Advertisement
Quick Links
thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instructions
1. sAFety
1.1.
generAl
dO nOt shine directly into your, another person's or an animal's eyes.
8
dO nOt allow children to use the torch.
8
dO nOt use the torch if you suspect that the battery or the torch casing is damaged.
8
dO nOt leave batteries in a discharged state. Before storage remove batteries.
8
1.2.
BAttery sAFety
WArning! To reduce the risk of burns or fire:
‰
dO nOt attempt to open the batteries.
8
dO nOt crush, puncture, short contacts or dispose of in fire or water.
8
dO nOt expose to temperatures above 60°C (140°F).
8
Replace only with the batteries designed for this product.
9
Recycle or dispose of used batteries as stipulated by local regulation.
9
If the electrolyte in the batteries gets on your skin, rinse thoroughly with water. If it gets in your eyes, rinse thoroughly with cool water
9
and seek immediate medical attention.
2. intrOductiOn
osram P8 LED produces 270 lumens. Flexible head bends and holds position to allow bright illumination in confined spaces. Adjustable focus
from spotlight to wide area by a push/pull action of the head. Features a magnet in the end for hands free use. Powered by 3 x AAA batteries
(not supplied).
3. sPeciFicAtiOn
Model no: ................................................................. led021
Battery: ............................... 3 x AAA Batteries (Not Included)
led Qty: ........................................................ osram P8 led
lumen output: ............................................................. 270lm
nett Weight: ................................................................... 262g
operating Time: .............................................................. 4hrs
Range: .......................................................................... 100m
4. OPerAtiOn
4.1.
Unscrew the bottom of the body of pen light to load 1.5v
AAA battery with "+" polarity inward.
4.2.
Replace the end cap on bottom of pen light.
4.3.
Press the button at the top of the body to turn XPe led on
(fig.2).
4.4.
Press again to turn XPE LED off (fig.2).
4.5.
To change the width of the beam, slide the lens backwards and
forwards to adjust from a wide beam to a focused beam (fig.1).
5. mAintenAnce
5.1.
Keep the torch clean by wiping with a damp cloth.
5.2.
Remove batteries if not being used for a long period of time.
5.3.
Store torch and batteries in a dry childproof area.
© Jack Sealey limited
Aluminium mAgnetic Flexi-HeAd ligHt
270lm OsrAm P8 led
led021
Model no:
fig.2
Original Language Version
On/Off
led021 Issue 1 28/01/19
fig.1
Advertisement
Related Manuals for Sealey LED021
Summary of Contents for Sealey LED021
- Page 1 Model no: thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 BAttery remOvAl: see sectiOn 4 Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack Sealey ltd Batteries Producer Registration number (BPRn) is BPRn00705.