Lenovo ThinkServer TS430 User Manual page 108
Machine type: 0387, 0388, 0389, 0390, 0391, 0392, 0393 and 0441
Hide thumbs
Also See for ThinkServer TS430:
- Hardware maintenance manual (264 pages) ,
- Benutzerhandbuch (234 pages) ,
- Manual d'utilisation (230 pages)
Table of Contents
Advertisement
Notes:
1. To optimize system performance, make sure that you consider and follow the memory module
installation rules when performing the operation. See "Memory module installation rules" on page 94.
2. Use any documentation that comes with the memory module and follow those instructions in addition to
the instructions in this topic.
To install a memory module, do the following:
1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all
power cords from electrical outlets and disconnect all cables that are connected to the server.
2. Remove the server cover. See "Removing the server cover" on page 87.
3. Lay the server on its side for easier operation.
4. Locate the memory slots on the system board. See "System board components" on page 45.
5. Remove any parts or disconnect any cables that might prevent your access to the memory slots.
6. Open the retaining clips of the appropriate memory slot. See "Memory module installation rules" on
page 94 for the installation sequence information.
Figure 43. Opening the retaining clips of the memory slots
7. Touch the static-protective package that contains the new memory module to any unpainted surface on
the outside of the server. Then, take the new memory module out of the package.
Note: Carefully handle the memory module by its edges.
96
ThinkServer TS430 User Guide
Advertisement
Table of Contents
Troubleshooting
