Canon imagePRESS C7000VP Reference Manual page 365
Hide thumbs
Also See for imagePRESS C7000VP:
- Trouble shooting information (137 pages) ,
- Customer expectation document (54 pages) ,
- Installation manual (38 pages)
Table of Contents
Advertisement
NOTE
• Each paper deck holds approximately 1,000 sheets of paper (80 g/m
• If there are instructions on the package of paper about which side of the
paper to load, follow those instructions.
• When the paper is loaded into the paper deck, the side facing down is the
one printed on.
• If problems occur, such as poor print quality or paper jams, try turning the
paper stack over, and reload it. However, you cannot turn the texture paper
and 1-Sided Coated paper over. Change the new paper.
• For more information on the print direction of preprinted paper (paper which
has logos or patterns already printed on it), see "Relationship between
Original Orientation and Preprinted Paper Output Chart," on p. A9-10.
• When loading paper, make sure that the height of the paper stack does not
exceed 20 mm. If the height of the paper stack exceeds 20 mm, the edges
of the paper stack may become curled or creased, and poor print quality
may result.
8
Lower the paper holder plate.
9
Change the paper deck's size plate to match the new paper
size.
2
).
10
Gently push the paper deck back into the machine until it
clicks into place in the closed position.
The inside lifter automatically rises, and prepares the paper deck for
printing.
CAUTION
When returning the paper deck to its original position, be careful not
to get your fingers caught, as this may result in personal injury.
IMPORTANT
When you change the paper size, make sure to store paper type in Register
Paper in Common Settings (from the Additional Functions screen).
Paper Decks
A7-10
Advertisement
Table of Contents
