Water Inlet Fault - Miele G 6300 Operating Instructions Manual
Hide thumbs
Also See for G 6300:
- Operating and installation instructions (165 pages) ,
- Operating instructions manual (92 pages) ,
- Operating and installation instructions (160 pages)
Table of Contents
Advertisement
Problem solving guide
Water inlet fault
Problem
One of the following
messages appears in
the display:
Open stopcock
Water intake
The following message
appears in the display
during the
SolarSave
gramme:
Intake temp. low
72
Possible cause and remedy
The tap is turned off.
Turn on the tap fully.
Before rectifying the problem, you must:
Switch the dishwasher off with the button.
Water intake is restricted.
Turn on the tap fully and start the programme
again.
Clean the water inlet filter (see "Maintenance").
The water pressure at the intake is lower than 30
kPa (0.3 bar).
Seek professional advice.
The intake water has not reached the required tem‐
perature of 45°C (see "Water connection - Connec‐
pro‐
tion to the water supply").
Start the programme again.
If the fault message appears again, select a differ‐
ent programme.
- Quick Links:
- Problem Solving Guide
- Time of Day
Hide quick links:
Advertisement
Table of Contents
