Chapter 2
Message and Recovery Procedures
SW_MATM Messages
Error Message SW_MATM-4-MACFLAP_NOTIF: Host [enet] in [chars] [dec] is flapping
between port [chars] and port [chars]
SW_VLAN Messages
Error Message SW_VLAN-3-MALLOC_FAIL: Failed to allocate [dec] bytes
Error Message SW_VLAN-3-VLAN_PM_NOTIFICATION_FAILURE: VLAN Manager synchronization
failure with Port Manager over [chars].
Error Message SW_VLAN-3-VTP_PROTOCOL_ERROR: VTP protocol code internal error
[chars].
OL-9772-05
The switch found the traffic from the specified host flapping between the specified
Explanation
ports. [enet] is the host MAC address, [chars] [dec] is the switch ID, and the first and second [chars]
are the ports between which the host traffic is flapping.
Check the network switches for misconfigurations that might cause a
Recommended Action
data-forwarding loop.
Explanation
Memory allocation failed. [dec] is the number of bytes.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
The VLAN manager dropped a notification from the port manager because of a lack of
Explanation
ready pool space. [chars] is the type of port manager notification.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
The VTP code encountered an unexpected error while processing a configuration
Explanation
request, a packet, or a timer expiration. [chars] is the internal error.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
1-7.
1-7.
Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide
SW_MATM Messages
"Error
"Error
2-115