Table of Contents
Advertisement
Loading the Rewind Spool on the Media Take-up Unit
2
Press ▲ or ▼ to select Yes, and then press the OK button.
The mode now switches from take-up mode to regular mode.
•
Note
3
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect the Settings/Adj. tab (
•
Note
4
Press the OK button.
The Set./Adj. Menu is displayed.
5
Press ▲ or ▼ to select Take-up Reel, and then press the OK button.
6
Press ▲ or ▼ to select Use Take-up Reel, and then press the OK button.
7
Press ▲ or ▼ to select Disable, and then press the OK button.
Loading the Rewind Spool on the Media Take-up Unit
Loading the Rewind Spool on the Media Take-up Unit
1
When using the Output Stacker, stow the Output Stacker before this procedure. (See "Storing the Output
Stacker.")
Important
550
The printer will also switch from take-up mode to regular mode if you lift the Release Lever and cut the roll with
scissors instead of pressing the Cut button.
).
If the Tab Selection screen is not displayed, press the Menu button.
P.546
➔
Position the Basket Cloth and Basket Rod so they do not
•
interfere with the Media Take-up Sensor (wave portion).
This may impair operation.
iPF8400S
User's Guide
- Quick Links:
- Blue Platen Switch Is Dirty
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
