Factory Preset Display Modes; Panel Specification - Lenovo L1900P Service Manual

19" lcd color monitor

Hide thumbs Also See for L1900P:

Table of Contents

19" LCD Color Monitor

Lenovo L1900P

4.2 Factory Preset Display Modes

4.3.1 General Features

LM190E08-TLJ1 is a Color Active Matrix Liquid Crystal Display with an integral Cold Cathode Fluorescent Lamp

(CCFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element. It is a transmissive

type display operating in the normally white mode. It has a 19.0 inch diagonally measured active display area with

SXGA resolution (1024 vertical by 1280 horizontal pixel array) Each pixel is divided into Red, Green and Blue

sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is

determined with an 8-bit gray scale signal for each dot, thus, presenting a palette of more than 16,7M colors with

Advanced-FRC (Frame Rate Control). It has been designed to apply the interface method that enables low power,

high speed, low EMI. FPD Link or compatible must be used as a LVDS (Low Voltage Differential Signaling) chip. It is

intended to support applications where thin thickness, wide viewing angle, low power are critical factors and graphic

displays are important. In combination with the vertical arrangement of the sub-pixels, the LM190E08-TLJ1

characteristics provide an excellent flat panel display for office automation products such as monitors.

4.3.2 Display Characteristics

Table of Contents

Show Quick Links

Table of Contents