Saving the captured image may take longer if you change
the zoom, lighting, or color settings.
To select a shooting mode, select
setup
>
Shooting
The camera indicators show the following:
• The device memory (
indicators (1) show where images are saved.
• The images indicator (2) estimates how many images,
depending on the selected image quality, fit in the
remaining memory of your device or the memory card
(if inserted).
• The shooting mode indicator (3) shows the active
shooting mode.
• The flash indicator (4)
shows if the flash is
set to
Automatic
(
),
Red eye redu.
(
),
On
(
), or
(
).
• The image resolution
indicator (5) indicates
the quality of the
picture.
• The sequence mode indicator (6) shows that the
sequence mode is active. See 'Take pictures in a
sequence', p. 23.
22
Options
>
Image
mode. See 'Shooting modes', p. 24.
) and memory card (
Off
• The self-timer indicator (7) shows that the self-timer is
activated. See 'You in the picture—self-timer', p. 23.
Shortcuts are as follows:
• Scroll up and down to zoom in and zoom out. The zoom
indicator, which appears on the side pane, shows the
zoom level.
)
• Scroll left to enter the
settings—Adjust color and lighting', p. 24.
When taking a picture, note the following:
• Use both hands to keep the camera still.
• To take images or record video in different
environments, use the proper shooting mode for each
environment.
• The quality of a zoomed picture is lower than that of a
nonzoomed picture.
• The camera goes into the battery saving mode if there
are no keypresses for a moment. To continue taking
pictures, press
After the image is taken:
• If you do not want to keep the image, press
select
Options
• To send the image
Bluetooth, or
Options
> Send. For more information, see
'Messaging', p. 44 and 'Bluetooth connectivity', p. 81.
This option is not available during an active call.
Image setup
settings. See 'Setup
.
> Delete.
Via
multimedia,
Via
e-mail,
Via
infrared, press
, or select
, or
Via