Table of Contents
Advertisement
Installing the power button
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image indicates the location of the power button and provides a visual representation of the installation
procedure.
Figure 27. Installing the power button
Steps
1. Slide the power-button cable through the slot on the front of the chassis.
2. Align the tabs on the side of the power button with the cutouts on the slot in the chassis.
3. While pressing the tabs on the power button, insert it through the slot on the chassis and then secure it into place.
4. Connect the power-button cable to the system board.
Next steps
1. Install the
hard
drive.
2. Install the
front
cover.
3. Install the
left-side
cover.
4. Follow the procedure in
50
Removing and installing Customer Replaceable Units (CRUs)
After working inside your
computer.
Advertisement
Table of Contents
