Table of Contents
Advertisement
Network Setting
Conguring the IP Address Using ARP and PING
Commands
This topic describes how to congure the IP address using ARP and PING commands.
To use the ARP and PING commands, you will need to know the printer's MAC address. You can conrm
the MAC address on the Control Panel.
1.
Check the printer's MAC address.
You can conrm the MAC address on the Control Panel as follows:
1.
Press the Menu button to display MAIN MENU.
2.
Press ▲ or ▼ to select Interface Setup, and then press the ► button.
3.
Press ▲ or ▼ to select Ethernet Driver, and then press the ► button.
4.
Press ▲ or ▼ to select MAC Address, and then press the ► button.
You can also print information on the printer status, which includes the MAC address, as follows:
1.
Press the Menu button to display MAIN MENU.
2.
Press ▲ or ▼ to select Test Print, and then press the ► button.
3.
Press ▲ or ▼ to select Status Print, and then press the ► button.
4.
Press ▲ or ▼ to select Yes, and then press the OK button.
The MAC address is indicated in the printer status information in the following location.
2.
In Windows, open a command prompt or MS-DOS prompt, or in Mac OS X, start Terminal.
3.
Execute the following command to add entries to the ARP table for managing IP addresses
and corresponding MAC addresses.
arp -s [IP address] [the printer's MAC address you have veried]
Example: arp -s xxx.xxx.xxx.xxx 00-00-85-xx-xx-xx
Note
•
In Mac OS X when using Terminal, enter the arp command in the format "arp -s xxx.xxx.xxx.xxx
00:00:85:xx:xx:xx." For details, refer to the help le for the command line.
616 Network Setting
Advertisement
Table of Contents
