IC Card Reader BOX-D1
Points to Note at Installation
• When installing this equipment, the Card Reader (sales company's option) is required.
• This equipment cannot be used in combination with IC Card Reader and Copy Card Reader.
• When installing this equipment and the finisher at the same time, be sure to install this equipment before installing the optional
Harness Cover of the finisher.
• If the finisher has already been installed, be sure to remove the optional Harness Cover. For the procedure to remove the
optional Harness Cover, refer to "Removing the Equipment" in the chapter "Parts Replacement and Cleaning Procedure" in
the Service Manual for Staple Finisher-S1/Z1.
• The work to be performed is the same for the printer model although the illustration of the machine is of a model with a reader.
Installation Outline Drawing
123
3. Host Machine Options