NEC P401 - MultiSync - 40" LCD Flat Panel Display Installation Manual
40” lcd display
Hide thumbs
Also See for P401 - MultiSync - 40" LCD Flat Panel Display:
- User manual (43 pages) ,
- Installation and assembly manual (12 pages) ,
- Installation manual (9 pages)
Advertisement
Quick Links
P401 Installation Guide
40" LCD Display
Product Description and Notes
Tilt Angle and Rotation
Ventilation Requirements
Display Dimensions
Front, Top & Right Side
Rear & Bottom
Display Dimensions w/Optional Speakers and Stand
Optional Table Top Stand Dimensions
Optional Speaker Dimensions
Dimensions with Optional Wall Mount
Dimensions with Optional Wall Mount (WMK-3260L)
Dimensions with Optional Wall Mount (WMK-3257)
Input Panels
Control Codes
Type:
Resolution:
Aspect Ratio:
FCC:
Power Consumption:
BTU's:
NOTES:
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
•
intended to be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
•
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
•
to fill the screen using the menus (see "Aspect Modes" in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
•
Below are the maximum angles that the monitor can be tilted in the landscape position only.
Landscape 20deg
Max. 20 deg
www.necdisplay.com
LCD Display
1920 x 1080
16:9
Class B
175W (typ)
597.13 BTU/hour
NEC Display Solutions of America, Inc.
Page 1
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 8
Page 9
Page 10
Page 11
Screen Surface:
Dimensions without stand: 36.2"(W) x 21.0"(H) x 5.5"(D)
Dimensions with stand:
Weight without stand:
Weight with stand:
Rev 1.3
Anti-Reflective
36.2"(W) x 22.4"(H) x 13.0" (D)
55.8 lbs / 25.2 kg
52.9 lbs / 24.0 kg
P401
Page 1 of 11
Advertisement
Related Manuals for NEC P401 - MultiSync - 40" LCD Flat Panel Display
Summary of Contents for NEC P401 - MultiSync - 40" LCD Flat Panel Display
- Page 1 NEC Display Solutions of America, Inc. P401 Installation Guide 40” LCD Display Rev 1.3 Product Description and Notes Page 1 Tilt Angle and Rotation Page 1 Ventilation Requirements Page 2 Display Dimensions Front, Top & Right Side Page 3 Rear & Bottom...
- Page 2 The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and recommendations.
- Page 3 NEC Display Solutions of America, Inc. P401 Installation Guide 40” LCD Display Rev 1.3 www.necdisplay.com P401 Page 3 of 11...
- Page 4 NEC Display Solutions of America, Inc. P401 Installation Guide 40” LCD Display Rev 1.3 www.necdisplay.com P401 Page 4 of 11...
- Page 5 NEC Display Solutions of America, Inc. P401 Installation Guide 40” LCD Display Rev 1.3 www.necdisplay.com P401 Page 5 of 11...
- Page 6 NEC Display Solutions of America, Inc. P401 Installation Guide 40” LCD Display Rev 1.3 www.necdisplay.com P401 Page 6 of 11...
- Page 7 NEC Display Solutions of America, Inc. P401 Installation Guide 40” LCD Display Rev 1.3 www.necdisplay.com P401 Page 7 of 11...
- Page 8 NEC Display Solutions of America, Inc. P401 Installation Guide 40” LCD Display Rev 1.3 www.necdisplay.com P401 Page 8 of 11...
- Page 9 NEC Display Solutions of America, Inc. P401 Installation Guide 40” LCD Display Rev 1.3 NOTE: Vertical rails on WMK-3257 are shown with 400mm extension rail attached. Extension rails included with mount. www.necdisplay.com P401 Page 9 of 11...
- Page 10 NEC Display Solutions of America, Inc. P401 Installation Guide 40” LCD Display Rev 1.3 Bottom: Side: www.necdisplay.com P401 Page 10 of 11...
- Page 11 01 30 41 30 45 30 41 02 30 30 30 32 30 30 30 31 03 77 0D AUTO 01 30 41 30 45 30 41 02 30 30 30 32 30 30 30 32 03 74 0D NOTE: Contact your NEC rep for codes not listed. NOTE: Use a cross/reverse/null modem cable. Interface:...