hit counter script
Lenovo ThinkSystem SD530 V3 System Configuration Manual
  1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Server
  5. ThinkSystem SD530 V3
  6. System configuration manual
Lenovo ThinkSystem SD530 V3 System Configuration Manual

Lenovo ThinkSystem SD530 V3 System Configuration Manual

Hide thumbs Also See for ThinkSystem SD530 V3:
Table of Contents

Advertisement

Quick Links

Download this manual
ThinkSystem SD530 V3
System Configuration Guide
Machine Types: 7DD3, 7DDA

Advertisement

Table of Contents
loading

Related Manuals for Lenovo ThinkSystem SD530 V3

Summary of Contents for Lenovo ThinkSystem SD530 V3

  • Page 1 ThinkSystem SD530 V3 System Configuration Guide Machine Types: 7DD3, 7DDA...
  • Page 2 Before using this information and the product it supports, be sure to read and understand the safety information and the safety instructions, which are available at: https://pubs.lenovo.com/safety_documentation/ In addition, be sure that you are familiar with the terms and conditions of the Lenovo warranty for your server, which can be found at: http://datacentersupport.lenovo.com/warrantylookup First Edition (March 2024) ©...

  • Page 3: Table Of Contents

    Security advisories ....3 Set the network connection for the Lenovo XClarity Specifications ....5 Controller .

  • Page 7: Safety

    Vor der Installation dieses Produkts die Sicherheitshinweise lesen. Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza. Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet. Antes de instalar este produto, leia as Informações sobre Segurança. © Copyright Lenovo 2024...

  • Page 8: Safety Inspection Checklist

    1 & IEC 60950-1, the standard for Safety of Electronic Equipment within the Field of Audio/Video, Information Technology and Communication Technology. Lenovo assumes you are qualified in the servicing of equipment and trained in recognizing hazards energy levels in products. Access to the equipment is by the use of a tool, lock and key, or other means of security, and is controlled by the authority responsible for the location.
  • Page 9 Click Power ➙ Power Cables to see all line cords. • Make sure that the insulation is not frayed or worn. 3. Check for any obvious non-Lenovo alterations. Use good judgment as to the safety of any non-Lenovo alterations.
  • Page 10 ThinkSystem SD530 V3 System Configuration Guide viii...

  • Page 11: Chapter 1. Introduction

    Chapter 1. Introduction Lenovo ThinkSystem SD530 V3 (Types 7DD3 and 7DDA) is a dense and economical two-socket node in a 1U rack form factor. Combining the efficiency and density of blades with the value and simplicity of rack-based servers, SD530 V3 delivers a cost-efficient scaleout platform that is thermally designed to deliver maximum performance in the smallest footprint.
  • Page 12 The Lenovo XClarity Controller consolidates multiple management functions in a single chip on the server system board. Some of the features that are unique to the Lenovo XClarity Controller are enhanced performance, higher-resolution remote video, and expanded security options.

  • Page 13: Tech Tips

    The node provides a QR code on the system service label, which is on the node top cover, that you can scan using a QR code reader and scanner with a mobile device to get quick access to the Lenovo Service Information website.
  • Page 14 The list of current advisories is available at the following site: https://datacentersupport.lenovo.com/product_security/home ThinkSystem SD530 V3 System Configuration Guide...

  • Page 15: Specifications

    Specifications Summary of the features and specifications of the chassis and node. Depending on the model, some features might not be available, or some specifications might not apply. Refer to the below table for specifications categories and the content of each category. Node technical Node mechanical Environmental...

  • Page 16: Chassis Specifications

    Note: For the supported nodes for the D3 chassis, see . Node technical specifications Summary of the technical specifications of the node. Depending on the model, some features might not be available, or some specifications might not apply. ThinkSystem SD530 V3 System Configuration Guide...
  • Page 17 • Supports UPI v2.0 links at higher width (x96) and speed: up to 12.8, 14.4, 16 GT/s • Thermal Design Power (TDP): up to 350 watts For a list of supported processors, see: https://serverproven.lenovo.com Memory Memory See “Memory module installation rules and order” in the User Guide or Hardware Maintenance Guide for detailed information about memory configuration and setup.
  • Page 18 – PCIe expansion slot can support up to 75 watt PCIe adapter. • OCP module – One OCP module slot Graphics processing unit (GPU) Graphics processing unit (GPU) • Up to one 75-watt low-profile GPU For a list of supported GPUs, see: https://serverproven.lenovo.com ThinkSystem SD530 V3 System Configuration Guide...
  • Page 19 Integrated functions and I/O connectors Integrated functions • Lenovo XClarity Controller (XCC), which provides service processor control and monitoring functions, video controller, and remote keyboard, video, mouse, and remote drive capabilities. • One XCC system management port to connect to a systems-management network. This RJ-45 connector is dedicated to the Lenovo XClarity Controller functions and runs at 10/100/1000 Mbps speed.

  • Page 20: Node Mechanical Specifications

    “Deploy the operating system” on page 　 Node mechanical specifications Summary of the mechanical specifications of the ThinkSystem SD530 V3 node. Depending on the model, some features might not be available, or some specifications might not apply. Dimension ThinkSystem SD530 V3 node •...

  • Page 21: Environmental Specifications

    Lenovo recommends that you consult with qualified experts in this field to determine whether you are in compliance with the applicable regulations.
  • Page 22 RDIMMs – Up to two M.2 drives – Standard heat sink – One PCIe Ethernet adapter – One OCP module with 2 ports – Up to eight 96 GB RDIMMs – One GPU adapter ThinkSystem SD530 V3 System Configuration Guide...
  • Page 23 Table 3. Configurations with one processor, under 35°C (continued) Processor configuration Conditionally supported Commonly supported components components – One OCP module • Keep the ambient temperature to 30°C or lower with the following system configuration: Table 4. Configurations with one processor, under 30°C Processor configuration Conditionally supported Commonly supported...
  • Page 24 – One OCP module Environment Environment ThinkSystem SD530 V3 complies with ASHRAE Class A2 specifications. System performance may be impacted when operating temperature is outside AHSRAE A2 specification. Depending on the hardware configuration, SD530 V3 also complies with ASHRAE Class H1 specification. System performance may be impacted when operating temperature is outside ASHRAE H1 specification.
  • Page 25 If Lenovo determines that the levels of particulates or gases in your environment have caused damage to the device, Lenovo may condition provision of repair or replacement of devices or parts on implementation of appropriate remedial measures to mitigate such environmental contamination.
  • Page 26 ThinkSystem SD530 V3 System Configuration Guide...

  • Page 27: Management Options

    • Mobile application • Redfish API Usage and downloads https://pubs.lenovo.com/lxcc-overview/ Application that reports the XCC events to local OS system log. Interface • CLI application Lenovo XCC Logger Utility Usage and downloads • https://pubs.lenovo.com/lxcc-logger-linux/ • https://pubs.lenovo.com/lxcc-logger-windows/ Centralized interface for multi-server management.
  • Page 28 Important: Lenovo XClarity Provisioning Manager (LXPM) supported version varies by product. All versions of Lenovo XClarity Provisioning Manager are referred to as Lenovo XClarity Provisioning Manager and LXPM in this document, unless specified otherwise. To see the LXPM version supported by your server, go to https:// pubs.lenovo.com/lxpm-overview/...
  • Page 29 1. Most options can be updated through the Lenovo tools. Some options, such as GPU firmware or Omni- Path firmware require the use of supplier tools. 2. The server UEFI settings for option ROM must be set to Auto or UEFI to update firmware using Lenovo XClarity Administrator, Lenovo XClarity Essentials, or Lenovo XClarity Controller.
  • Page 30 ThinkSystem SD530 V3 System Configuration Guide...

  • Page 31: Chapter 2. Hardware Components

    Node tray 2 　 Node front view The following illustrations show the controls and connectors in the front view of the ThinkSystem SD530 V3 node. Depending on the specific configuration, some of the components or connectors might not be supported.
  • Page 32 Figure 2. Front view of the ThinkSystem SD530 V3 node Table 9. Components in the front view of the ThinkSystem SD530 V3 node E3.S drive bay External diagnostic handset connector Drive activity LED Front operator panel buttons and LEDs USB 3.2 Gen 1 (5 Gbps) connector...

  • Page 33: Rear View

    Front operator panel buttons and LEDs For more information about the front operator panel buttons and LEDs, see “Front operator panel LEDs” on page 　 USB 3.2 Gen 1 (5 Gbps) connector Connect a USB device, such as a mouse, keyboard, or other devices, to this connector. 　...

  • Page 34: Node Rear View

    “Power supply LED” on page Node rear view The following illustrations show the controls and connectors on the rear of the ThinkSystem SD530 V3 node. Depending on the specific configuration, some of the components or connectors might not be supported.
  • Page 35 PCIe slots Install PCIe adapters to the riser. Table 12. PCIe slots PCIe slot 1 PCI Express 5.0 x16, HH/HL, 75-watt OCP slot The system may support a 2-port or a 4-port OCP module for network connections. Port numbering are shown in the illustrations below.

  • Page 36: Top View

    In this mode, the USB port is always solely connected to Lenovo XClarity Controller. • Shared mode: owned by BMC In this mode, connection to the USB port is shared by the server and Lenovo XClarity Controller, while the port is switched to Lenovo XClarity Controller.

  • Page 37: Chassis Midplane

    Figure 7. Top view of SD530 V3 Table 13. Components on the top view E3.S drive cage Power bus bar Fans and fan cage E3.S drive backplane DIMMs 1-8 GPU air duct Processor 1 PCIe riser assembly Processor 2 Rear I/O module DIMMs 9-16 Power distribution board Depending on the specific configuration, the node might not come with this component.
  • Page 38 Notes: • The firmware of the chassis midplane can be updated via Lenovo XClarity Controller (XCC) and Lenovo XClarity Essentials OneCLI (LXCE OneCLI). Only the caretaker node can perform this update.

  • Page 39: System-Board Layout

    System-board layout The following sections provide information about the connectors, switches, and jumpers that are available on the system board. For more information about the LEDs that are available on the system board, see “System-board LEDs” on page System-board connectors The following illustrations show the internal connectors on the system board.

  • Page 40: System-Board Switches

    Normal (default) ME recovery Forces ME into recovery mode Normal (default) BMC force update Normal (default) Forces XCC boot Ignores Power Permission and allows FPGA power permission Normal (default) system to power on override ThinkSystem SD530 V3 System Configuration Guide...

  • Page 41: System Leds And Diagnostics Display

    SW13 switch block Table 16. SW13 switch block definition Usage description Switch Switch name number (Reserved) (Reserved) Normal (default) Debug Atscale Normal (default) Forces to enable the Atscale feature RTS (Real time clock) Normal (default) Clears CMOS data reset Normal (default) FPGA MFG mode Enables FPGA MFG mode Normal (default)

  • Page 42: Front Operator Panel Leds

    Use this system ID LED to visually locate the server. The LED can be changed to on, blinking, or off. You can use the Lenovo XClarity Controller or a remote management program to change the state of the system ID LED to assist in visually locating the server among other servers.

  • Page 43: Power Supply Led

    Press this button to force a non-maskable interrupt to the processor. A pen or the end of a straightened paper clip might be needed to press this button. This button can also be used to force a blue-screen memory dump (only when you are directed to do so by Lenovo Support). Power supply LED This topic provides information about various power supply LED status and corresponding action suggestions.

  • Page 44: Firmware And Rot Security Module Leds

    The following illustration shows the light-emitting diodes (LEDs) on the Firmware and RoT security module (ThinkSystem V3 Firmware and Root of Trust Security Module). Figure 13. LEDs on the firmware and RoT security module AP0 LED (Green) AP1 LED (Green) Fatal Error LED (Amber) ThinkSystem SD530 V3 System Configuration Guide...

  • Page 45: System-Board Leds

    Table 18. LEDs description Fatal heart- Error beat note Scenario AP0 LED AP1 LED Actions RoT security module fatal firmware failure Replace the firmware and RoT Blink security module. Blink No system power If the AC power is on, but the system board assembly does not have power, then: 1.

  • Page 46: Xcc System Management Port Leds

    Use this green LED to distinguish the network activity status: management port • Off: The server is disconnected from a LAN. (10/100/1000 • Green (blinking): The network is connected and active. Mbps RJ-45) Ethernet port activity LED ThinkSystem SD530 V3 System Configuration Guide...

  • Page 47: External Diagnostics Handset

    External Diagnostics Handset The External Diagnostics Handset is an external device that is connected to the server with a cable, and it allows quick access to system information such as errors, system status, firmware, network, and health information. Location of the External Diagnostics Handset Location Callouts The External Diagnostics Handset is connected to the...
  • Page 48 Option flow diagram The LCD panel displays various system information. Navigate through the options with the scroll keys. Depending on the model, the options and entries on the LCD display might be different. ThinkSystem SD530 V3 System Configuration Guide...
  • Page 49 Full menu list Following is the list of available options. Switch between an option and the subordinate information entries with the select button, and switch among options or information entries with the scroll buttons. Depending on the model, the options and entries on the LCD display might be different. Chapter 2 Hardware components...
  • Page 50 • Possible sources of the error CPU 1 Status: Configuration Error System VPD Information Sub Menu Example Machine Type: xxxx • Machine type and serial number Serial Num: xxxxxx • Universal Unique ID (UUID) Universal Unique ID: xxxxxxxxxxxxxxxxxxxxxxxxxxxx ThinkSystem SD530 V3 System Configuration Guide...
  • Page 51 System Firmware Sub Menu Example XCC Primary XCC Primary (Active) • Firmware level (status) Build: DVI399T • Build ID Version: 4.07 • Version number Date: 2020-04-07 • Release date XCC Backup XCC Backup (Active) • Firmware level (status) Build: D8BT05I •...
  • Page 52 • Set UEFI Memory Test This will request the BMC to reboot itself. • Request Virtual Reseat Hold √ for 3 seconds • Modify XCC Static IPv4 Address/Net mask/Gateway • Modify System Name • Generate/Download FFDC Service Data ThinkSystem SD530 V3 System Configuration Guide...

  • Page 53: Chapter 3. Parts List

    Tier 1 CRU at your request with no service agreement, you will be charged for the installation. • T2: Tier 2 customer replaceable unit (CRU). You may install a Tier 2 CRU yourself or request Lenovo to install it, at no additional charge, under the type of warranty service that is designated for your server.
  • Page 54 Chassis rear shipping brackets (left and right) Node tray front filler Chassis front EIA brackets (left and right) Node components Figure 16. Node components Description Type Description Type Top cover Processor OCP 3.0 module MicroSD card ThinkSystem SD530 V3 System Configuration Guide...

  • Page 55: Power Cords

    Several power cords are available, depending on the country and region where the server is installed. To view the power cords that are available for the server: 1. Go to: http://dcsc.lenovo.com/#/ 2. Click Preconfigured Model or Configure to order. 3. Enter the machine type and model for your server to display the configurator page.
  • Page 56 ThinkSystem SD530 V3 System Configuration Guide...

  • Page 57: Chapter 4. Unboxing And Setup

    They might be required to receive warranty service. Identify the system and access the Lenovo XClarity Controller This section contains instruction on how to identify the system and where to find the Lenovo XClarity Controller access information.
  • Page 58 Lenovo XClarity Controller network access label In addition, the Lenovo XClarity Controller network access label for the node can be found on the pull-out information tag located at the front of the node. This pull-out information tag also shows the bay numbers of the hot-swap drives.

  • Page 59: System Setup Checklist

    Figure 18. Lenovo XClarity Controller network access label on the pull-out information tab Service Label and QR code In addition, the System Service Label is located on the inside surface of the node cover, providing a quick response (QR) code for mobile access to service information. You can scan the QR code with a mobile device using a QR code reader application and get quick access to the Service Information web page.
  • Page 60 • You can press the power button. • The node can restart automatically after a power interruption. • The node can respond to remote power-on requests sent to the Lenovo XClarity Controller. Note: You can access the management processor interface to configure the system without powering on the system.
  • Page 61 Complete the following procedures to configure the system. For detailed instructions, refer to Chapter 5 “System configuration” on page 1. Set the network connection for the Lenovo XClarity Controller to the management network. 2. Update the firmware for the system, if necessary. 3. Configure the firmware for the system.
  • Page 62 ThinkSystem SD530 V3 System Configuration Guide...

  • Page 63: Chapter 5. System Configuration

    The following methods are available to set the network connection for the Lenovo XClarity Controller if you are not using DHCP: • If a monitor is attached to the server, you can use Lenovo XClarity Provisioning Manager to set the network connection.

  • Page 64: Set Usb Port For Lenovo Xclarity Controller

    ID button. To connect using the Lenovo XClarity Administrator Mobile app: 1. Connect the USB cable of your mobile device to the Lenovo XClarity Controller USB connector on the server. 2. On your mobile device, enable USB tethering.

  • Page 65: Update The Firmware

    Enterprise Server (SLES) operating system distributions. Machine-type-specific firmware-only Update Bundles (Service Packs) are also available. Firmware updating tools See the following table to determine the best Lenovo tool to use for installing and setting up the firmware: Chapter 5 System configuration...
  • Page 66 √ Lenovo XClarity devices (BoMC (BoMC Essentials Out-of- applica- applica- Bootable Media band tion) tion) Creator (BoMC) Off- Target In-band All I/O √ √ √ Lenovo XClarity devices Administrator Out-of- (LXCA) band Off- Target ThinkSystem SD530 V3 System Configuration Guide...
  • Page 67 4. Bare Metal Update (BMU) only. • Lenovo XClarity Provisioning Manager From Lenovo XClarity Provisioning Manager, you can update the Lenovo XClarity Controller firmware, the UEFI firmware, and the Lenovo XClarity Provisioning Manager software. Note: By default, the Lenovo XClarity Provisioning Manager Graphical User Interface is displayed when you start the server and press the key specified in the on-screen instructions.
  • Page 68 • Lenovo XClarity Controller If you need to install a specific update, you can use the Lenovo XClarity Controller interface for a specific server. Notes: – To perform an in-band update through Windows or Linux, the operating system driver must be installed and the Ethernet-over-USB (sometimes called LAN over USB) interface must be enabled.

  • Page 69: Configure The Firmware

    Several options are available to install and set up the firmware for the server. Important: Lenovo does not recommend setting option ROMs to Legacy, but you can conduct this setting if necessary. Note that this setting prevents UEFI drivers for the slot devices from loading, which may cause negative side effects to Lenovo software, such as LXCA, OneCLI, and XCC.

  • Page 70: Memory Module Configuration

    You can configure the management processor for the server through the Lenovo XClarity Controller Web interface, the command-line interface, or Redfish API. For information about configuring the server using Lenovo XClarity Controller, see: “Configuring the Server” section in the XCC documentation compatible with your server at https:// pubs.lenovo.com/lxcc-overview/...

  • Page 71: Deploy The Operating System

    OS logical drives or volumes. An introduction to RAID is available at the following Lenovo Press website: https://lenovopress.lenovo.com/lp0578-lenovo-raid-introduction Detailed information about RAID management tools and resources is available at the following Lenovo Press website: https://lenovopress.lenovo.com/lp0579-lenovo-raid-management-tools-and-resources Intel VROC...

  • Page 72: Back Up The Server Configuration

    Available tools: – Lenovo XClarity Administrator https://pubs.lenovo.com/lxca/compute_node_image_deployment – Lenovo XClarity Essentials OneCLI https://pubs.lenovo.com/lxce-onecli/onecli_r_uxspi_proxy_tool – Lenovo XClarity Integrator deployment pack for SCCM (for Windows operating system only) https://pubs.lenovo.com/lxci-deploypack-sccm/dpsccm_c_endtoend_deploy_scenario • Single-server Available tools: – Lenovo XClarity Provisioning Manager “OS Installation” section in the LXPM documentation compatible with your server at https:// pubs.lenovo.com/lxpm-overview/...

  • Page 73: Enable Intel On Demand

    Note: All processors in a system must be installed with identical Intel On Demand feature. Installation tool Intel On Demand can be installed via Lenovo XClarity Controller (XCC) and Lenovo XClarity Essentials OneCLI (LXCE OneCLI). After confirming that your processor supports Intel On Demand, you also need to make sure the XCC and LXCE OneCLI installed in your system supports installing Intel On Demand.

  • Page 74: Procedures For "Enabling Intel On Demand Features

    Authorization Code to acquire the Activation Key. https://fod.lenovo.com/lkms 5. In the website, input Machine Type, Machine serial number, and PPIN. 6. The website will generate the Activation Key. Download the Activation Key. ThinkSystem SD530 V3 System Configuration Guide...

  • Page 75: Procedures For "Transferring Intel On Demand Features

    Report” on page The State Report represents the current configuration state of the Intel On Demand capable processors. Lenovo accepts State Reports from customers to calibrate the current state of the Intel On Demand capable processors. 10. To see the features installed in a processor, see “Checking the Intel On Demand features installed in a...
  • Page 76 4. In the response JSON object, the ProcessorId field shows the ProtectedIdentificationNumber field, which is the PPIN info of the requested CPU. For example: "ProcessorId":{ "ProtectedIdentificationNumber":"1234567890xxxyyy" Reading PPIN via LXCE OneCLI Input the following command: OneCli.exe fod showppin -b XCC_USER:XCC_PASSW0RD@XCC_HOST ThinkSystem SD530 V3 System Configuration Guide...

  • Page 77: Installing Intel On Demand To Processor

    Install Intel On Demand features to the processor with the Activation Key downloaded from the https:// via XCC Web GUI, XCC REST API or LXCE OneCLI. fod.lenovo.com/lkms Use XCC Web GUI to install Intel On Demand 1. Open XCC Web GUI, go to BMC Configuration ➙ License ➙ On Demand Capabilities for Intel CPU ➙...

  • Page 78: Acquiring And Uploading Intel On Demand State Report

    OneCli.exe fod install --keyfile <key_file> If successfully installed, the response will show: Successfully install key Call Lenovo support if the response shows the following: Failed to install key Acquiring and uploading Intel On Demand State Report After completing enabling or transferring Intel On Demand, acquire and upload the State Report via XCC Web GUI, XCC REST API, and LXCE OneCLI.
  • Page 79 "title": "ExportStateReport", "target": "/redfish/v1/LicenseService/Licenses/CPUX_OnDemandCapability/Actions/Oem/LenovoLicense.ExportStateReport" In the following example, the response of the target field is the CPU 1 State Report API. Copy the CPU 1 State Report API. "Actions": { "Oem": { "#LenovoLicense.ExportStateReport": { "title": "ExportStateReport", "target": "/redfish/v1/LicenseService/Licenses/CPU1_OnDemandCapability/Actions/Oem/LenovoLicense.ExportStateReport" 3. Retrieve the State Report. a.

  • Page 80: Checking The Intel On Demand Features Installed In A Processor

    For example, to retrieve Intel On Demand features installed on CPU 1, see the following: GET https://bmc_ip/redfish/v1/LicenseService/Licenses/CPU1_OnDemandCapability 2. In the response JSON object, the FeatureList field contains the Intel On Demand features installed in this processor. ThinkSystem SD530 V3 System Configuration Guide...
  • Page 81 "Oem": { "Lenovo":{ "FeatureList":[] "@odata.type":"" Use LXCE OneCLI to check the Intel On Demand features installed in a processor 1. Check installed features with the following command: OneCli.exe fod report -b XCC_USER:XCC_PASSWORD@XCC_HOST 2. The output shows all license, including Intel On Demand features. For example: Intel On Demand Features Intel On Demand features are listed below.

  • Page 82: Enable Intel On Demand Troubleshooting

    The activation key format is invalid Check if you have uploaded the correct Activation Key file. If the error persists, contact Lenovo support. Invalid processor PPIN in Activation key Contact Lenovo support. The license was installed in the processor already You have already installed this activation key.

  • Page 83: Appendix A. Getting Help And Technical Assistance

    Appendix A. Getting help and technical assistance If you need help, service, or technical assistance or just want more information about Lenovo products, you will find a wide variety of sources available from Lenovo to assist you. On the World Wide Web, up-to-date information about Lenovo systems, optional devices, services, and support are available at: http://datacentersupport.lenovo.com...

  • Page 84: Collecting Service Data

    Collecting service data To clearly identify the root cause of a server issue or at the request of Lenovo Support, you might need collect service data that can be used for further analysis. Service data includes information such as event logs and hardware inventory.

  • Page 85: Contacting Support

    Support when certain serviceable events occur in Lenovo XClarity Administrator and the managed endpoints. You can choose to send diagnostic files to Lenovo Support using Call Home or to another service provider using SFTP. You can also manually collect diagnostic files, open a problem record, and send diagnostic files to the Lenovo Support.
  • Page 86 ThinkSystem SD530 V3 System Configuration Guide...

  • Page 87: Appendix B. Documents And Supports

    • UEFI Manual – UEFI setting introduction Support websites This section provides driver and firmware downloads and support resources. Support and downloads • Drivers and Software download website for ThinkSystem SD530 V3 – https://datacentersupport.lenovo.com/products/servers/thinksystem/sd530v3/7dd3/downloads/driver-list • Lenovo Data Center Forum –...
  • Page 88 • Operating System Installation Instructions – https://pubs.lenovo.com/thinksystem#os-installation • Submit an eTicket (service request) – https://support.lenovo.com/servicerequest • Subscribe to Lenovo Data Center Group product notifications (Stay up to date on firmware updates) – https://datacentersupport.lenovo.com/solutions/ht509500 ThinkSystem SD530 V3 System Configuration Guide...

  • Page 89: Appendix C. Notices

    Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.

  • Page 90: Trademarks

    (TBW). A device that has exceeded this limit might fail to respond to system-generated commands or might be incapable of being written to. Lenovo is not responsible for replacement of a device that has exceeded its maximum guaranteed number of program/erase cycles, as documented in the Official Published Specifications for the device.

  • Page 91: Taiwan Region Bsmi Rohs Declaration

    Taiwan Region BSMI RoHS declaration Taiwan import and export contact information Contacts are available for Taiwan import and export information. Appendix C. Notices...
  • Page 92 ThinkSystem SD530 V3 System Configuration Guide...

This manual is also suitable for:

7dd37dda

Table of Contents