Figure 15. Removing The Palmrest Assembly Top Screws - Dell Latitude LS Service Manual
Hide thumbs
Also See for Latitude LS:
- User manual (178 pages) ,
- System information manual (110 pages) ,
- Fan removal and replacement (36 pages)
Table of Contents
Advertisement
Figure 15. Removing the Palmrest Assembly Top Screws
8. Remove the three silver M2 x 6-mm screws in the keyboard-assembly
9. Disconnect the status lights flex cable from the ZIF connector on the
10. Disconnect the touch pad flex cable from the ZIF connector on the system
11. Carefully remove the palmrest assembly from the bottom assembly.
To replace the palmrest assembly, perform the following steps:
1. Place the palmrest assembly on the bottom assembly.
2. Reinstall the three silver M2 x 6-mm screws in the keyboard-assembly area
support.dell.com
M2 x 6-mm screws
(3 silver)
palmrest
assembly
area that secure the middle of the palmrest assembly to the bottom case
(see Figure 15).
system board.
board.
that secure the middle of the palmrest assembly to the bottom-case
assembly (see Figure 15).
Dell Latitude LS Portable Computers Service Manual
M2 x 4-mm screws (4 black)
21
Advertisement
Table of Contents
