Table of Contents
Advertisement
About this task
The following image indicates the location of the WLAN antenna and provides a visual representation of the installation
procedure.
Steps
1. Route the antenna cables through the routing guides on the chassis.
2. Align and place the screw holes on the WLAN antenna with the screw holes on the chassis.
3. Replace the two screws (M3x3) to secure the WLAN antenna to the chassis.
Next steps
1. Install the
hard-drive and optical-drive
2. Install the
WLAN
card.
3. Install the
3.5-inch
hard-drive.
4. Install the
2.5-inch
hard-drive.
5. Install the
front
bezel.
6. Install the
side
cover.
7. Follow the procedure in
Coin-cell battery
Removing the coin-cell battery
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
4. Remove the
2.5-inch
cage.
after working inside your
before working inside your
hard-drive.
computer.
computer.
Removing and installing components
37
Advertisement
Table of Contents
