Nokia N80 Internet Edition User Manual page 101
Nokia n80ie user guide in english
Hide thumbs
Also See for N80 Internet Edition:
- User manual (377 pages) ,
- Manual (128 pages) ,
- Aplicaciones adicionales manual (33 pages)
Table of Contents
Advertisement
Authentication
authentication type between your device and the wireless
LAN access point device.
WEP key
settings—Enter
key),
WEP key format (ASCII
key
(the WEP key data in the selected format).
Security settings for
WPA
mode—Select the means of authentication:
use an extensible authentication protocol (EAP) plug-in, or
Pre-shared key
appropriate settings:
EAP plug-in settings
your service provider instructs.
Pre-shared key
password. The same password must be entered on the
wireless LAN access point device.
TKIP encryption
Temporal Key Integrity Protocol (TKIP) is used.
Homepage—Define a home page.
Select
Options
>
following:
IPv4
settings:
Phone IP address
device),
Subnet mask
gateway
(the gateway), and
100
type—Select
Open
or
Shared
WEP encryption
or Hexadecimal), and
802.1x
and WPA/WPA2:
to use a password. Complete the
(only for EAP)—Enter the settings as
(only for
Pre-shared
key)—Enter a
(only for WPA/WPA2)—Select whether
Advanced settings
and from the
(the IP address of your
(the subnet IP address),
DNS
address—enter the IP
for the
addresses of the primary and secondary DNS server.
Contact your Internet service provider for these addresses.
IPv6 settings
(length of the
known, or
WEP
Ad-hoc channel
number (1-11) manually, select
Proxy serv.
EAP
to
server.
Proxy port
Packet data
The packet data settings affect all access points using a
packet data connection.
Packet data
are in a network that supports packet data, the device
registers to the packet data network. Starting an active
packet data connection (for example, to send and receive
e-mail) is quicker. If there is no packet data coverage, the
device periodically tries to establish a packet data
connection. If you select
packet data connection only if you start an application or
action that needs it.
Access
point—The access point name is needed to use your
device as a packet data modem to your computer.
Default
>
DNS
address—Select Automatic,
User
defined.
(only for Ad-hoc)—To enter a channel
User
defined.
address—Enter the address for the proxy
number—Enter the proxy port number.
conn.—If you select
When available
When
needed, the device uses a
Well-
and you
Advertisement
Table of Contents
