For more information about ENERGY STAR, go to: http://www.energystar.gov. Lenovo encourages you to make efficient use of energy an integral part of your day-to-day operations. To help in this endeavor, Lenovo has preset the following... -
Page 63: Enabling Erp Compliance Mode
Enabling ErP compliance mode You can enable the energy-related products directive (ErP) compliance mode through the Power menu in the Setup Utility program. This mode reduces electricity consumption when your computer is in standby mode or turned off. To enable ErP compliance mode in the Setup Utility program, do the following: 1.