Integrated Devices Screen Details - Dell Precision Rack 7910 Owner's Manual
Hide thumbs
Also See for Precision Rack 7910:
- Owner's manual (121 pages) ,
- Quick start manual (2 pages) ,
- Setup manual (3 pages)
Table of Contents
Advertisement
Menu Item
Description
in order, as listed in the Hard-Disk Drive Sequence. This option is not enabled for
UEFI Boot Mode.
Boot Options
Configures the boot sequence and the boot devices.
Settings
Integrated NIC 1 Port 1 Partition 1
Boot Sequence
Integrated NIC 1 Port 1 Partition 1
IBA XE Slot 0100 v2308
Embedded SATA Port Optical Drive I
PLDS DVD+/-RW DS-8ABSH Hard Drive C
Hard-Disk Drive
This field specifies the order in which hard-disk drives will be configured in the
Sequence
system. The first hard drive in the system will be the bootable C:....(Press F1 for
more information) Embedded SATA Port Disk A: ST500UM001-1EK162
Integrated Devices screen details
You can use the Integrated Devices screen to view and configure the settings of all integrated devices
including the video controller, integrated RAID controller, and the USB ports.
You can view the Integrated Devices screen by clicking System Setup Main Menu → System BIOS →
Integrated Devices.
The Integrated Devices screen details are explained below.
Menu Item
Description
USB 3.0 Setting
Enables or disables the USB 3.0 support. Enable this option only if your operating
system supports USB 3.0. If you disable this option, devices operate at USB 2.0
speed. USB 3.0 is set to Auto by default
User Accessible
Enables or disables the USB ports. Selecting Only Back Ports On disables the front
USB Ports
USB ports, selecting All Ports Off disables all USB ports. The USB keyboard and
mouse operates during boot process in certain operating systems. After the boot
process is complete, the USB keyboard and mouse do not work if the ports are
disabled.
Internal USB Port
Enables or disables the internal USB port. By default, the option is set to Enabled.
Integrated
Enables or disables the integrated network card.
Network Card 1
I/OAT DMA Engine Enables or disables the I/OAT option. Enable only if the hardware and software
support the feature.
Embedded Video
Enables or disables the Current state of Embedded Video Controller is Enabled.
Controller
Current State of Embedded Video Controller is a read only field, indicating the
current state for the Embedded Video Controller. If the Embedded Video Controller
is the only display capability in the system (that is, no add-in graphics card is
NOTE: Selecting Only Back Ports On and All Ports Off will disable the USB
management port and also restrict access to iDRAC features.
131
- Quick Links:
- Hard Drives
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
