free stats
NEC Express5800 1160Xd User Manual
  1. Manuals
  2. Brands
  3. NEC Manuals
  4. Server
  5. NEC Express5800 Series
  6. User manual
NEC Express5800 1160Xd User Manual

NEC Express5800 1160Xd User Manual

Hide thumbs Also See for Express5800 1160Xd:
Table of Contents

Advertisement

Quick Links

Download this manual
E
5800/1160Xd/1320Xd
XPRESS
U s e r ' s G u i d e

Advertisement

Table of Contents
loading

Related Manuals for NEC Express5800 1160Xd

Summary of Contents for NEC Express5800 1160Xd

  • Page 1 5800/1160Xd/1320Xd XPRESS U s e r ’ s G u i d e...
  • Page 3 NEC Solutions (America), Inc. To allow for design and specification improvements, the information in this document is subject to change at any time, without notice.

  • Page 5: Table Of Contents

    Contents Proprietary Notice Using This Guide Text Conventions ....................... viii Related Documents ......................ix Safety Notices ........................x Safety Notices for Users Outside of the U.S.A. and Canada .......... xi Care and Handling....................... xii 1 System Overview Overview ..........................1-2 System Features........................
  • Page 6 Booting the OS .........................2-12 OS Boot from Boot Manager ..................2-12 OS Boot from the EFI Boot Manager................2-12 EFI Shell........................2-13 EFI Shell Commands....................2-14 OS Boot from EFI Shell ....................2-16 Notes for OS Installation.....................2-17 EFI Device Path......................2-17 Checking Failure ......................2-18 Using the DVD-ROM Drive.....................2-19 Inserting a Disc in the DVD-ROM Drive..............2-19 Removing a Disc from the DVD-ROM Drive.............2-19 Using an Optional Tape Drive..................2-20...
  • Page 7 4 BIOS Setup Setup Overview........................4-2 What is Setup? ......................4-2 When You Should Change the Settings ................ 4-2 Some Setting Errors Exist ..................4-2 Settings of CMOS and/or NVRAM Are Cleared..........4-3 Adding or Deleting a Boot Device................ 4-3 The BIOS Version Has Changed ................
  • Page 8 5 I/O Board Installation Identifying PCI Slots ......................5-2 Selecting a Slot ........................5-5 Installing a Board in the PCIX Unit ...................5-6 6 Problem Solving Solving Simple Problems ....................6-2 Troubleshooting the System ....................6-4 A Technical Specifications Main Cabinet ........................A-2 DVD-ROM Drive ......................A-4 Tape Drive .........................A-5 FDD ...........................A-6 B Memory Upgrades...

  • Page 9: Using This Guide

    Using This Guide This User’s Guide provides a quick reference to information about your server system. Its goal is to familiarize you with your system and the tasks necessary for system setup and operation. This guide contains the following information: Chapter 1, “System Overview,”...

  • Page 10: Text Conventions

    Text Conventions This guide uses the following text conventions. Warnings, cautions, and notes have the following meanings: WARNING Warnings alert you to situations that could result in serious personal injury or loss of life. ! CAUTION Cautions indicate situations that can damage the system hardware or software. Note: Notes give important information about the material being described.

  • Page 11: Related Documents

    ! CAUTION The Express5800/1160Xd/1320Xd server requires installation by qualified personnel such as an NEC technician and system administrator. ServerCare Guide The ServerCare Guide contains information about NEC’s warranty and server registration. Using This Guide ix...

  • Page 12: Safety Notices

    Safety Notices WARNING To avoid a risk of injuries, installation should be performed by trained technical personnel. Your server is equipped with a front stabilizer. Engage the front stabilizer during installation. For stability and to distribute the weight, also attach side stabilizers. Otherwise, the rack may topple over and cause injuries.

  • Page 13: Safety Notices For Users Outside Of The U.s.a. And Canada

    WARNING Some locations within the server have high voltage and therefore are very dangerous. To avoid risk of electric shock, turn off all server power and disconnect power cables before working inside the server unit. The main power of your server is turned off by turning off the power source to the server or removing the power cable.

  • Page 14: Care And Handling

    Care and Handling Use the following guidelines to properly handle and care for your system. Protect the system from extremely low or high temperatures. Let the system warm (or cool) to room temperature before using it. Keep the system away from magnetic forces. Keep the system dry.

  • Page 15: System Overview

    System Overview Overview System Features System Configurations Main Components System Functions Expansion Security...
  • Page 16 High-speed processing and high scalability High-speed processing is realized through a combination of the new Intel CPU and NEC crossbar switch and high-speed memory access technologies. Supporting up to 32 CPUs (32-way model) and employing the advanced PCI-X bus to connect peripheral and network devices, the Express5800/1000 series server can be configured with up to 112 I/O slots (32-way model), demonstrating the high scalability ideal for large-scale configurations.
  • Page 17 High reliability and availability Many hardware components, such as the clock, power, fan, and service processor, allow redundancy, and the CPU/memory cell board and I/O card hardware are hot-swap compliant. Easy system recovery is possible even at the time of failure. System Features The Express5800/1000 series servers feature: ®...
  • Page 18 Up to two Power Bay Units can be installed in the Main Cabinet. Up to 12 Distributed Power Supply (DPS) modules can be installed. When a 2N redundant system is configured, up to 3 Power Bay Units can be installed. In this case, the primary power is supplied from two AC power distribution units.

  • Page 19: Front View

    Front View Rear View Front Stabilizer Handle Front Fans Power Bay Units Front Cell Boards Base or Core PCIX Units XBC Boards UUID Label Rear Fans Clock Boards Rear Cell Boards iSP Boards Note: Maximum configuration shown. Figure 1-2. 16-Way Server Configuration System Overview 1-5...
  • Page 20 Front View Rear View Front Stabilizer Handle Front Fans Power Bay Units Front Cell Boards Base or Core PCIX Units XBC Boards Clock Boards Rear Fans iSP Boards Rear Cell Boards UUID Label Note: Maximum configuration shown. Figure 1-3. 32-Way Server Configuration 1-6 System Overview...
  • Page 21 Front View Rear View Front Stabilizer Handle Power Bay Units Base or Core PCIX Units Note: Maximum Configuration shown. Figure 1-4. I/O Expansion Cabinet Configuration System Overview 1-7...
  • Page 22 PCI Expansion Slots Bay for DAT Tape Drive or USB FDD PCI Expansion Slot Hard Disk Drive Bays Cover (behind panel) DVD-ROM Drive (Core Unit) Figure 1-5. PCIX Unit Features 1-8 System Overview...
  • Page 23 Side A Side B Power Pods CPU Slot #0 CPU Slot #1 CPU Slot #2 CPU Slot #3 DIMM Slots DIMM Slots Memory Daughter Board Power Pods Figure 1-6. CELL Board Features System Overview 1-9...

  • Page 24: Itanium 2 Processors

    Main Components The following sections provide information about server components. Itanium 2 Processors Depending on system configuration, your system uses Intel Itanium 2 64-bit 1.3-GHz/3-MB or 1.5-GHz/6-MB processors. Four Intel Itanium 2 processors are installed within one Cell Board. See Figure 1-6. Up to 4 Cell Boards with a total of up to 16 CPUs can be installed in the 16-way server (1160Xd) and up to 8 Cell Boards with a total of up to 32 CPUs can be installed in the 32-way server (1320Xd).

  • Page 25: Service Processor Board

    Installation of a board in a particular slot and with other boards can determine the actual operating frequency of a board within a bus group. See Chapter 5, “I/O Board Installation” for information about installing a board in a particular slot for optimum operation.

  • Page 26: System Functions

    System Functions The following subsections describe select system functions. Partitioning The Express5800/1000 series server can run more than one operating system or instances of an operating system in the same main cabinet. For example, a configuration containing 4 Cell Boards (Cells hereafter), Cell #0, Cell #1, Cell #2, and Cell #3, can operate as follows: Cell #0 and Cell #1can operate under the same operating system #0 as an SMP (symmetric multi processor) configuration.

  • Page 27: Chipset And Crossbar Switch

    SP command mode (see Chapter 3). Chipset and Crossbar Switch NEC developed a high-performance chipset and crossbar switch that is based on supercomputer mainframe technology. The crossbar switch connects the Cell Boards The crossbar switch has a low latency as well as high data bandwidth. While...

  • Page 28: Expansion

    See Figures 1-8 and 1-9 for diagrams of the Express5800/1160Xd and Express5800/1320 system configurations. See the following sections for a description of system expansion capabilities. ! CAUTION Contact qualified personnel, such as your System Administrator or an NEC Technician, for adding or removing server components. 1-14 System Overview...
  • Page 29 Itanium 2 1-GB memory upgrade Up to 8 sets of the above memory per CELL Board or up to 32 GB per board can be added. SP Console (Standard) RS232C (Console) Standard: 4 CPUs on a 1 CELL Board Up to 4 CELL Board upgrade kits can be added Network devices such as HUB or router...
  • Page 30 Itanium 2 1-GB memory upgrade Up to 8 sets of the above memory per CELL Board or up to 32 GB per board can be added. SP Console (Standard) RS232C (Console) Network devices such as HUB or router Ethernet cable Server management LAN Standard: 4 CPUs on a 1 CELL Board interface...

  • Page 31: Cell Board

    CAUTION Contact qualified personnel, such as your System Administrator or an NEC Technician, for adding or removing server components. Cell Board Each Cell Board supports: 4 Intel Itanium 2 processors 32 DIMMs (16 on the Cell Board, 16 on the Cell Board daughterboard).

  • Page 32: Optional Pcix Unit

    Optional PCIX Unit At least one PCIX Unit is required in a 16-way and 32-way server configuration. PCIX Units can be added as follows: Up to 4 PCIX Units can be added to the 16-way Main Cabinet. Up to 2 PCIX Units can be added to the 32-way Main Cabinet. Up to 6 PCIX Units can be added to the I/O Expansion Cabinet for the 32-way system..

  • Page 33: System Operation

    System Operation Setting Up the Server Starting Up the System Shutting Down the System Using Exception Procedures Reviewing Firmware Operations Booting the OS Using the DVD-ROM Drive Using an Optional Tape Drive...
  • Page 34 1. Check that the server has been installed as described in the Express5800/1080Xd/1160Xd/1320Xd Site Preparation Guide and Express5800/1160Xd/1320Xd Installation Procedures. This server requires installation by qualified personnel such as an NEC technician and system administrator. 2. Make sure that any optional components other than I/O cards or boards, have been installed by an NEC technician.
  • Page 35 PC to the server LAN connection. Note: A LAN cable either comes already connected to the Service Processor board or it is connected by the NEC technician during the server installation. 5. Connect peripheral devices, such as a monitor, mouse, and keyboard, to the rear of the server.
  • Page 36 Starting Up the System Start up the server system as follows. 1. Make sure all external devices, such as the console, keyboard, and mouse have been connected, and the power cords are connected (see the previous section, “Setting Up the Server”). 2.
  • Page 37 Integrated Service Processor. Cabinet-ID:xx, Location:y, State:ssssss iSP login: spfw<ENTER> iSP password: xxxxxxxx<ENTER> Copyright (C) 2002 NEC Corporation, All Rights Reserved. Welcome to Integrated Service Processor. iSP FW version : 01.00 generated on 01/31/2002 19:20:33 iSP MAIN MENU 0) OS(BIOS) serial console of partition#0 (INITIALIZING)
  • Page 38 9. Enter on the SP console to bring up the specified partitions (see Figure 2-5). The service processor turns on power to the specified partitions, initializes the hardware, and hands off the control to the BIOS. The BIOS boots the operating system.
  • Page 39 Shutting Down the System Shut down the system as follows. 1. Select a method to shut down the system: Note: If supported by your operating system, Windows Shut Down is the recommended method of shutting down the system. Recommended shutdown – Windows Shut Down (if supported by the operating system): Shut down the operating system (OS).
  • Page 40 iSPyz:---> dn<ENTER> System power will be turned off if the software (OS) is NOT running. Only power button interrupt will be generated if the software (OS) is running. If you want to turn off the system power in any system state, use DF command. Enter partition number (0-7/all/CR=exit) : all<ENTER>...

  • Page 41: Dump

    3. Power off the console. 4. At the rear of the system, turn off the Power Bay Unit circuit breakers (see Figure 2-3). 5. Power off peripheral devices not powered by the server. 6. Power off the main circuit breaker or power distribution board. Note: If the server power cord is connected to a power control unit such as an UPS (Uninterruptible Power Supply),...

  • Page 42: Restart

    Restart Perform a system restart as follows: 1. Stop the operating system. 2. Enter at the SP command prompt. Power On Reset Perform a power on reset as follows: 1. Stop the operating system. 2. Enter at the SP command prompt. Check that the main chassis fans stop rotating.

  • Page 43: Reviewing Firmware Operations

    Reviewing Firmware Operations The following sections describe the firmware (FW) operations that take place before the operating system starts up. Startup Triggers The following triggers make the firmware perform the operations preceding the startup of the operating system: DC On – Startup of the system. Dump –...

  • Page 44: Booting The Os

    Booting the OS The following sections include information about the EFI Boot Manager, EFI shell, shell commands, and booting the OS from the EFI shell. OS Boot from Boot Manager The EFI Boot Manager automatically starts after a BIOS bootup (see Figure 2-9).

  • Page 45: Efi Shell

    EFI Boot Manager ver 1.10 [14.56] Please select a boot option Acpi(PNP0A03,0)/Pci(2|1)/Ata(Primary,Master)/CDROM(Entry1) Acpi(PNP0A03,1)/Pci(3|0)/Scsi(Pun0,Lun0)/HD(Part1,Sig17FB0000) EFI Shell [Built-in] Disk Indicates OS Boot Boot option maintenance menu Use the arrow keys to change settings Figure 2-10. OS Boot from EFI Boot Manager Screen EFI Shell From the EFI Boot Manager, you can activate the EFI shell.

  • Page 46: Efi Shell Commands

    EFI Shell Commands The following table lists and describes the shell commands in the EFI shell. To execute an EFI shell command, enter the EFI shell command at the EFI shell prompt and press Enter Table 2-1. EFI Shell Commands Command Description alias...
  • Page 47 Table 2-1. EFI Shell Commands (continued) Command Description help help [-b] | [cmd] Displays the help information. hexedit hexedit [[-f] FileName | [-d Edits in hexadecimal mode. DiskName Offset Size] | [-m Offset Size] load load file [file ...] Loads the EFI driver. LoadPciRom LoadPciRom [FileName] Loads the PCI option ROM image from...

  • Page 48: Os Boot From Efi Shell

    OS Boot from EFI Shell You can boot the OS from the EFI Boot Manager. You can also boot the OS by entering commands from the EFI Shell. An example follows for booting the OS from the SCSI hard disk drive in a hardware configuration containing: IDE DVD-ROM (Master) SCSI HDD: OS boot disk...

  • Page 49: Notes For Os Installation

    4. Start the OS loader by entering the directory file name, in this example, setupldr.efi , at the fs0:\os prompt and press Enter fs0:\> cd os fs0:\os> ls Directory of fs0:\os 03/13/00 05:44p <DIR> 2,048 . 03/13/00 05:44p <DIR> 512 .. 12/22/99 00:58p 635,392 setupldr.efi 1 File...

  • Page 50: Checking Failure

    Table 2-2. Formats Conforming to EDD3.0 Specification Path Display Description Acpi(PNP0A03, X) Indicates that the device is installed under the PCI host bus. X: PCI host bus bridge number (starting with 0). Pci(D|F) Indicates PCI installation information of the device. D: PCI device number (Device numbers 2 –...

  • Page 51: Using The Dvd-Rom Drive

    Using the DVD-ROM Drive A DVD-ROM drive comes standard in the core PCIX Unit. The DVD-ROM drive supports DVD-ROM and CD-ROM media. See the following sections for information about using DVD-ROM or CD-ROM discs in the DVD-ROM drive. WARNING Take care when inserting and removing DVD-ROM media. To prevent injury, keep hands away from the tray when ejecting or inserting the tray.

  • Page 52: Using An Optional Tape Drive

    DVD-ROM/CD-ROM Label Facing Up Tray Eject Button PCIX Unit Figure 2-14. Inserting/Removing a DVD-ROM/CD-ROM Disc Using an Optional Tape Drive You can add an optional digital audio tape (DAT) drive to the PCIX Unit. See the following sections for information about: environmental DAT specifications DAT cartridge labels write protection...

  • Page 53: Dat Cartridge Labels

    Storage Environment: Temperature: 41 to 113°F (5 to 45°C) Humidity: 20 to 80%, no condensation Maximum wet bulb humidity: 78.8°F (26°C) DAT Cartridge Labels Use the following labeling information: Place labels securely on the DAT cartridge in the position shown in Figure 2-15.

  • Page 54: Write Protection

    Write Protection You can protect written data on the audio digital tape from being erased. To protect the data, open the write protect slider on the label side of the digital audio tape cartridge (see Figure 2-16). To write or overwrite data on the digital audio tape, close the write protect slider.
  • Page 55 DAT Drive Cover DAT Drive Cover Eject Button Cartridge PCIX Unit Figure 2-17. Inserting and Removing a DAT Cartridge System Operation 2-23...

  • Page 57: Service Processor

    Service Processor SP Console OS Console Virtual SOP SP Command Console SP Command Reference...

  • Page 58: Sp Console

    SP Console The service processor (SP) in the Express5800/1000 series server provides the interface for system management and RAS functions. The SP is on the service processor (iSP) board. The following sections describe: SP console connections Console operations Console status and login authentication Login and Main Menu.

  • Page 59: Console Operations

    Table 3-1. Console Configuration Settings Console Type Configuration Item Default Settings Serial Baud rate 9600 Data bit length STOP bit length Parity bit None Flow control RTS/CTS TCP port (Do not use 21, 23. They are for 5001 factory use.) IP address 10.1.1.1 Subnet mask...
  • Page 60 Table 3-2. Login Account and Password Defaults Login Type Defaults Login Account spfw Login Password Note: Only one connection to the OS Console per partition, up to five connections to the Virtual SOP in the entire system, and only one prime connection to the SP Command Console in the entire system can be made simultaneously.

  • Page 61: Login And Main Menu

    Integrated Service Processor. Cabinet-ID:xx, Location:y, State:ssssss iSP login: spfw<ENTER> iSP password: xxxxxxxx<ENTER> Copyright (C) 2002 NEC Corporation, All Rights Reserved. Welcome to Integrated Service Processor. iSP FW version : 01.00 generated on 01/31/2002 19:20:33 iSP MAIN MENU 0) OS(BIOS) serial console of partition#0 (INITIALIZING...
  • Page 62 Table 3-4. Login and Main Menu Screen References Reference Description “xx “is the ID for identification of a cabinet in a system composed of multiple cabinets. “y” indicates the installation location of the iSP board with 0 or 1. “ssssss” becomes “master” if operating as the master, “backup” if operating as the backup, or “undetermined “...
  • Page 63 Table 3-5. Main Menu Login Events and Operations Event Operation The account or password is invalid. Displays “incorrect” and then displays the login prompt again. The account or password is invalid three times Disconnects the session. in a row. Left for 5 minutes in login or password prompt Displays “timeout”...

  • Page 64: Os (Bios) Console

    OS (BIOS) Console When you select the OS (BIOS) Console on the iSP Main Menu, input/output is redirected to the OS (BIOS) serial controller. To return to the Main Menu, press (CTRL+B). The image displayed and the operation during redirection depend on the BIOS and OS running in the partition;...
  • Page 65 Table 3-7. Login and Main Menu Screen References Reference Description When you enter 0-7, the menu is redirected to the OS Console of the corresponding partition. The starting message of OS Console redirection is displayed. “:” is input and output during the OS Console redirection depend on the OS and BIOS.

  • Page 66: Virtual Sop

    Virtual SOP When you select Virtual SOP (Virtual System Operator Panel) on the iSP Main Menu, Virtual SOP appears. The Virtual SOP periodically refreshes the display of the state of all the partitions. To return to the Main Menu from the Virtual SOP, press (CTRL+B).

  • Page 67: Partition State Display

    Table 3-10. Virtual SOP Screen References Reference Description When you enter “V,” the Virtual SOP appears. Virtual SOP image is displayed. The Virtual SOP is periodically displayed. Pressing ^B terminates the Virtual SOP. Return to Main Menu. Partition State Display The state display for each partition is described in the following figure and table.
  • Page 68 Table 3-11. Reference to Partition State Display (cont’d) Reference Display Description 3 (cont’d) FAULT Indicates that the BIOS has finished initialization of the system and control has been passed to EFI. SHUT DOWN iSP is shutting down the hardware. NOT CONFIGURED Partition is not configured.

  • Page 69: Sp Command Console

    SP Command Console When you select the iSP commands on the iSP Main Menu, the SP Command Console appears. Initially, the SP Command Console is in Normal Mode for general operation. You can switch to Maintenance Mode (which allows all operations) by using the CM command.

  • Page 70: Sp Command Console Buffer

    SP Command Console Buffer SP Command Console output from the service processor might contain important information, such as the cause of a system state change. With the LAN console, however, you cannot monitor the console output from the end of iSP startup until the LAN console connection is established.

  • Page 71: Sp Command List

    SP Command List The following table lists the SP commands by category. Table 3-16. System Control Commands Command Name Function Mode Mode State Shut Down System Power The iSP turns off the DC power of the (override) specified partition without notifying the SW (OS) even if it is running.
  • Page 72 Table 3-17. Configuration Command Command Name Function Mode Mode State Hardware Configuration The iSP displays and/or modifies the hardware configuration, including partitions. Table 3-18. Normal Mode Commands Command Name Function Mode Mode State Change Command Mode Enter into or exit from the maintenance m/b/u mode.

  • Page 73: Sp Command Reference

    SP Command Reference The following sections provide detailed information about SP commands. The description for each command lists whether the command can be executed in Normal or Maintenance mode, whether it can be executed in the master, backup, or undetermined iSP. For example: NML: “X”...

  • Page 74: Cm (Change Command Mode)

    CM (Change Command Mode) This command changes the command mode from Normal mode to Maintenance mode. Entering Maintenance mode requires the entry of a password. Table 3-19. CM Command Screen Screen Image Reference iSPyz:---> cm<ENTER> Password is needed to enter maintenance mode. maintenance password : xxxxxxxx <ENTER>...

  • Page 75: Df (Shut Down System Power )

    DF (Shut Down System Power <override>) This command turns off system power (DC). The DF command turns off the system regardless of the operation state of the OS or BIOS and without notifying either. (This corresponds to the power button override function of a system that has a physical power button.) Table 3-21.

  • Page 76: Dl (Display Sp Logs)

    DL (Display SP Logs) This command displays the logs stored in the iSP. You can upload the logs as a file to an FTP server. The logs are managed in two iSPs independently if the iSP is redundant. The logs are stored in the storage of the iSP operating as the master when the logs occurred and won’t be transferred to the new master iSP if the master is changed.
  • Page 77 Table 3-23. DL Screen (cont’d) Screen Image Reference Filter logs by category? a ... all 1 ... system control 7 ... fatal error 2 ... system configuration 8 ... recoverable error 3 ... BIOS event 9 ... dump event 4 ... IPMI SEL 11 ...
  • Page 78 Table 3-23. DL Screen (cont’d) Screen Image Reference ***** LOG ANALYSIS RESULT ***** ***** LOG ANALYSIS END ***** action? (h=help/CR=next) : q<ENTER> Log area status (03/01/2002 18:59:00 iSPFW R01.01): Type Entries Latest No. Earliest Latest ---------------------- ------------ ------------- ----------------------------- ------------------------------- activity 1000 01/31/2002 12:24:50...
  • Page 79 Table 3-24. DL Screen References (cont’d Reference Description If you enter “h” in response to “action?”, Help for the action appears. If you specify an activity log number, you jump to the log number. If you specify the time, you jump to the oldest log after the specified time. The log with the display of “XXX log was collected.”...

  • Page 80: Dn (Shut Down System Power)

    DN (Shut Down System Power) This command turns off system power (DC). If software is not running (for example, in the S0 state), this command turns off the system. If any software, such as the OS and BIOS, is running (for example, in the S0 state), this command only reports a power button interrupt to the software, and the process for the power button interrupt depends on the software.

  • Page 81: Dp (System Dump)

    DP (System Dump) This command generates a dump interrupt in the system. The actual operation of the dump processing and the following system reset depend on the software (OS or BIOS). This command only generates a dump interrupt. Obviously, nothing happens if no software is running. Table 3-27.

  • Page 82: Dt (Sp Date And Time)

    DT (SP Date and Time) Displays and changes the time of the real-time clock built into the iSP. This command only displays time in Normal Mode. Table 3-29. DT Screen Screen Image Reference iSPyz:---> dt<ENTER> current iSP RTC : 19:20:57,01/31/2002 +09:00 syncronized with NTP server (10.20.30.40) DT command terminated A: In Normal Mode, the command terminates after displaying the current time.

  • Page 83: En (Environmental Information)

    EN (Environmental Information) This command lists the states of the system’s detected temperature and fan errors, etc. The components in the DC POWER OFF state are not supervised. Table 3-30. EN Screen Screen Image Reference iSPyz:---> en<ENTER> ---- Power Bay Units ---------------------------------------------------------- 19:20:57,01/31/2002 ---- state DPS0 DPS1...
  • Page 84 Table 3-30. EN Screen (cont’d) Screen Image Reference Previous/Next page? (p[revious]/n[ext]/e[xit]/CR=next) : <ENTER> ---- Temperature (Celsius) [1/7] ----------------------------------------- 19:20:57,01/31/2002 ---- current threshold comment IPMI ACPI CELL0 45/ 50 60/ 62 PROC00 80/ 85 100/102 * PROC01 80/ 85 100/102 FAN High-speed PROC02 PROC03 * CELL1...
  • Page 85 Table 3-30. EN Screen (cont’d) Screen Image Reference ---- Temperature (Celsius) [4/7] ---------------------------------------- 19:20:57,01/31/2002 ---- current threshold comment IPMI ACPI CELL6 45/ 50 60/ 62 FAN High-speed PROC60 80/ 85 100/102 PROC61 80/ 85 100/102 PROC62 80/ 85 100/102 PROC63 80/ 85 100/102 CELL7...
  • Page 86 Table 3-30. EN Screen (cont’d) Screen Image Reference ---- Temperature (Celsius) [7/7] ------------------------------------- 19:20:57,01/31/2002 ---- current threshold comment IPMI ACPI PCIX4(F) 60/ 62 IORB 60/ 62 60/ 62 PCIX5(-) IORB PCIX6(F) 60/ 62 IORB 60/ 62 reported to the software 60/ 62 PCIX7(F) 60/ 62...
  • Page 87 Table 3-31. EN Screen References (cont’d) Reference Description When you press ENTER, the next page is displayed Displays an alarm state for the DCDC converter on the CELL Board/XBC Board in the CPU/Memory Sub-chassis (16-way)/(32-way) in the Main Cabinet. If an alarm occurs, an asterisk (*) mark appears at the beginning of the line. Displays an alarm state for the DCDC converter/fan/temperature of the Full/Half-size PCIX Unit.

  • Page 88: Fv (Firmware Versions)

    FV (Firmware Versions) This command displays the version information of the iSPFW and BIOS. The command performs a checksum of the storage area. It is managed independently in each iSP if the iSP is redundant. Table 3-32. FV Screen Screen Image Reference iSPyz:--->...

  • Page 89: Hc (Hardware Configuration)

    HC (Hardware Configuration) This command displays and changes the configuration information of the hardware. The command displays and changes the partition settings. See Table 3-38, “HC – ALL Display Screen” for an example of the HC display screen. See the following tables for a list of hardware components and subcomponents and for a list of subcommands and descriptions.
  • Page 90 Table 3-35 HC Subcommands arg1 arg2 arg3 arg4 Description help Displays the list of subcommands. This command can be executed in the AC POWER ON or DC POWER ON state. quit Exits from the HC command. exit Before an exit, the check subcommand is automatically executed.
  • Page 91 Table 3-35 HC Subcommands (cont’d) arg1 arg2 arg3 arg4 Description mmcxy disp Displays the detailed state of the ROW under (cont’d) control of the MMC specified by “xy”. “x” is the physical CELL Board number (0-7) on which MMC is installed. “y”...
  • Page 92 Table 3-35 HC Subcommands (cont’d) arg1 arg2 arg3 arg4 Description attach iorx Associates the IOR Daughter Board having the (cont’d) physical number x with the logical IOR Daughter Board number m of partition n. (m: The number recognizable by the BIOS and software.) “p”...
  • Page 93 Table 3-35 HC Subcommands (cont’d) arg1 arg2 arg3 arg4 Description swap Used to swap a CELL Board with another CELL Board while the software is operating. This subcommand is not supported at (This is not a combination of “attach” and present.
  • Page 94 Table 3-35 HC Subcommands (cont’d) arg1 arg2 arg3 arg4 Description Used to instruct the iSP to add components manually. The management state of the iSP changes from “nonexist” to “power-off”. Displays Help for “add” when the argument is omitted or an error is made. This subcommand can be executed in the AC POWER ON state or DC POWER ON state.
  • Page 95 Table 3-35 HC Subcommands (cont’d) arg1 arg2 arg3 arg4 Description procxy Adds a processor. (cont’d) “x” is the physical CELL Board number (0-7). “y” is the processor installation location on the CELL Board (0-3). mmcx1 Adds a MMC (and ROW) on the Memory Daughter Board.
  • Page 96 Table 3-35 HC Subcommands (cont’d) arg1 arg2 arg3 arg4 Description enable xbcx [all] Enables the XBC Board. (cont’d) “x” is the XBC Board physical number (0-3). When the second argument is omitted, only the XBC Board is enabled, and the states of any other subcomponents do not change.
  • Page 97 Table 3-35 HC Subcommands (cont’d) arg1 arg2 arg3 arg4 Description enable cellx [all] Enables the CELL Board. (cont’d) “x” is the physical CELL Board number (0-7). When the second argument is omitted, only the CELL Board is enabled, and the states of any other subcomponents do not change.
  • Page 98 Table 3-35 HC Subcommands (cont’d) arg1 arg2 arg3 arg4 Description enable mmcxy cachez Enables the Cache. (cont’d) (cont’d) “z” is the Cache number (0-7). tagx[sy] Enables the TAG. “x” is the physical CELL Board number (0-7). “s” is either “e” (EVEN side) or “o” (ODD side). “y”...
  • Page 99 Table 3-35 HC Subcommands (cont’d) arg1 arg2 arg3 arg4 Description enable gxbxy Enables the GXB. (cont’d) “x” is the DGI/I2C cable port number of the cable from the iSP to the Full/Half-size PCIX Unit (0-7). “y” is the GXB number (0-3) within the Full/Half- size PCIX Unit.
  • Page 100 Table 3-35 HC Subcommands (cont’d) arg1 arg2 arg3 arg4 Description ncconn Used to set connection information of the 1.6G cable. Displays Help for “ncconn” when the argument is omitted or an error is made. This subcommand can be executed when all partitions are in the DC POWER OFF state.
  • Page 101 Table 3-35 HC Subcommands (cont’d) arg1 arg2 arg3 arg4 Description cellx on|off Turns on/off the LED of the CELL Board. (cont’d) “x” is the physical CELL Board number (0-7). pcixx on|off Turns on/off the LED of the Full/Half-size PCIX Unit. “x”...
  • Page 102 Table 3-35 HC Subcommands (cont’d) arg1 arg2 arg3 arg4 Description check Checks the current configuration information from the following points: Presence of units whose location information is not entered Presence of “DISABLE” components Presence of “INVISIBLE” units Configuration violating the installation restrictions Configuration with penalty in performance/RAS.
  • Page 103 Table 3-36. HC State Display Strings (cont’d) Displayed String Description backup This is valid only for the state display of the ISP Board/CLK Board. Indicates that it is operating as the backup. enable Indicates that the component itself is enabled (used for system operation). DISABLE Indicates that the component itself is disabled (not used for system operation).
  • Page 104 Table 3-38. HC ALL Display Screen Screen Image Reference iSPyz:---> hcENTER> iSP FW version is Rxx.xx. HC> disp all<ENTER> ==== Partitioning ================================= 19:20:23,01/31/2002 === part0(RUN ) CELL:01-----7 (01-----2) IOR:0-----67 (0-----12) SM: 128MB part1(INIT) CELL:--2----- (--5-----) IOR:-1------ (-0------) SM: 0MB part2(STOP) CELL:---3---- (---4----) IOR:--2----- (--0-----) SM:1024MB part3(STOP) CELL:------6- (------3-) IOR:---3----...
  • Page 105 Table 3-38. HC ALL Display Screen (cont’d) Screen Image Reference ---- CELL0 ----------------------------------------------------------------------- 19:20:23,01/31/2002 --- CELL0 (loc=15/0/18+8F/00) online enable part.0 (LCN=2) PROC00 offline DISABLE --- PROC01 online enable PROC02 offline DISABLE* --- PROC03 nonexist. MMC00 online enable MMC01 offline enable TAG0 --------- --------...
  • Page 106 Table 3-38. HC ALL Display Screen (cont’d) Screen Image Reference ---- TAG0 ----------------------------------------------------------------------- 19:20:23,01/31/2002 --- TAG0 --------- -------- TAG0e0 --------- DISABLE TAG0e1 --------- enable TAG0e2 --------- DISABLE* --- TAG0e3 --------- enable TAG0o0 --------- enable TAG0o1 --------- DISABLE TAG0o2 --------- enable TAG0o3 --------- enable ---- CELL1 --------------------------------------------------------------------- 19:20:23,01/31/2002 ---...
  • Page 107 Table 3-38. HC ALL Display Screen (cont’d) Screen Image Reference ---- PCIX2(H) ------------------------------------------------------------------ 19:20:23,01/31/2002 --- IOR2 (loc=15/1/13+4R) offline enable part.0 (LIN=2,PRI=9) 1.6G port0 -------- enable --->XBC2 port0 1.6G port1 -------- enable --->XBC3 port1 IOC20 -------- enable IOC21 -------- enable GXB20 (loc=15/1/13+4R) -------- enable BUS-A...
  • Page 108 Table 3-39. HC ALL Display Screen References Reference Description Displays the partition configuration information. Displays the configuration information of the units/devices in the Main Cabinet. Displays the configuration information of the PCIX Unit in the Main Cabinet. Displays the configuration information of the units/devices in the I/O Expansion Unit. Displays the configuration information of the PCIX Unit in the I/O Expansion Cabinet.

  • Page 109: He (Help)

    HE (Help) This command displays the list of commands. The list of commands differs for Normal Mode and Maintenance Mode. Note: This command can also be executed by entering HELP. Table 3-40. HE Display Screen Screen Image Reference iSPyz:---> heENTER> iSP commands : System Control (both customers and maintenance persons) DF –...

  • Page 110: Ml (Message Log)

    ML (Message Log) This command displays the contents of the iSP message buffer. (The message output generated in the display operation of the message buffer is not stored in the message buffer.) Table 3-41. ML Display Screen Screen Image Reference iSPyz:--->...

  • Page 111: Pc (Power Cycle)

    PC (Power Cycle) This command turns off the power (DC) of the system, and then turns it on again to start up the system. Note: This command turns off the system regardless of the operation state of the OS or BIOS and without notifying either. Table 3-43.

  • Page 112: Rs (Cold Reset System)

    RS (Cold Reset System) This command performs a cold reset of the system. Note: This command performs a reset without any notification even if the OS (BIOS) is running. Table 3-45. RS Display Screen Screen Image Reference iSPyz:---> rsENTER> CAUTION: System will be reset without any notice to the softwares even if they are running.

  • Page 113: Up (Bring Up System)

    UP (Bring Up System) This command turns on the power (DC) of the system, initializes the hardware, and then starts up the BIOS. Whether the operating system starts up depends on the BIOS/EFI settings. Note: The UP command can be executed in Normal mode or Maintenance mode.

  • Page 115: Bios Setup

    BIOS Setup Setup Overview Menu Tree Menu Options and Settings BIOS Virtual DIP Switch PCI Online Maintenance (PCI Hot Plug)

  • Page 116: What Is Setup

    Setup Overview See the following sections for a description of BIOS Setup, when you need to change BIOS settings, and how to start and use BIOS Setup. What is Setup? Setup is a utility that allows you to set up the system hardware. Settings for PCI Bridges and devices that connect with the system are included.

  • Page 117: Settings Of Cmos And/Or Nvram Are Cleared

    Windows Server 2003 00000000 Linux (NEC Linux) Adding or Deleting a Boot Device To add or delete a boot device, you must enable or disable the Option ROM expansion of the PCI card to which the boot device is connected. To add a boot device, specify to “enable the Option ROM expansion of the PCI card that controls the boot device”...

  • Page 118: The Bios Version Has Changed

    The BIOS Version Has Changed When changing the BIOS version, start Setup and change the settings. Change the setting values of Setup to the default values (Specify “Load Setup Defaults” in the Exit menu). The Host Bus Bridge Configuration Has Changed When the configuration is changed due to the addition or deletion of the Host Bus Bridge, some setting values are reset to their initial states.

  • Page 119: Screen Description

    Screen Description To configure Setup, use the keys on the bottom portion of the screen. Set t in g it em s P a r a m et ers (Wh en select ed, let t er color r ever sed) Cu r r en t m en u P h oen ixBIOS Set u p...

  • Page 120: Menu Tree

    Table 4-2. Key Functions Item Description F1 key Displays the help screen. Cursor key (^ / v) Selects the item displayed on the screen. The highlighted item is the one currently selected. (cursor_up / cursor_down) - key / + key Changes the value of the selected item (parameter).

  • Page 121: Main Menu Overview

    Main Menu Overview In the main menu, you can perform the following actions. For detailed information on the functions and parameters, refer to “Main Menu.” View the language used View/set date and time View the firmware revision View CPU information View the IDE devices installed View the memory capacity of the system Main...

  • Page 122: Advanced Menu Overview

    Advanced Menu Overview In the Advanced menu, you can perform the following actions. For detailed information on the functions and parameters, refer to “Advanced Menu.” Specify behavior when a POST error occurs. Configure I/O devices Stall monitoring at the BIOS boot Stall monitoring at the OS boot Set the Option ROM expansion of the PCI device Set the keyboard attributes...

  • Page 123: Security Menu Overview

    Security Menu Overview In the Security menu, you can perform the following actions. For detailed information on the functions and parameters, refer to “Security Menu.” Display whether the password of the supervisor (administrator) is set; or set a password Display whether the password of the general user is set; or set a password Set a Password for the BIOS boot Disable key operation when the Option ROM menu of the PCI device is executed Security...

  • Page 124: System Hardware Menu Overview

    System Hardware Menu Overview In the System Hardware menu, you can perform the following actions. For detailed information on the functions and parameters, refer to “System Hardware Menu.” Set the parameters of the PCI host bus bridge Set the serial console redirection function Set the number of interrupt vectors Set whether to use High MMIO Host Bus...
  • Page 125 Console Redirection Serial Port Select Debug Port Select System Serial Port Baud Rate Console Type Flow Control Serial Port 1 Baud Rate Console Type Flow Control Shrink total number of interrupt vectors Memory Mapped I/O > 4GB BIOS Setup 4-11...

  • Page 126: Exit Menu Overview

    Exit Menu Overview In the Exit menu, you can perform the following actions. For detailed information on the functions and parameters, refer to “Exit Menu.” Exit from Setup saving all changes Exit from Setup without saving any changes Restore the initial values Restore the settings, discarding any changes Save the changes to the settings Exit...

  • Page 127: Menu Options And Settings

    Menu Options and Settings The following sections provide BIOS Setup menu screens, menu options, and descriptions of the settings. Main Menu When you start Setup, the Main menu appears first. P h oen ixBIOS Set u p Ut ilit y Ma in Ma in Adva n ced...
  • Page 128 The options you can set on the Main menu screen and their functions are shown below. For the Primary Master and the Primary Slave, the respective submenus appear when you press the Enter key after you select it. Table 4-3. Main Menu Options Menu Option Description...

  • Page 129: Advanced Menu

    Advanced Menu When you move the cursor over “Advanced” by using the arrow keys (< and >), the Advanced menu appears. For information on the option functions, refer to “Table 4-4 Advanced Menu Options.” PhoenixBIOS Setup Utility Main Advanced Security System Hardware Exit Item Specific Help...
  • Page 130 Table 4-4. Advanced Menu Options Menu Option Description Advanced Specifies available options for when an error occurs during POST. For more information, refer to “Advanced Submenu” Peripheral Displays/changes the settings of built-in I/O devices. Configuration For more information, refer to “Peripheral Configuration Submenu.”...

  • Page 131: Advanced Submenu

    Advanced Submenu When you select “Advanced” on the Advanced menu, the following screen appears. For more information on the option functions, refer to “Table 4-5 Advanced Submenu Options.” P h oen ixBIOS Set u p Ut ilit y Adva n ced Adva n ced It em Specific H elp [E n a bled]...

  • Page 132: Peripheral Configuration Submenu

    Peripheral Configuration Submenu When you select “Peripheral Configuration” on the Advanced menu, the following screen appears. For more information on the option functions, refer to “Table 4-6 Peripheral Configuration Submenu.” P h oen ixBIOS Set u p Ut ilit y Adva n ced P er iph er a l Con figu ra t ion It em Specific H elp...
  • Page 133 Table 4-6. Peripheral Configuration Submenu Menu Option Description System Serial Port Disabled Disables the system serial port, or specifies the I/O address and interrupt line. [2F8,IRQ3] FEB08000,IRQ3 Auto Serial port 1 Disabled Disables the serial port 1, or specifies the I/O address and interrupt line.

  • Page 134: Monitoring Configuration Submenu

    Monitoring Configuration Submenu When you select “Monitoring Configuration” on the Advanced menu, the following screen appears. For more information on the option functions, refer to “Table 4-7 Monitoring Configuration Submenu.” PhoenixBIOS Setup Utility Main Advanced Monitoring Configuration Item Specific Help POST Monitoring Observation: [w/o OptROM] Selects the point at...
  • Page 135 Table 4-7. Monitoring Configuration Submenu Menu Option Description POST Monitoring [w/o OptROM] Specifies whether to perform stall monitoring during execution of Option ROM in stall monitoring at the BIOS Observation w/ OptROM startup. w/ OptROM: Continues stall monitoring during execution of Option ROM.

  • Page 136: Option Rom Submenu

    Option ROM Submenu When you select “Option ROM” on the Advanced menu, the following screen appears. For more information on the option functions, refer to “Table 4-8 Option ROM Submenu.” PhoenixBIOS Setup Utility Main Advanced Option ROM Item Specific Help Host Bus Bridge#0 0 (0/0/0/0) [00/000/81C]...
  • Page 137 Table 4-8. Option ROM Submenu Menu Option Description Host Bus Bridge#M Specifies whether to operate Option ROM expansion of the PCI device installed under the extended PCI bus. N (W/X/Y/Z) (aa/bbb/ccc) Host Bus Bridge#M N (W/X/Y/Z) (aa/bbb/ccc) M: HBB number (0-63) N: PCI/PCI-X bus number (0-231) W: Cell Board number (0-7) X: IOC number (0-1)

  • Page 138: Extended Pci Slot Submenu

    Extended PCI Slot Submenu When you select “Extended PCI Slot (Host Bus Bridge#N)” on the Option ROM submenu under the Advanced menu, the following screen appears. For more information on the option functions, refer to “Table 4-9 Extended PCI Slot Submenu.”...
  • Page 139 Table 4-9. Extended PCI Slot Submenu Menu Option Description PCI Slot#1 Disabled Specifies whether to expand Option ROM expansion of the PCI device installed in PCI Slot#1-4 on the specified Option ROM Scan [Legacy Enabled] PCI bus. EFI(EBC) Enabled PCI Slot#2 Disabled: No Option ROM expansion EFI(IPF) Enabled Option ROM Scan...
  • Page 140 Procedure when a video card is installed: If you disable the Option ROM of the slot where a video card is installed, the VGA console becomes unavailable. In this case, the BIOS proceeds as follows: In BIOS Setup, “Legacy Enabled” is displayed for the slot where the video card is installed, and “Disabled”...

  • Page 141: Numlock Submenu

    Numlock Submenu When you select “Numlock” on the Advanced menu, the following screen appears. For more information on the option functions, refer to “Table 4-11 Numlock Submenu.” P h oen ixBIOS Set u p Ut ilit y Ma in Adva n ced N u m lock It em Specific H elp Select s P ower-on st a te...
  • Page 142 Table 4-11. Numlock Submenu Menu Option Description Numlock [Auto] Enables or disables Numlock at system startup. “Auto” enables Numlock when any entry from the numeric keypad is detected. Key Click [Disabled] Enables or disables key clicks. Enabled Keyboard auto-repeat 2/sec Specifies the number of characters to be output for one rate second of key repeat.

  • Page 143: Security Menu

    Security Menu When you move the cursor over “Security” by using the arrow keys (< and >), the Security menu appears. For more information on the option functions, refer to “Table 4-12 Security Menu.” PhoenixBIOS Setup Utility Main Advanced Security System Hardware Exit Item Specific Help...
  • Page 144 The options you can set on the Security menu screen and their functions are shown in the following table. Table 4-12. Security Menu Item Option Description Supervisor Password is Displays whether the supervisor’s password is set. The Password is not displayed. User Password is Displays whether the user’s password is set.

  • Page 145: System Hardware Menu

    System Hardware Menu When you move the cursor over “System Hardware” by using the arrow keys (< and >), the System Hardware menu appears. For more information on the option functions, refer to “Table 4-13 System Hardware Menu.” P h oen ixBIOS Set u p Ut ilit y Ma in...
  • Page 146 The options you can set on the System Hardware menu and their functions are shown in the following table. Table 4-13. System Hardware Menu Item Option Description HBB Configuration Specifies Master Latency Timer, PCI Gap, and I/O space for each host PCI bus bridge (HBB: Host Bus Bridge). For more information, refer to “HBB Configuration Submenu.”...

  • Page 147: Hbb Configuration Submenu

    HBB Configuration Submenu When you select “HBB Configuration” on the System Hardware menu, the following screen appears. For more information on the option functions, refer to “Table 4-14 HBB Configuration Submenu.” P h oen ixBIOS Set u p Ut ilit y Syst em H a rdwa r e H BB Con figu r a t ion It em Specific H elp...
  • Page 148 The options you can set on the HBB Configuration submenu and their functions are shown in the following table. Table 4-14. HBB Configuration Submenu Item Option Description PCI Bus Parity Error Displays/sets whether to assert PCI bus parity errors in Assert the settings of PCI Parity Error response.

  • Page 149: Pci Bus Parity Error Assert Submenu

    PCI Bus Parity Error Assert Submenu When you select “PCI Bus Parity Error Assert” on the HBB Configuration submenu, the following screen appears. For more information on the option functions, refer to “Table 4-15 PCI Bus Parity Error Assert Submenu.” P h oen ixBIOS Set u p Ut ilit y...
  • Page 150 The options you can set on the PCI Bus Parity Assert submenu and their functions are shown in the following table. Table 4-15. PCI Bus Parity Error Assert Submenu Item Option Description HBB #N (W/X/Y/Z) Disabled HBB #N (W/X/Y/Z): [Enabled] N: HBB number (0 - 63) W: Cell number (0 - 7) X: IOC number (0 - 1)

  • Page 151: Master Latency Timer Submenu

    Master Latency Timer Submenu When you select “Master Latency Timer” on the HBB Configuration submenu, the following screen appears. For more information on the option functions, refer to “Table 4-16 Master Latency Timer Submenu.” P h oen ixBIOS Set u p Ut ilit y Syst em H a rdwa r e Ma st er La t en cy Tim er :...
  • Page 152 The options you can set on the Master Latency Timer submenu and their functions are shown in the following table. Table 4-16. Master Latency Timer Submenu Item Option Description HBB #N (W/X/Y/Z) [00h] ~ F8h HBB #N (W/X/Y/Z): N: HBB number (0 - 63) W: Cell number (0 - 7) X: IOC number (0 - 1) Y: GSL number (0 - 1)

  • Page 153: Multi Transaction Timer Submenu

    Multi Transaction Timer Submenu When you select ”Multi Transaction Timer” on the HBB Configuration submenu, the following screen appears. For more information on the option functions, refer to “Table 4-17 Multi Transaction Timer Submenu.” P h oen ixBIOS Set u p Ut ilit y Syst em H a rdwa r e Mu lti Tr a n sa ct ion Tim er :...
  • Page 154 Table 4-17. Multi Transaction Timer Submenu Item Option Description HBB #N (W/X/Y/Z) [00h] ~ F8h HBB #N (W/X/Y/Z): N: HBB number (0 - 63) W: Cell number (0 - 7) X: IOC number (0 - 1) Y: GSL number (0 - 1) Z: PCI bus number (0 - 1) Displays/sets the Multi Transaction Timer of the host PCI bus bridge.

  • Page 155: Low Mmio Configuration Submenu

    Low MMIO Configuration Submenu When you select “Low MMIO Configuration” on the HBB Configuration submenu, the following screen appears. For more information on the option functions, refer to “Table 4-18 Low MMIO Configuration Submenu.” P h oen ixBIOS Set u p Ut ilit y Syst em H a rdwa r e Low MMIO Con figu r a t ion :...
  • Page 156 Table 4-18. Low MMIO Configuration Submenu Item Option Description HBB #N (W/X/Y/Z) [Auto] HBB #N (W/X/Y/Z): N: HBB number (0 - 63) W: Cell Board number (0 - 7) 16MB X: IOC number (0 - 1) 32MB Y: GSL number (0 - 1) 64MB Z: PCI bus number (0 - 1) 128MB...

  • Page 157: High Mmio Configuration Submenu

    High MMIO Configuration Submenu When you select “High MMIO Configuration” on the HBB Configuration submenu, the following screen appears. For more information on the option functions, refer to “Table 4-19 High MMIO Configuration Submenu.” P h oen ixBIOS Set u p Ut ilit y Syst em H a rdwa r e H igh MMIO Con figu r a t ion :...
  • Page 158 Table 4-19. High MMIO Configuration Submenu Item Option Description HBB #N (W/X/Y/Z) [Auto] HBB #N (W/X/Y/Z): N: HBB number (0 - 63) W: Cell Board number (0 - 7) X: IOC number (0 - 1) Y: GSL number (0 - 1) 16GB Z: PCI bus number (0 - 1) 32GB...

  • Page 159: Io Space Configuration Submenu

    IO Space Configuration Submenu When you select “IO Space Configuration” on the HBB Configuration submenu, the following screen appears. For more information on the option functions, refer to “Table 4-20 IO Space Configuration Submenu.” P h oen ixBIOS Set u p Ut ilit y Syst em H a rdwa r e IO Spa ce Con figu r a t ion :...
  • Page 160 Table 4-20. IO Space Configuration Submenu Item Option Description HBB #N (W/X/Y/Z) [Auto] HBB #N (W/X/Y/Z): 256Byte N: HBB number (0 - 63) 512Byte W: Cell Board number (0 - 7) X: IOC number (0 - 1) Y: GSL number (0 - 1) Z: PCI bus number (0 - 1) 16KB Displays/sets the I/O space size of the host PCI bus...

  • Page 161: Pci Bus Configuration Submenu

    PCI Bus Configuration Submenu When you select “PCI Bus Configuration” on the HBB Configuration submenu, the following screen appears. For more information on the option functions, refer to “Table 4-21 PCI Bus Configuration Submenu.” P h oen ixBIOS Set u p Ut ilit y Syst em H a rdwa r e P CI Bu s Con figu r a t ion :...
  • Page 162 Table 4-21. PCI Bus Configuration Submenu Item Option Description HBB #N (W/X/Y/Z) [Auto] HBB #N (W/X/Y/Z): N: HBB number (0 - 63) W: Cell Board number (0 - 7) X: IOC number (0 - 1) Y: GSL number (0 - 1) Z: PCI bus number (0 - 1) Displays/sets the number of the PCI buses supported by the host PCI bus bridge.

  • Page 163: Console Redirection Submenu

    Console Redirection Submenu When you select “Console Redirection” on the System Hardware menu, the following screen appears. For more information on the option functions, refer to “Table 4-22 Console Redirection Submenu.” P h oen ixBIOS Set u p Ut ilit y Syst em H a rdwa r e Con sole Redir ect ion It em Specific H elp...
  • Page 164 Table 4-22. Console Redirection Submenu Item Option Description Serial Port Select Disable Specifies the port that uses the serial console function. [System Serial Port ] Serial Port 1 Debug Port Select [Enable] Specifies whether to use the EFI error display console and OS debug console function.

  • Page 165: Console Redirection - System Serial Port

    Console Redirection – System Serial Port When you select “System Serial Port” on the Console Redirection submenu, the following screen appears. For more information on the option functions, refer to “Table 4-23 Console Redirection – System Serial Port Submenu.” P h oen ixBIOS Set u p Ut ilit y Syst em H a rdwa r e...
  • Page 166 Table 4-23. Console Redirection – System Serial Port Submenu Item Option Description Baud Rate [9.6K] Specifies the baud rate. 19.2K 57.6K 115.2K Console Type [VT100] Specifies the console type. VT100,8bit PC ANSI,7bit PC ANSI VT100+ VT-UTF8 Flow Control No Flow Control Specifies the flow control mode.

  • Page 167: Console Redirection - Serial Port 1

    Console Redirection – Serial Port 1 When you select “Serial Port 1” on the Console Redirection menu, the following screen appears. For more information on the option functions, refer to “Table 4-24 Console Redirection, Serial Port 1 Submenu.” P h oen ixBIOS Set u p Ut ilit y Syst em H a rdwa r e...
  • Page 168 Table 4-24. Console Redirection – Serial Port 1 Submenu Item Option Description Baud Rate [9.6K] Specifies the baud rate. 19.2K 57.6K 115.2K Console Type [VT100] Specifies the console type. VT100,8bit PC ANSI,7bit PC ANSI VT100+ VT-UTF8 Flow Control No Flow Control Specifies the flow control mode.

  • Page 169: Shrink Total Number Of Interrupt Vectors Submenu

    Shrink Total Number of Interrupt Vectors Submenu When you select “Shrink total number of interrupt vectors” on the System Hardware menu, the following screen appears. For more information on the option functions, refer to “Table 4-25 Shrink Total Number of Interrupt Vectors Submenu.” PhoenixBIOS Setup Utility System Hardware Shrink total number of interrupt vectors...

  • Page 170: Memory Mapped I/O > 4Gb Submenu

    Memory Mapped I/O > 4GB Submenu When you select “Memory Mapped I/O > 4GB” on the System Hardware menu, the following screen appears. For more information on the option functions, refer to “Table 4-26 Memory Mapped I/O > 4GB Submenu.” P h oen ixBIOS Set u p Ut ilit y...

  • Page 171: Exit Menu

    Exit Menu When you move the cursor over “Exit” by using the arrow keys (<- ->), the Exit menu appears. For more information on the option functions, refer to “Table 6-27 Options Displayed on the Exit Menu.” P h oen ixBIOS Set u p Ut ilit y Ma in...
  • Page 172 Table 4-27. Exit Menu Item Option Description Exit Saving Changes — Saves the changes to the settings and exits from Setup. Select this item to save the changes made with Setup in CMOS/NVRAM and to exit from Setup. When you select this item, Setup is terminated and the system cold reset is performed automatically.

  • Page 173: Bios Virtual Dip Switch

    Changing a setting can cause the server to lose system configuration information. Use the virtual DIP switch function with caution. Call your system administrator or NEC Technical Support personnel for help before setting this switch. Table 4-28. Virtual DIP Switch Setting Value...

  • Page 174: Pci Online Maintenance (Pci Hot Plug)

    PCI Online Maintenance (PCI Hot Plug) This section describes the Setup Menu operations/procedures required prior to the PCI online maintenance operation. An online maintenance available PCI card requires resources such as PCI Gap, I/O resource, and PCI bus. Prepare those resources correctly with each configuration menu beforehand.

  • Page 175: If A Reboot Occurs

    Select “HBB Configuration” in the System Hardware menu. Specify resources as follows. Use the resource size calculated in step 2. PCI Gap: “Low MMIO Configuration” menu or “High MMIO Configuration” menu specifies PCI Gap (see “Low MMIO Configuration Submenu” and “High MMIO Configuration Submenu.)”...
  • Page 176 If a reboot occurred due to incorrect resource values: The “910E Resource Assignment Failure” BIOS event log is generated. The system checks whether the sum of the resource size is larger than the total resource size of the system during system initialization. When the sum of the resource size is larger than the total resource size, the BIOS event log is generated and the system reboots again.

  • Page 177: O Board Installation

    I/O Board Installation Identifying PCI Slots Selecting a Slot for Optimal Operation Installing a Board...
  • Page 178 I/O boards into the server. ! CAUTION Server options other than I/O boards require installation and configuration by a trained NEC technician. Identifying PCI Slots The PCIX unit has 14 PCI-X slots. One Basic I/O Board can be installed in this unit to support the standard I/O interface.
  • Page 179 Table 5-1. PCI Slot Allocation in the PCIX Unit Configuration Slot Number Board/Card Type Comments Basic I/O Board, PCI01 Basic I/O Board* DVD: Connected by IDE interface. VGA Board, PCI02 SCSI Card DAT: Connected by SCSI interface. SCSI Cards (for DAT and Device PCI03 VGA Card*...
  • Page 180 Table 5-2. PCI Slot Addressing in the PCIX Unit Physical Slot Speed Host Bus PCI Slot (MHz) Bridge (HBB) PCI Bus 5-4 I/O Board Installation...

  • Page 181: Selecting A Slot

    Selecting a Slot Installation can impact the operating frequency of a board. Note the following information before selecting a PCI slot: Note: See Figure 5-1, Table 5-1, Figure 5-2, and Table 5-2 for PCIX Unit slot locations and addressing. These tables and figures show slot frequencies, bus groups, and slot addressing information.

  • Page 182: Installing A Board In The Pcix Unit

    Installing a Board in the PCIX Unit Note: Before you install an I/O board, see the previous sections to choose the correct slot location for your board. ! CAUTION Electrostatic discharge (ESD) and ESD protection. ESD can damage disk drives, boards, and other parts. We recommend that you wear an antistatic wrist strap attached to chassis ground (any unpainted metal surface) on your system when handling parts.
  • Page 183 1. Check that the front stabilizer is in the pulled-out position. If not, remove the screw securing the stabilizer and pull it out (see Figure 5-3). Front Stabilizer Figure 5-3. Stabilizer and PCIX Unit Front Bezel 2. Remove the front bezel from the front of the PCIX unit by pulling it first from the bottom and then away from the top of the unit.
  • Page 184 4. Carefully and slowly pull the PCIX unit out of the cabinet until the side rails lock (click) in place. ! CAUTION Check that the cables at the rear of the cabinet are free from being pinched or damaged when you slide the PCIX unit forward.
  • Page 185 7. Replace the access cover (see Figure 5-5). Swing the cover back over the slots. Press the cover down and check that the cover latches are secured. ! CAUTION To prevent damage to the cover and chassis, check that the cover is secured and can clear the chassis when you slide the unit into the server.
  • Page 186 10. Connect any I/O board cable at the rear of the server. ! CAUTION When connecting a cable to an I/O board, be sure to leave enough cable free for sliding the PCIX unit chassis out of the cabinet. Route the cable so it does not get pinched or damaged.

  • Page 187: Problem Solving

    Problem Solving Solving Simple Problems Troubleshooting the System...

  • Page 188: Solving Simple Problems

    Some system problems are simple ones and easy to solve. Check the corrective actions to the general problems in the following table. If you still have a problem, record the conditions of the problem and contact your system administrator or NEC support personnel.
  • Page 189 Table 6-1. Checklist for Solving General Problems (cont’d) Symptom Corrective Action Nothing is displayed on the console. Check that the VGA card in the PCIX Unit and the (cont’d) console are connected properly. Cannot enter commands on the console. Check that the keyboard and mouse are connected properly.

  • Page 190: Troubleshooting The System

    Service Processor. Hardware diagnostics from LED status requires accessing boards integrated in the server. Hardware diagnostics should be done by trained NEC Support personnel. Record any error messages displayed on the console and provide the information to the NEC Support technician.

  • Page 191: A Technical Specifications

    Technical Specifications Main Cabinet DVD-ROM Drive Tape Drive...

  • Page 192: Main Cabinet

    This appendix provides the technical specifications for your server. Main Cabinet Table A-1 lists the technical specifications for the Main Cabinet. Table A-1. Main Cabinet Technical Specifications Item 16-Way System (1160Xd) 32-Way System (1320Xd) Cell Board Number of Cell Boards Up to 4 boards Up to 8 boards (two boards required for redundancy)
  • Page 193 Table A-1. Main Cabinet Technical Specifications (cont’d) Item 16-Way System (1160Xd) 32-Way System (1320Xd) Optional Units (cont’d) Magnetic Tape Unit Optional One unit in optional PCIX Unit DDS-4 4mm DAT device USB FDD Optional One unit in optional PCIX Unit USB interface Hard Disk Storage Optional...

  • Page 194: Dvd-Rom Drive

    DVD-ROM Drive Table A-2 lists the technical specifications for the DVD-ROM drive in the optional PCIX Unit. Table A-2. DVD-ROM Drive Technical Specifications Item Specification Media CD-ROM Mode 1, 656 MB Mode 2, 748 MB DVD-ROM Singe-sided, 4.7 GB Double-sided, 8.54 GB Data Transmission Rate CD-ROM: Max 7.2 MB/s DVD-ROM: Max 21.1 MB/s...

  • Page 195: Tape Drive

    Tape Drive Table A-3 lists the technical specifications for the optional tape drive in the optional PCIX Unit. Table A-3. Optional Tape Drive Technical Specifications Item Specification Corresponding standard and DDS4 150m 40GB memory capacity DDS3 125m 24GB DDS2 120m DDS1 4GB (Supports read-only) Average Transmission Rate...

  • Page 196: Fdd

    Table A-4 lists the technical specifications for the optional FDD drive in the optional PCIX Unit. Table A-4. Optional FDD Technical Specifications Item Specification Media 2HD: 2.0 MB or 1.6 MB 2DD: 1.0 MB Data 2HD: 500 kbits/s 2DD: 250 kbits/s Interface Dimensions Width:...

  • Page 197: B Memory Upgrades

    Memory Upgrades Memory Configurations DIMM Installation...

  • Page 198: Memory Configurations

    ! CAUTION Memory upgrades for your server require installation and configuration by trained NEC personnel. Memory Configurations Each Cell Board supports up to 32 DIMMs (16 on the Cell Board and 16 on the memory daughterboard) in the following configurations: Memory must be installed in groups of 4 DIMMs of the same capacity.
  • Page 199 Port 1 Port 0 R1 R3 R1 R3 R5 R7 R5 R7 R6 R4 R6 R4 R2 R0 R2 R0 DIMM (14) (10) (13) (9) (11) (15) (12) (16) (6) (2) (5) (1) (3) (7) (4) (8) A08BA09BA10BA11BA12BA13BA14BA15B A20BA21BA22BA23BA24BA25BA26BA27B Location Numbers in parenthesis ( ) indicate installation sequence.
  • Page 200 Tble B-1. DIMM Installation Installation DIMM DIMM Sequence in Sequence in Sequence Board Slot Location Figure B-1 Figure B-2 Cell Board A15B, A13B (1), (2) A20B, A22B (3), (4) Memory A09B, A07B (1), (2) Daughter- A14B, A16B (3), (4) board Cell Board A14B, A12B (5), (6)

  • Page 201: C Windows 2003 Installation

    Windows 2003 Installation Installing Microsoft Windows 2003 Creating a Mirrored Drive of Windows 2003...
  • Page 202 Express5800/1000 series server and for creating a mirrored drive of Windows 2003. Follow the procedures in sequence. Installing Microsoft Windows 2003 Use the following procedure to install Microsoft Windows 2003 on the NEC Express5800/1000 series server. Use a disk drive that does not contain any system partitions. A newly-formatted disk is best.
  • Page 203 You can now use text-based commands (MS-DOS) for Windows 2003. 8. If operating system redundancy is required, make a mirrored drive of Microsoft Windows 2003 on the NEC Express5800/1000 series server (see the next section). Creating a Mirrored Drive of Windows 2003 Use the following procedure to create a mirrored drive of Microsoft Windows 2003 on the Express5800/1000 series server.
  • Page 204 2. Delete any partition on Disk 1 (see the following example). Note: Use the following examples as a reference for performing the procedures. Information will vary for your computer and drives. C:\ >diskpart Microsoft DiskPart version 5.2.3790 Copyright (C) 1999-2001 Microsoft Corporation. On computer: Your Computer DISKPART>...
  • Page 205 5. Assign drive roles as shown below: DISKPART> select disk 0 Disk 0 is now the selected disk. DISKPART> select partition 1 Partition 1 is now the selected partition. DISKPART> assign letter=p DiskPart successfully assigned the drive letter or mount point. DISKPART>...
  • Page 206 10. Clone the Disk ID (GUID) as shown below. Note: Use the following examples as a reference for performing the procedures. Information will vary for your computer and drives. C:\ >bootcfg /list 0 Partition table info for Disk: 0 ----------------------------------- Partition No: Partition Style: GPT Starting offset: 32,256...
  • Page 207 12. Test the process: C:\ >bootcfg Test the clone by selecting it then booting. If the mirrored drive boots OK, then the process is complete. Windows 2003 Installation C-7...

  • Page 209: Index

    Index PS/2 mouse, 4-19 screen description, 4-5 1160Xd Security menu, 4-9, 4-29, 4-30 configuration, 1-5 serial port, 4-19 features, 1-4 Shrink Total of Interrupt Vectors, 4-55 specifications, A-2 starting, 4-4 1320Xd system date, 4-14 configuration, 1-6 System Hardware menu, 4-10, 4-31, 4-32 features, 1-4 system memory, 4-14 specifications, A-2...
  • Page 210 Commands (cont'd) normal mode, 3-16, 3-17 FDD, 1-11, A-6 Power Cycle, 3-15, 3-55 Features Shut Down System Power, 3-15, 3-19, 3-24 CELL Board, 1-9 SP Date and Time, 3-16, 3-26 components, 1-3, 1-4 System Dump, 3-15, 3-25 expansion, 1-14 Components, 1-10 partitioning, 1-2 Connector locations, 2-3 PCIX Unit, 1-10...
  • Page 211 Peripheral Configuration menu, 4-18, 4-19 Peripheral devices, 1-18, 2-3 Maintenance mode, 3-18 Power Bay Unit, 1-11, 1-18 Master iSP, 3-17 Power cycle, 3-15, 3-55 Memory Power on reset, 2-10 configuration, 1-17, B-2 Power Supply Modules, 1-4, 1-11, 1-18 support, 1-10 Powering off, 2-7 Message log, 3-16, 3-54 Powering on, 2-4...
  • Page 212 Startup, 2-4 System components, 1-10 configuration diagram, 1-17 date, 4-14 dump, 3-15, 3-25 expansion, 1-14, 1-17 functions, 1-12 Hardware menu, 4-31, 4-32 memory display, 4-14 serial port, 4-19 specifications, A-2 time, 4-14 System configurations, 1-4 Time, 3-26, 4-14 Troubleshooting, 6-2, 6-4 Undermined iSP, 3-17 USB FDD, 1-11, A-6 VGA monitor connector, 2-3...
  • Page 214 456-01686-000...

Table of Contents