free stats
Sealey SM3002 Instructions Manual
Sealey SM3002 Instructions Manual

Sealey SM3002 Instructions Manual

Metal working lathe

Advertisement

INSTRUCTIONS FOR
METAL WORKING LATHE
SM3002
MODEL:
SM3002 - 1 - 140303

Advertisement

Table of Contents
loading

Summary of Contents for Sealey SM3002

  • Page 1 INSTRUCTIONS FOR METAL WORKING LATHE SM3002 MODEL: SM3002 - 1 - 140303...
  • Page 2: Safety Instructions

    Device (RCD) is used. It is particularly important to use an RCD with portable products that are plugged into a supply which is not protected by an RCCB. If in any doubt consult a qualified electrician. You may obtain a Residual Current Device by contacting your Sealey dealer.
  • Page 3: Introduction & Specification

    2. INTRODUCTION & SPECIFICATION The SM3002 is a bench or stand mounted metal working lathe with a variable speed reversible drive and thread cutting facility. The machine is supplied with a chuck with internal and external jaws and safety guard. Complies with Machinery Directive 98/37/EC and is fully CE approved.A stand is available as an optional extra, Sealey Model No.
  • Page 4 DO NOT allow the tool to over-travel and come into contact with the chuck. 1.75 1, 4 or 5 Always be prepared to hit the emergency stop button if the leadscrew cannot be disengaged. Turning fig. 8 fig. 9 SM3002 - 1 - 140303...
  • Page 5: Maintenance

    98/37/EC Machinery Directive 93/68/EEC CE Marking Directive For Jack Sealey Ltd. Sole importer into the UK of Sealey Quality Machinery. NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
  • Page 6 Item Part No. Description Item Part No. Description Item Part No. Description SM3002.001 Base SM3002.038 Indicator SM3002.075 Half Nut Base SM3002.113 Stud, M10x65 SM3002.002 Chuck SM3002.039 Pinion, 25T SM3002.076 Angle Block SM3002.114 Cross Feed Screw SM3002.003 Spindle SM3002.040 Support Screw SM3002.077 Screw, M4x10...
  • Page 7 ACCESSORIES FOR: META L WORKING L ATHE SM3002 MODEL: These accessories are available from your Sealey dealer. Ø160mm Ø80mm Milling Attachment - SM3002MA Face Plate - SM3002FP 4-Jaw Chuck - SM30024JC Ø13mm, MT2 Tailstock Chuck - SM3002TC Spindle Centre - SM3002SC...

Table of Contents