Installing An Internal Sd Card; Removing The Internal Dual Sd Module - Dell Precision Rack 7910 Owner's Manual
Hide thumbs
Also See for Precision Rack 7910:
- Owner's manual (121 pages) ,
- Quick start manual (2 pages) ,
- Setup manual (3 pages)
Table of Contents
Advertisement
Installing an internal SD card
1.
Ensure that you read the
2.
Follow the procedure listed in
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: To use an SD card with your system, ensure that the Internal SD Card Port is enabled in the
System Setup.
1.
Locate the SD card connector on the internal dual SD module system motherboard.. Orient the SD
card appropriately and insert the contact-pin end of the card into the slot.
NOTE: The slot is keyed to ensure correct insertion of the card.
2.
Press the card into the card slot to lock it into place.
1.
If removed, replace the cooling shroud.
2.
Follow the procedure listed in
To see a video on how to remove & install the internal dual SD module and SD cards, scan this QR code,
or click here:
http://www.Dell.com/QRL/Workstation/R7910/IDSM
Removing the internal dual SD module
1.
Ensure that you read the
2.
Follow the procedure listed in
Safety
instructions.
Before working inside your
After working inside your
Safety instructions
.
Before working inside your
system.
system.
system.
67
- Quick Links:
- Hard Drives
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
