Manually installing the monitor driver …………………………………………………………………… 3-4 Service information ………………………………………………………………………………………..3-7 …………………………………………..…………... Appendix A. Service and Support Online technical support ………………………………………………………………………..……………. A-1 Telephone technical support ………………………………………………………………………..………... A-1 Worldwide telephone list …….…………………………………………………………………….……… A-1 ………………………………………………………………….…… Appendix B. Notices Trademarks …………………………………………………………………………………………………… B-2 Copyright Lenovo 2008.
Safety and Maintenance Guidelines Important Safety Information The power cord is designed for use with your monitor. To use a different cord, use only a power source and connection compatible with this monitor. WARNING: Always connect your monitor, the computer, and other equipment to a grounded (earthed) power outlet.
Flat Panel Monitor ● Power Cord ● Analog Interface Cable- Attached to monitor ● Digital Interface Cable ● Cable Wrapper ● Cable Cover ● Note: To attach a VESA mount, please see “Detaching the monitor stand” on page 2-7. Copyright Lenovo 2008.
Product overview This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot. Types of adjustments Tilt Please see the illustration below for an example of the tilt range. Swivel With the built-in pedestal, you can tilt and swivel the monitor for the most comfortable viewing angle.
Monitor Pivot - Adjust height to the top position before rotation the monitor. - Rotate clockwise until the monitor stops at 90°. User controls Your monitor has controls on the front which are used to adjust the display. For information on how to use these controls, please see “Adjusting your monitor image ”...
Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monitor (in the lower right corner). Please follow the instructions that came with the cable lock to attach it. Setting up your monitor This section provides information to help you set up your monitor.
Page 10
Connect the analog signal cable to the D-SUB connector of the monitor and the other end on the back of the computer. Plug the monitor power cord and the computer cord into grounded electrical outlets. Note: A certified power supply cord has to be used with this equipment. The relevant national installation and/or equipment regulations shall be considered.
Page 11
Rotate the head of the monitor into portrait view. Place the cables through the Main Clip. Then fasten the clip. L2240p Wide Flat Panel Monitor User’s Guide...
Page 12
Wrap the Cable Wrapper around the cables. Remove the four rubbers from the stand. Chapter 1. Getting started...
Page 13
Replace the Cable Cover. 10. Power on the monitor and the computer. 11. To install the monitor driver, insert the Reference and Driver CD, click Install driver, and follow the on-screen instructions. L2240p Wide Flat Panel Monitor User’s Guide...
Please take a few moments to ® register your product and provide us with information that will help Lenovo to better serve you in the future. Your feedback is valuable to us in developing products and services that are important to you, as well as in developing better ways to communicate with you.
For more detailed information on any of these topics, visit the Healthy Computing Web site at: http://www.lenovo.com/healthycomputing Arranging your work area Use a work surface of appropriate height and available working area to allow you to work in comfort.
Accessibility information Lenovo is committed to providing greater access to information and technology to people with disabilities. With assistive technologies, users can access information in the way most appropriate to their disability. Some of these technologies are already provided in your operating system;...
Adjusting your monitor image This section describes the user control features used to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On Screen Display (OSD) is not displayed. Note: The direct access controls are blue. Table 2-1.
Page 18
Table 2-2. OSD functions Controls and Controls and OSD Icon on Main Submenu Descirption Adjustments Adjustments Menu (Analog) (Digital) Same as Analog Adjusts overall brightness Brightness Brightness/ Contrast Adjusts difference between Contrast light and dark areas Control Locked- Moves the image left or Horizontal Position not required for right.
Page 19
Table 2-2. OSD functions Controls and Controls and OSD Icon on Main Submenu Descirption Adjustments Adjustments Menu (Analog) (Digital) This monitor can accept video signals through two Same as Analog different connectors. Most desktop computers use Input Signal a D-SUB connector. Select digital among OSD Controls when you use DVI connector.
Selecting a supported display mode The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes. The image size, position and shape might change when the display mode changes. This is normal and the image can be readjusted using automatic image setup and the image controls.
Image rotation Before rotating the monitor, you should set-up your computer to rotate the image. Rotating the image may require special rotation software or you may find that your computer is preloaded with video graphic drivers that allows image rotation. Check the Graphic Properties setting on your computer to see if this feature is available.
(VESA Standard modes between noted ranges) Native Resolution 1680 x 1050 at 60 Hz Operating 0° to 40°C (32° to 104° F) Temperature Storage -20° to 60°C (-4° to 140° F) Shipping -20° to 60°C (-4° to 140° F) Copyright Lenovo 2008.
5% to 95% Troubleshooting If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem. Table3-2.Troubleshooting...
Table3-2.Troubleshooting(continued) Problem Possible cause Suggested action Reference Screen is blank The monitor is in Press any key on the “Understanding power ● and power Standby/Suspen keyboard or move the management” on page indicator is d mode mouse to restore steady amber or operation.
Installing the monitor driver in Windows Vista To install the device driver in Microsoft® Windows Vista, do the following: Note: You must download files from the Lenovo Monitor CD to use the Plug and Play feature in Windows Vista. Turn off the computer and all attached devices.
Color Matching Profiles. Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 1680x 1050 at a refresh rate of 60 Hz, or 640x480 at a refresh rate of 60Hz.
Getting further help If you still can’t solve your problem, please contact the Customer Support Center. For more information on contacting the Customer Support Center, please see Appendix A, “Service and Support,” on page A-1. Service information Product numbers The product number for your monitor is located on the side of the display bezel as shown below.
Service parts The following parts are for use by Lenovo service, or Lenovo authorized dealers, To support the customer warranty. Parts are for service use only. The table below shows information for model 4422-Hx6. Table 3-3. List of service parts...
Telephone technical support Installation and configuration support through the Customer Support Center will be withdrawn or made available for a fee, at Lenovo’s discretion, 90 days after the option has been withdrawn from marketing, Additional support offerings, including step-by-step installation assistance, are available for a nominal fee.
Page 30
Country or Region Telephone Number Africa Africa: +44 (0)1475-555-055 South Africa: +27-11-3028888 and 0800110756 Central Africa: Contact the nearest Lenovo service provider Argentina 0800-288-5366 (Spanish) Australia 131-426 (English) Austria Up and running support: 01-24592-5901 Warranty service and support: 01-211-454-610 (German)
Page 31
Country or Region Telephone Number Israel Givat Shmuel Service Center: + 972-3-531-3900 Haifa Service Center: +972-4-849-4608(Herbrew, English) Italy Up and running support: 02-7031-6101 Warranty service and support: +39-800-820094 (Italian) Japan Toll Free: 0120-20-5550 International: +81-46-266-4716 The above numbers will be answered with a Japanese language voice prompt.
Page 32
Country or Region Telephone Number Turkey 00800-4463-2041 (Turkish) United Kingdom Up and running support: 01475-555-055 Warranty support: 08705-500-900 (English) United States 1-800-426-7378 (English) Uruguay 000-411-005-6649 (Spanish) Venezuela 0-800-100-5722 (Spanish) Vietnam For northern area and Hanoi:84-4-843-6675 For southern area and Ho Chi Minh City: 84-8-829-5160 (English, Vietnamese) L2240p Wide Flat Panel Monitor User’s Guide...
Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment. Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: Lenovo ThinkCentre ThinkPad ENERGY STAR and the ENERGY STAR logo are registered US trademarks.