1 back of display planel
2 pull tab on bottom flex-cable connector
3 top flex-cable connector 4 metal clamps (2)
Replacing the Display Panel
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
1. Follow the instructions in
Before You
2. Connect the top flex-cable connector to the display connector.
3. Connect the bottom flex-cable connector to the inverter connector.
4. Align the screw holes on the display panel with the corresponding screw holes and guide pins on the top cover.
5. With the top of the display panel raised slightly, slide the camera/microphone cable into the camera/microphone connector, then rotate the
camera/microphone connector latch downward to secure the cable.
6. Gently lower the display panel into place.
7. Replace the eight M2 x 3-mm screws (four on each side of the display panel) to secure the display panel to the display cover.
8. Replace the display bezel (see
9. Replace the display assembly (see
10. Replace the keyboard (see
11. Replace the hinge cover (see
Display Latch
Removing the Display Latch
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
1. Follow the instructions in
Before You
2. Remove the hinge cover (see
3. Remove the keyboard (see
4. Remove the display assembly (see
5. Remove the display bezel (see
Begin.
Replacing the Display
Bezel).
Replacing the Display
Assembly).
Replacing the
Keyboard).
Replacing the Hinge
Cover).
Begin.
Removing the Hinge
Cover).
Removing the
Keyboard).
Removing the Display
Assembly).
Removing the Display
Bezel).