Table of Contents
Advertisement
Steps
1. Align the notch on the memory with the tab on the memory-module slot.
2. Slide the memory firmly into the slot and press the memory module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
3. Close the memory module door and press down firmly till it clicks in place.
Next steps
1. Install the
hard-drive and optical-drive
2. Install the
3.5-inch
hard-drive.
3. Install the
2.5-inch
hard-drive.
4. Install the
front
bezel.
5. Install the
side
cover.
6. Follow the procedure in
Bay-support bracket
Removing the Bay support bracket
Prerequisites
1. Follow the procedure in
cage.
after working inside your
before working inside your
computer.
computer.
Removing and installing components
41
Advertisement
Table of Contents
