Memory; Removing The Memory Module - Dell OptiPlex Small Form Factor Plus 7020 Owner's Manual
Hide thumbs
Also See for OptiPlex Small Form Factor Plus 7020:
- Owner's manual (100 pages) ,
- Owner's manual (159 pages)
Table of Contents
Advertisement
Next steps
1. Install the
disk-drive
cage.
2. Install the
3.5-inch hard
3. Install the
front
bezel.
4. Install the
side
cover.
5. Follow the procedure in
Memory
Removing the memory module
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
4. Remove the
3.5-inch hard
5. Remove the
disk-drive
About this task
The following images indicate the location of the memory modules and provide a visual representation of the removal procedure.
Figure 15. Removing the memory
Steps
1. Use your fingertips to carefully spread apart the securing-clips on each end of the memory-module slot (DIMM1, DIMM2,
DIMM3 or DIMM4, whichever is applicable) .
2. Grasp the memory module near the securing clip, and then gently ease the memory module out of the memory-module slot.
CAUTION:
To prevent damage to the memory module, hold the memory module by the edges. Do not touch
the components on the memory module.
NOTE:
If the memory module is difficult to remove, gently ease the memory module back and forth to remove it from
the slot.
drive, if applicable.
After working inside your
Before working inside your
drive, if applicable.
cage.
computer.
computer.
Removing and installing Customer Replaceable Units (CRUs)
53
- Quick Links:
- Internal Slots
Hide quick links:
Advertisement
Table of Contents
